01.040.25 (Manufacturing engineering (Vocabularies 标准查询与下载

ASTM D2825-13 磨料及其相关材料的标准术语

0

Standard Terminology Relating to Polishes and Related Materials

ASTM A976-13 与绝缘能力和应用相关的复合绝缘涂层标准分类

4.1 This classification establishes categories of insulating coatings based on their chemical nature, relative insulating ability, and typical applications. These categories describe general physical and chemical characteristics of the coatings that are useful in making broad estimates of their insulating ability and suitability for various applications. 1.1 This document classifies insulating coatings for electrical steels according to their composition, relative insulating ability, and functionality. The purpose of this classification is to assist users of insulating coatings by providing general information about the chemical nature and use of the coatings, as well as to provide important data concerning limits to their use, that is, relative insulating ability, punchability, temperature stability, weldability, and fabricability. Specific surface insulation resistivity values for each coating are not included in this classification. The user is referred to the flat-rolled electrical steel specifications noted in 1.2 should more detailed information concerning surface insulation resistivity values be required. 1.2 This classification is to be used in conjunction with the various specifications for flat-rolled electrical steels under the jurisdiction of Committee A06, including Specifications A345, A677, A683, A726, A840, and A876. However, in those instances in which the coating descriptions and characteristics differ between this classification and any of the specifications, this classification shall supersede the specification. 1.3 The values stated in customary (cgs-emu and inch-pound) units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application

ASTM ISO/ASTM 52921-13 叠层制造中所用标准术语: 坐标系统和测试方法

1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing.NOTE 1桾he applicability of this standard to cladding has to be evaluated. Discussions are under progress.NOTE 2桸on-cartesian systems are not covered by this standard.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Terminology for Additive Manufacturing-Coordinate Systems and Test Methodologies

ASTM F2792-12a 添加剂制造技术的标准术语

The definitions of the terms presented in this standard were created by this subcommittee. This standard does not purport to address safety concerns associated with the use of AM technologies. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use of additive manufacturing.1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with additive-manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media and others. Note 18212;The subcommittee responsible for this standard will review definitions on a three-year basis to determine if the definition is still accurate as stated. Revisions will be made when determined to be necessary.

Standard Terminology for Additive Manufacturing Technologies^,

ASTM F2792-12 添加剂制造技术的标准术语

The definitions of the terms presented in this standard were created by this subcommittee. This standard does not purport to address safety concerns associated with the use of AM technologies. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use of additive manufacturing.1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with additive-manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media and others. Note 18212;The subcommittee responsible for this standard will review definitions on a three-year basis to determine if the definition is still accurate as stated. Revisions will be made when determined to be necessary.

Standard Terminology for Additive Manufacturing Technologies^,

ASTM F2921-11e2 叠层制造中所用标准术语: 坐标系统和测试方法

1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing.Note 1???The applicability of this standard to cladding has to be evaluated. Discussions are under progress. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Terminology for Additive Manufacturingmdash;Coordinate Systems and Test Methodologies

ASTM F2921-11e1 叠层制造中所用标准术语: 坐标系统和测试方法

1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with coordinate systems and testing methodologies for additive manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media, and others, particularly when reporting results from testing of parts made on AM systems. Terms included cover definitions for machines/systems and their coordinate systems plus the location and orientation of parts. It is intended, where possible, to be compliant with ISO 841 and to clarify the specific adaptation of those principles to additive manufacturing. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Terminology for Additive Manufacturingmdash;Coordinate Systems and Test Methodologies

ASTM F2792-09 掺料生产工艺的标准术语

3.1 The definitions of the terms presented in this standard were created by this subcommittee. This standard does not purport to address safety concerns associated with the use of AM technologies. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use of additive manufacturing.1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with additive-manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media and others. Note 18212;The subcommittee responsible for this standard will review definitions on a three-year basis to determine if the definition is still accurate as stated. Revisions will be made when determined to be necessary.

Standard Terminology for Additive Manufacturing Technologies

ASTM F2792-09e1 添加剂制造技术的标准术语

3.1 The definitions of the terms presented in this standard were created by this subcommittee. This standard does not purport to address safety concerns associated with the use of AM technologies. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use of additive manufacturing.1.1 This terminology includes terms, definitions of terms, descriptions of terms, nomenclature, and acronyms associated with additive-manufacturing (AM) technologies in an effort to standardize terminology used by AM users, producers, researchers, educators, press/media and others. Note 18212;The subcommittee responsible for this standard will review definitions on a three-year basis to determine if the definition is still accurate as stated. Revisions will be made when determined to be necessary.

Standard Terminology for Additive Manufacturing Technologies

ASTM B374-06 电镀的相关标准术语

Standard Terminology Relating to Electroplating

ASTM A976-03 与绝缘能力和应用相关的复合绝缘涂层的标准分类

This classification establishes categories of insulating coatings based on their chemical nature, relative insulating ability, and typical applications. These categories describe general physical and chemical characteristics of the coatings that are useful in making broad estimates of their insulating ability and suitability for various applications. FIG. 1 Apparatus of Surface Insulation Resistivity Measurement for Franklin Test FIG. 2 Diagram of Connections for Contacts and Resistors for Franklin Test1.1 This document classifies insulating coatings for electrical steels according to their composition, relative insulating ability, and functionality. The purpose of this classification is to assist users of insulating coatings by providing general information about the chemical nature and use of the coatings, as well as to provide important data concerning limits to their use, that is, relative insulating ability, punchability, temperature stability, weldability, and fabricability. Specific surface insulation resistivity values for each coating are not included in this classification. The user is referred to the flat-rolled electrical steel specifications noted in should more detailed information concerning surface insulation resistivity values be required.1.2 This classification is to be used in conjunction with the various specifications for flat-rolled electrical steels under the jurisdiction of Committee A06, including Specifications A 345, A 677, A 683, A 726, A 840, and A 876. However, in those instances in which the coating descriptions and characteristics differ between this classification and any of the specifications, this classification shall supersede the specification.1.3 The values stated in customary (cgs-emu and inch-pound) units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units which are provided for information only and are not considered standard.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application

ASTM C286-99(2004) 搪瓷和陶瓷的涂金属装置相关标准术语

1.1 These definitions pertain to the terminology used in the porcelain enamel and ceramic-coated metal industries. 1.2 Words adequately defined in standard dictionaries are not included. Included are words that are peculiar to these industries. 1.3 Hyphenated words, double words, or phrases are listed alphabetically under the first word; additional important words are cross-referenced. 1.4 When a word or phrase, listed as a synonym, is not separately defined, the defined word or phrase is the accepted or preferred form.

Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

ASTM C286-99 搪瓷和陶瓷的涂金属装置相关标准术语

1.1 These definitions pertain to the terminology used in the porcelain enamel and ceramic-coated metal industries. 1.2 Words adequately defined in standard dictionaries are not included. Included are words that are peculiar to these industries. 1.3 Hyphenated words, double words, or phrases are listed alphabetically under the first word; additional important words are cross-referenced. 1.4 When a word or phrase, listed as a synonym, is not separately defined, the defined word or phrase is the accepted or preferred form.

Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

ASTM A976-97 与绝缘能力和应用相关的复合绝缘涂层的标准分类

1.1 This document classifies insulating coatings according to their composition, insulating ability, and functionality. The purpose of this classification is to assist users of insulating coatings by providing general information about the chemical nature and use of the coatings, as well as to provide important data concerning limits to their use, that is, relative insulating ability, punchability, temperature stability, weldability, and fabricability. Specific surface insulation resistivity values for each coating are not included in this classification. The user is referred to the flat-rolled electrical steel specifications noted in 1.2 should be more detailed information concerning surface insulation resistivity values be required.

Standard Classification of Insulating Coatings by Composition, Relative Insulating Ability and Application

ASTM D2825-96 抛光剂及相关材料的术语定义

Standard Terminology Relating to Polishes and Related Materials

ASTM B374-96(2003) 电镀的相关标准术语

Standard Terminology Relating to Electroplating

ASTM E41-92(1998) 与状态调节相关的术语

1.1 These definitions pertain to the conditioning of materials for test purposes. Unless otherwise specified, they are intended to apply to all cases where combinations of atmospheric influences are an essential part of the testing of materials. 1.2 It is the intent of this standard to include those conditioning terms in wide use in ASTM for which standard definitions appear desirable.

Terminology Relating to Conditioning