Pump泵
类型Type:Dual-piston (in series), microprocessor controlled, constant 10 mm primary stroke length, variable speed Isokinetic with Eluent Precompression
组成Construction: Chemically inert, metal-free PEEK pump heads and flow path; compatible with aqueous eluents from pH 0–14 and reversed-phase solvents such as methanol and acetonitrile
Pressure Range 0–41 MPa (0–6000 psi)
Flow Rate Range 0.000–10.000 mL/min with ability to set flow increments at 0.001 mL/min
Flow Rate Precision < ±0.1%
Flow Rate Accuracy < ±0.1%
Pressure Ripple < 1% at 1.0 mL/min, typical
Vacuum Degasser Integrated, optional
Piston Seal Wash Optional, automatic operation
Eluent On/Off Valve Electrically actuated, standard
Leak Sensor Optical, standard
淋洗液发生器Eluent Generator
Eluent Types Up to two eluent generator cartridges
KOH, LiOH, NaOH; Carbonate; Carbonate/Bicarbonate; MSA
Eluent Concentration Range 0.1–100 mM
Flow Rates 0.1–3 mL/min
1.0 mL/min eluent concentration is limited
Maximum Operating Pressure Dionex EGC 500 cartridge: 35 MPa (5000 psi)
Maximum Solvent Concentration Cations: 0%
Anions (hydroxide): 25% methanol (KOH, NaOH and LiOH cartridges);
Anions (carbonate/bicarbonate): None
Gradient Profiles Standard - any combination of linear, convex and concave positive and negative gradient profiles
柱温箱Column Compartment
Injection Valves Up to two high-pressure valves, either 6- or 10-port
Columns Supported Up to two 1-9 mm i.d., maximum length 250 mm analytical column with
50 mm guard column
Constant Temperature Zone Optional
Temp. Range: 30 to 80 °C (86 to 176 °F); minimum 5 °C above ambient
Temperature Accuracy: ±0.5 °C at 30 °C)
Temperature Stability: ±0.2 °C (at 30 °C)
Time to Equilibration (ambient to ambient plus 20 °C): 20 minutes
检测器Detector Compartment
Constant Temperature Zone Optional
Temp. Range: 15 (or 20 °C below ambient) to 40 °C (59 to 104 °F)
Temperature Accuracy: ±0.5 °C (at 15 °C)
Temperature Stability: ±0.2 °C (at 15 °C)
Time to Equilibration (ambient to ambient minus 20°C): 30 minutes
抑制模式Suppression Modes
Chemical Suppression: 2 mm and 4 mm, anion and cation, membrane suppression
Electrolytic Suppression Recycle Mode: 2 mm and 4 mm, anion and cation, membrane suppression
Electrolytic Suppression External Water Mode:2 mm and 4 mm, anion and cation, membrane suppression
Non-Suppressed Conductivity: Supported - both anion and cation
电导检测器Conductivity Detector
Electronics Type Microprocessor controlled digital signal processing, autoranging
Cell Drive 8 kHz square wave
Linearity 1%
Resolution 0.00238 nS/cm
Output Range Digital Signal Range: 0–15,000 µS/cm
Analog Signal Range: 0–15,000 µS/cm
Noise, Wet ≤ 0.2 nS at 23 µS/cm background
≤ 0.1 nS at 1 µS/cm background
Filter Rise times 0 to 10 s, programmable
Sampling Rate 1 to 100 Hz, user settable or automatic
Cell Temperature 7 °C above ambient to 60 °C maximum
Cell Temperature Stability < 0.001 °C
Cell Temperature Compensation Default 1.7% per °C; programmable from 0–3% per °C
Flow Cell Maximum Pressure 10 MPa (1500 psi)
Flow Cell Volume 0.7 µL
Cell Electrodes Passivated 316 stainless steel. Compatible with MSA
Cell Body Chemically inert polymeric material
Heat Exchanger Inert, tortuous-path for low longitudinal dispersion
电化学检测器Electrochemical Detector
Electronics Type Microprocessor controlled digital signal processing
Electronic Noise, Wet IPAD (Au electrode) < 50 pC at 10 mM KOH, DC Amperometry (GC) < 10 pA
Potential Range -2.0 to 2.0 V in 0.001 V increments
Signal range (Digital and Analog) Integrated Amperometry: 50 pC to 200 µC DC Amperometry: 5 pA to 74 µA
Filter 0–10 s response time, user settable
Control Mode Local or remote control using relay closures or TTL, or control using Chromeleon CDS software via
DC module
Cell Body Titanium body. Compatible with 2–7 mm i.d. columns
Working Electrodes Conventional: gold, glassy carbon, platinum, and silver
Disposable: gold, platinum, carbon, and silver
Reference Electrode pH-Ag/AgCl combination, one piece design
PdH, one piece design
Autoranging Yes
Analog Output User selectable full scale of 10, 100, or 1000 mV
Cell Volume at Working Electrode < 0.2 µL
Maximum Cell Operating Pressure 0.7 MPa (100 psi)
供电Internal Power Supplies
Internal Power supplies Constant current (CC) or constant voltage (CV) power supplies
Option 1: 1 channel CC [0 - 500 mA] or CV [0 – 36 V]
Option 2: 2 channels CC [0 - 500 mA] or CV [0 – 36 V]
Option 3: 1 channel CC [0 - 500 mA] & 2 channels CC [0 - 500 mA] or CV [0 – 36 V]
Option 4: 1 channel CC [0 - 500 mA] & 4 channels CC [0 - 500 mA] or CV [0 – 36 V]
Product
系统软件System Software
Software Chromeleon CDS software, version 7.2 or higher
Automated Workflow Wizards Standard feature
System Smart Startup and Shutdown Standard feature
Automation Support of 3rd Fully controls over 400 different instruments from more than 30 manufacturers, including GC, HPLC,
Party Instruments and MS
Customizable System Control Panels Standard feature
Signal Channels Detector signals and pump pressure as standard
Data Trending Plots All numerical device parameters
System Status Virtual Channels Standard feature
Network Failure Protection Standard feature for networked installations
System Trigger Commands and Conditionals:Standard feature
Daily Audit Trail Standard feature
Sample Audit Trail Standard feature
System Calibration Storage Factory, present and previous. Completely user selectable.
Customized Reporting Standard feature with unlimited report sheets
GLP Compliance Optional
物理性能Physical Specifications
Power Requirements 100–240 V ac, 50-60 Hz autoranging
Operating Temperature 4–40 °C (40–104 °F); cold-room compatible (4 °C) as long as system power remains on
Operating Humidity Range 5–95% relative, noncondensing
Control Modes Full control through front panel and Chromeleon CDS software; alternative control through TTL or relay
closures; two relay outputs, two TTL outputs, four programmable inputs
USB Communication Protocol One USB input; one built-in two-output USB hub
Leak Detection Built-in, optical sensor
Dimensions (h × w × d) 62.5 × 30.0 × 55.9 cm
(24.6 × 11.8 × 22 inches)
Weight 41 kg (90 lb)
赛默飞新推出的Dionex Integrion高压离子色谱系统非常直观、简洁易用,并具有应对挑战性实验室工作流程的能力。这也是自从赛默飞从2011年收购戴安公司以来的推出的第一款新的离子色谱系统。
该HPIC系统采用了以前只在高端系统中才使用的功能,包括高压和选择性的电化学检测器。拥有简单、合理的流路设计和集成性能的功能,包括全系统智能监控,并在稳定可靠的情况下提供更快的运行速度。
具有以下功能:
1、易于安装的IC PEEK Viperpei配件,使操作简单,减少峰扩散和谱带增宽,提高色谱分辨率。
2、本地语言支持的平板电脑,即使远离仪器也能灵活地与IC控制器相连。
3、 通过消耗品设备监控记录追踪系统和消耗品性能,调试安装错误,将数据存储于安全的云服务器上,提高预防性维修和zei大运行时间。
4、热稳压器舱延长消耗品的寿命。
5、赛默飞变色龙数据软件系统(CDS)简化工作流程,从而大大节省了从样本到结果的时间。
6、 自动生成洗脱液。
除厂家/中国总经销商外,我们找不到 Dionex Integrion(IN) HPIC 高压离子色谱系统 的一般经销商信息,有可能该产品在中国没有其它经销商。
如果您是,请告诉我们,我们的邮件地址是:sales@antpedia.net 请说明: 1.产品名称 2.公司介绍 3.联系方式 |
售后服务
我会维修/培训/做方法
如果您是一名工程师或者专业维修科学 仪器的服务商,都可参与登记,我们的平台 会为您的服务精确的定位并展示。