11.180.10 运动用设备及其配合性 标准查询与下载

ASTM F3392-20 外骨骼磨损、护理和维护说明的标准实施规程

1.1 This practice describes the required minimum information to be conveyed by the manufacturers to buyers or end users for the wearing, care, and maintenance of exoskeletons. 1.1.1 This practice does not cover specific instructions for how to select and when to use exoskeletons or design requirements. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Exoskeleton Wearing, Care, and Maintenance Instructions

ASTM F3358-20 外骨骼标签和信息的标准实施规程

1.1 This practice sets forth labeling and instruction guidelines for manufacturers of exoskeletons. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Labeling and Information for Exoskeletons

KS P 1997-2019 电动轮椅和滑板车锂离子电池系统的试验方法和安全要求

Electrically powered wheelchair and scooters — Test method and safety requirements for lithium-ion battery systems

KS P ISO 7176-13-2019 轮椅 - 第13部分:测试表面摩擦系数的测定

Wheelchairs — Part 13: Determination of coefficient of friction of test surfaces

KS P ISO 7176-19-2019 轮椅 - 第19部分:轮式移动装置用作机动车辆的座椅

Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles

KS P ISO 7176-19:2019 轮椅 - 第19部分:轮式移动装置用作机动车辆的座椅

Wheelchairs — Part 19: Wheeled mobility devices for use as seats in motor vehicles

KS P ISO 7176-13:2019 轮椅 - 第13部分:测试表面摩擦系数的测定

Wheelchairs — Part 13: Determination of coefficient of friction of test surfaces

ASTM F3392-19 外骨骼磨损、护理和维护说明的标准实施规程

Standard Practice for Exoskeleton Wearing, Care, and Maintenance Instructions

KS P ISO 11199-2:2019 双臂操纵的行走辅助装置 - 要求和测试方法 - 第2部分:滚子

Walking aids manipulated by both arms — Requirements and test methods — Part 2: Rollators

KS P ISO 11199-3:2019 由双臂操纵的行走辅助装置 - 要求和测试方法 - 第3部分:步行桌

Walking aids manipulated by both arms — Requirements and test methods — Part 3: Walking tables

KS P ISO 11199-3-2019 由双臂操纵的行走辅助装置 - 要求和测试方法 - 第3部分:步行桌

Walking aids manipulated by both arms — Requirements and test methods — Part 3: Walking tables

KS P ISO 11199-1:2019 由双臂操纵的行走辅助装置 - 要求和测试方法 - 第1部分:步行框架

Walking aids manipulated by both arms — Requirements and test methods — Part 1: Walking frames

KS P ISO 11199-1-2019 由双臂操纵的行走辅助装置 - 要求和测试方法 - 第1部分:步行框架

Walking aids manipulated by both arms — Requirements and test methods — Part 1: Walking frames

KS P ISO 11199-2-2019 双臂操纵的行走辅助装置 - 要求和测试方法 - 第2部分:滚子

Walking aids manipulated by both arms — Requirements and test methods — Part 2: Rollators

JIS T 9265:2019 助行器具. 滚动器和步行台

Assistive products for walking -- Rollators and walking tables

BS ISO 19894:2019 步行手推车 要求及测试方法

What is ISO 19894- Requirements and test methods for walking trolleys about? ISO 19894 discusses walking trolleys. ISO 19894 is an international standard that provides requirements and test methods for walking trolleys. ISO 19894 specifies the requirements and test methods for the testing strength, torque, and durability of parts, and stability and running durability for walking trolleys. ISO 19894 also provides requirements relating to general safety, folding and adjusting mechanisms, lifting and carrying means, ergonomics, and information supplied by the manufacturer including marking and labeling. Under ISO 19894 the requirements and tests are based upon everyday usage of walking trolleys as assistive products for walking, for a maximum user mass as specified by the manufacturer. This includes walking trolleys specified for a user mass of no less than 35kg. Who is ISO 19894- Requirements and test methods for walking trolleys for? ISO 19894 on the requirements and test methods for walking trolleys is relevant to: Wa lking trolleys manufacturers and suppliers Walking trolleys developers and testing people Why should you use ISO 19894- Requirements and test methods for walking trolleys ? Some elderly or disabled persons need assistive products for walking. Walking trolleys are designed to improve stability and balance while the user is located outside the frame.  A walking trolley is substantially lighter and more compact than a roller while providing the necessary support to maintain the stability and balance of the user. ...

Walking trolleys. Requirements and test methods

ISO 19894:2019 手推车.要求和试验方法

This document specifies the requirements and test methods for the testing strength, torque, and durability of parts, and stability and running durability as a whole for walking trolleys. This document also provides requirements relating to general safety, folding and adjusting mechanisms, lifting and carrying means, ergonomics and information supplied by the manufacturer including marking and labelling. The requirements and tests are based upon every-day usage of walking trolleys as assistive products for walking, for a maximum user mass as specified by the manufacturer. This document includes walking trolleys specified for a user mass of no less than 35kg. Excluded are rollators specified in ISO 11199-2.

Walking trolleys — Requirements and test methods

BS ISO 7176-30:2018 轮椅 用于改变乘员姿势的轮椅 测试方法及要求

What is this standard about? This document specifies the test methods and requirements for determining the safety and performance of a manual and/or power wheelchair that incorporates technology to alter the posture of the wheelchair occupant, which are either electrically or manually operated by the occupant or assistant during normal wheelchair use. This can include recline, tilt, elevate and stand-up mechanisms or a combination of these. In order for a wheelchair to be able to recline, tilt, elevate and/or standup, the wheelchair requires additional mechanisms and mechanical structures to allow these features to operate. This document specifies the different functional and strength tests required to test these wheelchairs in critical configurations of their adjustable range. This document does not cover wheelchairs where the only operator adjustable body support system (OABSS) is adjustable limb or head postural support devices alone (e.g. elevating leg supports). This document does not include wheelchair and postural support device customization during initial or subsequent setup of a wheelchair for an individual occupant. It also does not reflect other factors that can influence wheelchair stability such as occupant movement, cushion thickness, and the addition of ancillary equipment (e.g. respiratory support items).

Wheelchairs - Wheelchairs for changing occupant posture. Test methods and requirements

ISO 7176-30:2018 轮椅 - 第30部分:姿势更换型轮椅

This document specifies the test methods and requirements for determining the safety and performance of a manual and/or power wheelchair that incorporates technology to alter the posture of the wheelchair occupant, which are either electrically or manually operated by the occupant or assistant during normal wheelchair use. This can include recline, tilt, elevate and stand-up mechanisms or a combination of these. In order for a wheelchair to be able to recline, tilt, elevate and/or stand- up, the wheelchair requires additional mechanisms and mechanical structures to allow these features to operate. This document specifies the different functional and strength tests required to test these wheelchairs in critical configurations of their adjustable range. This document does not cover wheelchairs where the only operator adjustable body support system (OABSS) is adjustable limb or head postural support devices alone (e.g. elevating leg supports). This document does not include wheelchair and postural support device customization during initial or subsequent setup of a wheelchair for an individual occupant. It also does not reflect other factors that can influence wheelchair stability such as occupant movement, cushion thickness, and the addition of ancillary equipment (e.g. respiratory support items).

Wheelchairs — Part 30: Wheelchairs for changing occupant posture — Test methods and requirements

ASTM F3358-18 外骨骼标签和信息的标准实施规程

Standard Practice for Labeling and Information for Exoskeletons