01.040.83 橡胶和塑料工业 (词汇) 标准查询与下载

GB/T 41924.2-2022 轻型输送带 第2部分：等同术语表

本文件界定了轻型输送带的中文、英语、法语、俄语、德语、西班牙语、意大利语和日语的系列等同术语。 本文件适用于轻型输送带。

Light conveyor belts—Part 2：List of equivalent terms

ASTM F538-24 与轮胎特性和性能有关的标准术语

Standard Terminology Relating to Characteristics and Performance of Tires

ASTM D883-24 塑料相关标准术语

Standard Terminology Relating to Plastics

ASTM D883-23 与塑料有关的标准术语

Standard Terminology Relating to Plastics

ASTM D8065/D8065M-16(2023) 塑料薄膜规范的标准分类系统和依据

Standard Classification System and Basis for Specification for Specifying Plastic Films

ASTM D5538-13(2023) 热塑性弹性体术语和缩写的标准实施规程

1.1 This practice covers a uniform, consensus nomenclature approach for thermoplastic elastomers. This compilation is intended to accommodate and supplement any existing trade names and trademarks. 1.2 No attempt is made to develop an exclusively systematic process for nomenclature and abbreviations. 1.3 In technical papers and other technical or trade literature the full name of the thermoplastic elastomer should be given at its first appearance in the document along with its abbreviation in parentheses. In all subsequent references to the thermoplastic elastomer, the abbreviation may be given. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations

ASTM D7849-23 D24委员会标准物质命名标准分类

1.1 This classification covers instructions for naming the reference materials used by Committee D24. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Nomenclature of Reference Materials of Committee D24

ASTM D4000-23 指定塑料材料的标准分类系统

1.1 This standard provides a classification system for tabulating the properties of unfilled, filled, and reinforced plastic materials suitable for processing into parts. NOTE 1—The classification system serves many of the needs of industries using plastic materials. The standard is subject to revision as the need requires; therefore, the latest revision should always be used. 1.2 The classification system and subsequent line call-out (specification) is intended to be a means of identifying plastic materials used in the fabrication of end items or parts. It is not intended for the selection of materials. Material selection should be made by those having expertise in the plastics field after careful consideration of the design and the performance required of the part, the environment to which it will be exposed, the fabrication process to be employed, the inherent properties of the material not covered in this document, and the economic factors. 1.3 This classification system is based on the premise that plastic materials can be arranged into broad generic families using basic properties to arrange the materials into groups, classes, and grades. A system is thus established which, together with values describing additional requirements, permits as complete a description as desired of the selected material. 1.4 In all cases where the provisions of this classification system would conflict with the referenced ASTM specification for a particular material, the latter shall take precedence. NOTE 2—When using this classification system the two-letter, threedigit suffix system applies. NOTE 3—When a material is used to fabricate a part where the requirements are too specific for a broad material call-out, it is advisable for the user to consult the supplier to secure a call-out of the properties to suit the actual conditions to which the part is to be subjected. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification System for Specifying Plastic Materials

ASTM D3053-23 炭黑相关标准术语

1.1 This terminology covers a compilation of definitions of technical terms used in the carbon black and rubber industries. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Carbon Black

ASTM D883-22 塑料相关标准术语

1.1 This terminology covers definitions of technical terms used in the plastics industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 When a term is used in an ASTM document for which Committee D20 is responsible it is included only when judged, after review, by Subcommittee D20.92 to be a generally usable term. 1.3 Definitions that are identical to those published by another standards body are identified with the abbreviation of the name of the organization; for example, IUPAC is the International Union of Pure and Applied Chemistry. 1.4 A definition is a single sentence with additional information included in discussion notes. It is reviewed every 5 years; the year of last review is appended. 1.5 For literature related to plastics terminology, see Appendix X1. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Plastics

ASTM F538-22 与轮胎的特点及性能相关的术语

1.1 This terminology primarily covers definitions for technical terms that occur in ASTM Committee F09 standards on the characteristics and performance of tires. 1.2 Definitions for terms that may also be used in other technologies, such as vehicle behavior, are worded to cover both areas. 1.3 When any definition in this terminology (that does not have the limiting phrase) is quoted out of context, editorially insert the limiting phrase in a tire after the dash following the term. This will properly limit the field of application of the term and definition. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Characteristics and Performance of Tires

QB/T 5785-2022 塑料除水母料

Plastic Dewatering Masterbatch

ASTM D3053-22 炭黑的相关标准术语

1.1 This terminology covers a compilation of definitions of technical terms used in the carbon black and rubber industries. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Carbon Black

ASTM D6085-97(2022) 橡胶试验中取样的标准实施规程术语和基本概念

1.1 This practice covers a standardized terminology and some basic concepts for testing and sampling across the broad range of chemical and physical testing operations characteristic of the rubber and carbon black manufacturing industries. 1.2 In addition to the basic concepts and terminology, a model for the test measurement process is given in Annex A1. This serves as a mathematical foundation for the terms and other testing concepts. It may also find use for further development of this practice to address more complex sampling operations. 1.3 This general topic requires a comprehensive treatment with a sequential or hierarchical development of terms with substantial background discussion. A number of ancillary terms are also given that make for a more self-contained document. This cannot be accommodated in Terminology D1566. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Sampling in Rubber Testing—Terminology and Basic Concepts

EN ISO 18064:2022 热塑性弹性体.术语和简化术语

This document establishes a nomenclature system for thermoplastic elastomers based on the chemical composition of the polymer or polymers involved. It specifies symbols and abbreviated terms used to identify thermoplastic elastomers in industry, commerce, and government. It is not intended to conflict with, but to supplement, existing trade names and trademarks. NOTE 1 The name of the thermoplastic elastomer is intended to be used in technical papers and presentations followed by the abbreviated term used to designate the elastomer in this document. NOTE 2 Annex A gives thermoplastic-elastomer abbreviated terms that have been used in the past in materials standards, technical bulletins, textbooks, patents, and trade literature.

Thermoplastic elastomers - Nomenclature and abbreviated terms (ISO 18064:2022)

ASTM D1566-21a 与橡胶有关的标准术语

1.1 This terminology covers definitions of technical terms used in the rubber industry. Terms that are generally understood or adequately defined in other readily available sources are not included. 1.2 Definitions for terms that have been established by other bodies recognized as expert in the field will, after ballot approval, be inserted in this terminology without change, and the source of the definition will be identified. Exceptions to this rule will be where the meaning of the term as used in the rubber industry is different from the common meaning of the term. 1.3 Users of this terminology who require mathematical expressions for the time and temperature dependent physical properties of some terms found in this standard should refer to Guide D5992 and other standards listed under referenced documents. Selected terms from Guide D5992 may be found in Annex A1. 1.4 Although this terminology standard avoids the inclusion of jargon and archaic terms as much as possible, some terms have been retained for historical reasons. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology Relating to Rubber

DIN ISO 4223-1:2021 轮胎行业中使用的一些术语的定义 第1部分：充气轮胎（ISO 4223-1:2017）

This document defines a number of significant terms related to pneumatic tyres used in the tyre industry, together with corresponding codes, symbols and values.

Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres (ISO 4223-1:2017)

PN-EN ISO 3219-1-2021-10 E 流变学 第1部分：旋转和振荡流变测量的词汇和符号（ISO 3219-1:2021）

Rheology -- Part 1: Vocabulary and symbols for rotational and oscillatory rheometry (ISO 3219-1:2021)

ASTM D4092-21 塑料的标准术语:动态机械性能

1.1 This terminology is a compilation of definitions and descriptions of technical terms used in dynamic mechanical property measurements on polymeric materials, including solutions, melts, and solids. Terms that are generally understood or defined adequately in other readily available sources are either not included or sources identified. 1.2 A definition is a single sentence with additional information included in notes. It is reviewed every five years and the year of the last review or revision is appended. 1.3 Definitions identical to those published by another standards organization or ASTM committee are identified with the abbreviation of the name of the organization or the ASTM committee. 1.4 Descriptions of terms specific to dynamic mechanical measurements are identified with an italicized introductory phrase. NOTE 1—This terminology standard is similar to ISO 6721–1 however, the ISO document cites fewer terms. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Terminology for Plastics: Dynamic Mechanical Properties

ASTM F1806-21 轮胎试验操作的标准实施规程-参考轮胎使用的基本概念和术语

1.1 This practice presents some basic concepts for tire testing and a standard set of terms relating to the use of reference tires frequently used for comprehensive tire testing programs. The tests may be conducted in a laboratory on various dynamometer wheels or other apparatus as well as at outdoor proving ground facilities. The overall objective of this practice is to develop some elementary principles for such testing and standardize the terms used in these operations. This will improve communication among those conducting these tests as well as those using the results of such testing. 1.2 In addition to the basic concepts and terminology, a statistical model for tire testing operations is also presented in Annex A1. This serves as a mathematical and conceptual foundation for the terms and other testing concepts; it will improve understanding. The annex can also serve for future consultation as this practice is expanded to address additional aspects of the testing process. 1.3 This overall topic requires a comprehensive treatment with a sequential or hierarchical development of terms with substantial background discussion. This cannot be accommodated in Terminology F538. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use