11.080.20 消毒剂和防腐剂 标准查询与下载
共找到 273 条与 消毒剂和防腐剂 相关的标准，共 19 页
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticical activity of chemical desinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1).
- ICS
- 11.080.20
- CCS
- C12
- 发布
- 2006-04-01
- 实施
- 2006-04-20
This European Standard specifies a test method simulating practical conditions for establishing whether a product for surgical hand disinfection reduces the release of hand flora according to requirements described in clause 4 when used for the disinfection of the clean hands of volunteers.
Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2)
- ICS
- 11.080.20
- CCS
- G04
- 发布
- 2006-02-17
- 实施
- 2006-02-17
This part of ISO 11138 provides specific requirements for test organisms, inoculated carriers and biological indicators intended for use in assessing the performance of sterilization processes employing moist heat as the sterilizing agent.
Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes
- ICS
- 11.080.20
- CCS
- C30
- 发布
- 2006
- 实施
Sterilization of care products.Chemical indicators. Part 4. Class 2 indicators for steam penetration test packs
- ICS
- 11.080.20
- CCS
- 发布
- 2006
- 实施
- 2007-06-01
Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2).
- ICS
- 11.080.20
- CCS
- C12
- 发布
- 2005-12-01
- 实施
- 2005-12-05
Sterilization of health care products - Chemical indicators - Part 1 : General requirements.
- ICS
- 11.080.20
- CCS
- C47
- 发布
- 2005-12-01
- 实施
- 2005-12-05
This European Standard specifies a method of test simulating practical conditions for establishing whether a product for surgical hand disinfection reduces the release of the hand flora according to requirements when used for disinfection of the clean hands of volunteers (subjects).
Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2); German version EN 12791:2005
- ICS
- 11.080.20
- CCS
- G77
- 发布
- 2005-10
- 实施
This standard specifies a test method simulating practical conditions for establishing whether a product for surgical hand disinfection reduces the release of hand flora according to requirements described in clause 4 when used for the disinfection of the clean hands of volunteers.
Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2)
- ICS
- 11.080.20
- CCS
- 发布
- 2005-09-29
- 实施
- 2005-09-29
Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2)
- ICS
- 11.080.20
- CCS
- 发布
- 2005-09-20
- 实施
- 2005-09-20
This document specifies a test method and the minimum requirements for virucidal activity of chemical disinfectants or antiseptic products for instruments, surfaces or hands that form a homogeneous physically stable preparation when diluted with hard water - or in the case of ready-to-use products - with water. This document is applicable to a broad spectrum of viruses (Annex B) and to areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example: — in hospitals, in community medical facilities, and in dental institutions; — in clinics of schools, of kindergartens, and of nursing homes; and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patients. It is impossible to determine the virucidal activity of the undiluted product as some dilution is always produced by adding the inoculum and interfering substance. However, a disinfectant or antiseptic which is used in undiluted form is tested in 80% concentration and shall pass this test prior to further assessment. NOTE 1 The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used. NOTE 2 This method corresponds to a phase 2, step 1 test (see Annex F).
Chemical disinfectants and antiseptics - Virucidal quantitative suspension test for chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- C12
- 发布
- 2005-05-12
- 实施
- 2005-05-12
This document specifies a test method and the minimum requirements for mycobactericidal (or tuberculocidal) activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water - or in the case of ready-to-use products - with water. Products can only be tested at a concentration of 80 % or less as some dilution is always produced by adding the test organisms and interfering substance.This document applies to products that are used in the medical area including those that are covered by the EEC/93/42 Directive on Medical Devices.This document applies to areas and situations where disinfection is medic
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- 发布
- 2005-04-23
- 实施
- 2005-04-23
The standard specifies test methods and requirements for the mycobacterial activity of chemical disinfectants and antiseptics that are used in human medicine. The project is also applicable to disinfectants for instruments.
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1); Germa
- ICS
- 11.080.20
- CCS
- C12
- 发布
- 2005-04
- 实施
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- 发布
- 2005-02-12
- 实施
- 2005-02-12
This document specifies a test method and the minimum requirements for mycobactericidal (or tuberculocidal) activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water - or in the case of ready-to-use products - with water. Products can only be tested at a concentration of 80 % or less as some dilution is always produced by adding the test organisms and interfering substance. This document applies to products that are used in the medical area including those that are covered by the EEC/93/42 Directive on Medical Devices. This document applies to areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example: in hospitals, in community medical facilities and in dental institutions; in clinics of schools, of kindergartens and of nursing homes; and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patients. NOTE 1 The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used. NOTE 2 This method corresponds to a phase 2, step 1 test (see Annex E).
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- C12
- 发布
- 2005-02-09
- 实施
- 2005-02-09
This document specifies a test method and the minimum requirements for mycobactericidal (or tuberculocidal) activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water - or in the case of ready-to-use products - with water. Products can only be tested at a concentration of 80 % or less as some dilution is always produced by adding the test organisms and interfering substance.This document applies to products that are used in the medical area including those that are covered by the EEC/93/42 Directive on Medical Devices.This document applies to areas and situations where disinfection is medic
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of mycobactericidal activity of chemical disinfectants in the medical area including instrument disinfectants - Test methods and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- 发布
- 2005-01-01
- 实施
Chemical disinfectants and antiseptics - Quantitative surface test for the evaluation of bacterial activity of chemical disinfectants and antiseptics used in veterinary field on non-porous surfaces without mechanical action - Test method and requirements
- ICS
- 11.080.20
- CCS
- 发布
- 2004-10-29
- 实施
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- 发布
- 2004-07-15
- 实施
- 2004-07-15
This European Standard specifies a test method and the minimum requirements for bactericidal activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water - or in the case of ready-to-use products - with water. Products can only be tested at a concentration of 80 % or less as some dilution is always produced by adding the test organisms and interfering substance. This European Standard applies to products that are used in the medical area for disinfecting instruments by immersion - even if they are not covered by the EEC/93/42 Directive on Medical Devices. This European Standard applies to areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example: — in hospitals, in community medical facilities and in dental institutions; — in clinics of schools, of kindergartens and of nursing homes; and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patients. NOTE 1 The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used. NOTE 2 This method corresponds to a phase 2 step 1 test (see annex E).
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (Phase 2/Step 1)
- ICS
- 11.080.20
- CCS
- C12
- 发布
- 2003-12-22
- 实施
- 2003-12-22
This European Standard specifies a test method and the minimum requirements for fungicidal or yeasticidal activity of chemical disinfectant products that form a homogeneous, physically stable preparation when diluted with hard water or - in the case of ready-to-use products - with water. Products can only be tested at a concentration of 80% or less as some dilution is always produced by adding the test organisms and interfering substance. This European Standard applies to products that are used in the medical area for disinfecting instruments by immersion - even if they are not covered by the EEC/93/42 Directive on Medical Devices. This European Standard applies to areas and situations where disinfection is medically indicated. Such indications occur in patient care, for example : — in hospitals, in community medical facilities and in dental institutions ; — in clinics of schools, of kindergartens and of nursing homes ; and may occur in the workplace and in the home. It may also include services such as laundries and kitchens supplying products directly for the patients. NOTE 1 The method described is intended to determine the activity of commercial formulations or active substances under the conditions in which they are used. NOTE 2 This method corresponds to a phase 2 step 1 test (see annex E).
Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal activity of chemical disinfectants for instruments used in the medical area - Test method and requirements (phase 2, step 1)
- ICS
- 11.080.20
- CCS
- C05
- 发布
- 2003-12-15
- 实施
- 2003-12-15
This standard describes chlorination materials, procedures, and requirements for disinfection of new treatment facilities and existing water treatment facilities temporarily taken out of service for cleaning, inspection, maintenance, painting, repair,
Disinfection of Water Treatment Plants
- ICS
- 11.080.20
- CCS
- X04
- 发布
- 2003-06-01
- 实施
