共找到 388 条与 建筑材料和建筑物 (词汇) 相关的标准,共 26 页
1.1 This terminology covers terms, definitions of terms, descriptions of terms, nomenclature, and explanations of abbreviations, acronyms, and symbols specifically associated with standards under the jurisdiction of ASTM Committee C12 on Mortars and Grouts for Unit Masonry. 1.2 The definitions and descriptions of terms in this terminology pertain to Test Methods C780, C1019, C1148, C1324, and C1403; Specifications C144, C270, C404, C476, C887, and C1384; Practice C946; and Guide C1586. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology of Mortar and Grout for Unit Masonry
Dimension stone, as used here, is natural stone that has been selected and fabricated to specific sizes or shapes, with or without one or more mechanically dressed or finished surfaces, for use as building facing, curbing, paving stone, monuments and memorials, and various industrial products. The term dimension stone is in contradistinction to crushed and broken stone, such as is used for aggregate, roadstone, fill, or chemical raw materials. Because all stone is a natural material, the definition excludes all manmade materials that simulate stone. In common practice, some dimension stones are reinforced, filled, or surface treated. Terms used in definitions and nomenclature shall be interpreted in accordance with commonly accepted scientific and technical terms of the geological sciences except as otherwise specifically noted. Examples of such exceptions are the broader commercial definitions of granite and marble, which have become well established in the dimension stone industry and trade. Definitions and terms included in these definitions have been formulated in accordance with common industrial usage where this is not in conflict with current scientific usage.
Standard Terminology Relating to Dimension Stone
海峡两岸无障碍设施术语对照
Comparison of terms of cross-strait barrier-free facilities
1 范围 2 规范性引用文件 3 术语和定义 4 组分与材料 5 技术要求 6 分类与标记 7 试验方法 8 检验规则 9 标志、包装、运输和贮存 附录A (规范性) 水泥和混凝土用偏高岭土基掺合料流动度比、活性指数的测定
Metakaolin-based composite admixtures for cement and concrete
Construction project document archiving and transfer standards
Safety management data standards for housing construction and municipal infrastructure projects
Technical standards for thin mortar joint walls of autoclaved sand aerated concrete blocks
Construction engineering data management standards
Technical standards for prevention and control of common quality problems in residential projects
1.1 This standard provides definitions, symbols, units, and abbreviations of terms used in ASTM standards pertaining to thermal insulating materials, and to materials associated with them. 1.2 This terminology is not intended to be used to classify insulation materials as having particular properties. Rather, classification of insulation materials is to be done by the material standards themselves. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology Relating to Thermal Insulation
本规程主要内容包括:总则、术语、基本规定、原材料、混凝土配合比、生产过程控制、施工过程控制、技术资料归集、质量责任等。具体主要是对铁矿废石、铁矿废石骨料、铁矿废石骨料混凝土做出明确的规范与要求。
Technical regulations for iron ore waste aggregate concrete
全氟己酮灭火系统的设计、施工和验收
Technical standard for application of perfluorohexanone fire extinguishing system
1.1 This terminology consists of terms and definitions pertaining to the description, measurement, prediction, improvement, and management of buildings and buildingrelated facilities, and, in particular, terms related to the standards generated by ASTM Committee E06 on Performance of Buildings. 1.2 The purpose of this terminology is to provide meanings and explanations of technical terms, written for both the technical expert and the non-expert user. 1.3 This terminology is one of a group of special terminologies, subsidiary to the comprehensive Terminology E631. 1.4 Terms are listed in alphabetical sequence. Compound terms appear in the natural spoken order. Where definitions herein are adopted from other sources, they are copied exactly. The source is identified at the right margin following the definition and is listed in Section 2. The equivalent term in French is listed in parentheses after the English term. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology of Facility Management (Building-Related)
Prefabricated building evaluation standards
Acceptance standards for green building projects
Standard Terminology Relating to Clay Products
1.1 This standard incorporates generic terms and generic definitions of terms specifically associated with manufactured masonry units and masonry constructed with manufactured masonry units. These generic terms and definitions are used within the standards developed by Committee C12 on Mortars and Grouts for Unit Masonry and Committee C15 on Manufactured Masonry Units. 1.2 This standard incorporates terms and definitions of terms associated with the standards specific to clay masonry units, in particular to Specifications C32, C34, C56, C62, C126, C212, C216, C279, C410, C530, C652, C902, C1088, C1167, C1261, C1272, and C1405, and to Test Methods C67/C67M. 1.3 This standard incorporates terms and definitions of terms associated with the standards specific to concrete masonry units in particular to Specifications C55, C73, C90, C129, C139, C744, C1319, C1372, C1491, C1623, and C1634 and to Test Methods C140/C140M, C426, and C1262/ C1262M. 1.4 This standard incorporates terms and definition of terms associated with the standards specific to autoclaved aerated concrete masonry units in particular to Practice C1692 and to Specifications C1386, C1691, and C1693. 1.5 This standard incorporates terms and definitions of terms associated with the standards specific to clay and concrete roofing tile units in particular to Specifications C1167 and C1492 and to Test Methods C1568, C1569, and C1570. 1.6 For terminology specific to mortar and grout, see Terminology C1180. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Terminology for Masonry
Windows and pedestrian doors. Vocabulary
Evaluation Standards for Operation and Management of Urban Heating Enterprises
Application technical standard of iron tailings sand concrete
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号