11.180.10 运动用设备及其配合性 标准查询与下载
共找到 711 条与 运动用设备及其配合性 相关的标准，共 48 页
Walking aids manipulated by one arm — Requirements and test methods —Part 4: Walking sticks with three or more legs
- ICS
- 11.180.10
- CCS
- 发布
- 2022-12-14
- 实施
Walking aids manipulated by one arm — Requirements and test methods —Part 4: Walking sticks with three or more legs
- ICS
- 11.180.10
- CCS
- 发布
- 2022-12-14
- 实施
Tips for assistive products for walking — Requirements and test methods — Part 2: Durability of tips for crutches
- ICS
- 11.180.10
- CCS
- 发布
- 2022-12-14
- 实施
1 Scope This document specifies requirements for static, impact, and repetitive load strengths for postural support devices ( PSDs ) with associated attachment hardware intended for use with an undefined wheelchair seating system. It specifies the test methods for determining whether the minimum performance requirements have been met to release a product into use. It also specifies requirements for disclosure of the test results. Not all tests apply to all PSDs . This document includes sets of tests for these particular types of PSDs listed in Table 1: Table 1 — Index of tests PSD Repetitive ...
Wheelchair seating. Determination of static, impact, and repetitive load strengths for postural support devices
- ICS
- 11.180.10
- CCS
- 发布
- 2022-10-31
- 实施
- 2022-10-31
1 Scope This document specifies requirements and test methods for lead-acid batteries and their chargers intended for use with electrically-powered wheelchairs and scooters. Requirements for chargers are applicable to those with a rated input voltage not greater than 250 V AC and a nominal output voltage not greater than 36 V.
Wheelchairs. Lead-acid batteries and chargers for powered wheelchairs. Requirements and test methods
- ICS
- 11.180.10
- CCS
- 发布
- 2022-10-31
- 实施
- 2022-10-31
本文件规定了单臂操作助行器的术语和定义、分类、型号和规格、要求、试验方法、检验规则、标签和说明书、包装、运输和贮存。 本文件适用于肘拐杖、腋拐、三脚或多脚手杖、带座手杖、单脚手杖。本文件规定的产品使用者应按GB/ 19545系列标准规定要求。
General technical specification for walking aids operated by one arm
- ICS
- 11.180.10
- CCS
- O8290
- 发布
- 2022-10-25
- 实施
- 2022-12-15
This document specifies requirements for static, impact, and repetitive load strengths for postural support devices (PSDs) with associated attachment hardware intended for use with an undefined wheelchair seating system. It specifies the test methods for determining whether the minimum performance requirements have been met to release a product into use. It also specifies requirements for disclosure of the test results. Not all tests apply to all PSDs. This document includes sets of tests for these particular types of PSDs listed in Table 1: Table1 —Indexoftests PSD Repetitive Static Impact Seat cushion supporting structure X X Back cushion supporting structure X X X Pelvic positioning X X Anterior trunk support X X Lateral support X Medial knee support X Head support X X Lower arm positioning devices a a Foot support b b NOTE 1 Seat Cushion Supporting Structure is the system upon which the seat cushion is mounted. NOTE 2 Back Cushion Supporting Structure is the system upon which the back support is mounted. a Repetitive and static tests are under development for non-integrated, lower arm positioning devices. Arm support static test protocols are defined in ISO 7176-8 for supports which are integrated within the wheelchair. b Static and impact foot support test protocols are defined in ISO 7176-8 for supports which are integrated within the wheelchair. This document is also applicable to other seating systems. The testmethods can be used to verifythe manufacturer’s claims thata productmeets the requirements of this document. This document does not apply to PSDs that are designed to fail under certain static, dynamic, or repetitive loads. This document does not apply to the strength of PSDs under crash conditions in a motor vehicle. 1 This document does not evaluate long-term useful life. NOTE 1 ISO 16840-4 provides crash test methods and requirements for wheelchair seating systems when used as part ofa wheelchair seat in a motor vehicle. NOTE 2 For user masses greater or less than those specified in this document, appropriate extrapolation of test apparatus dimensions, mounting point separation, forces, etc. can be carried out, and the test parameters noted in the test report. NOTE 3 Rigid surrogate test fixtures are utilized to provide a standardized test method, and consequently this document does not involve a test of a PSD on a particular wheelchair.
Wheelchair seating — Part 3: Determination of static, impact, and repetitive load strengths for postural support devices
- ICS
- 11.180.10
- CCS
- 发布
- 2022-10-07
- 实施
This document specifies requirements and test methods for lead-acid batteries and their chargers intended for use with electrically-powered wheelchairs and scooters. Requirements for chargers are applicable to those with a rated input voltage not greater than 250 V AC and a nominal output voltage not greater than 36 V.
Wheelchairs — Part 25: Lead-acid batteries and chargers for powered wheelchairs — Requirements and test methods
- ICS
- 11.180.10
- CCS
- 发布
- 2022-10-06
- 实施
Wheelchairs — Part 21: Requirements and test methods for electromagnetic compatibility of electrically powered wheelchairs and scooters, and battery chargers
- ICS
- 11.180.10
- CCS
- 发布
- 2022-10
- 实施
Robotics — Test methods for exoskeleton-type walking RACA robot
- ICS
- 11.180.10
- CCS
- 发布
- 2022-10
- 实施
Wheelchairs - Part 31. Lithium-based battery technology
- ICS
- 11.180.10
- CCS
- 发布
- 2022-07-13
- 实施
- 2022-07-13
1 Scope This document specifies a method for determining the dissipation characteristics of simulated sensible perspiration exposure on seat cushions of a wheelchair under test conditions that simulate body loading on support surfaces with flat and contoured profiles. The test method is applicable to a wide variety of seat cushion materials and constructions that are used across the world. The test method is intended to determine how the cushion handles a liquid load. It is not intended to determine how the cushion responds to a continuous release of liquid or vapour. This document also specifies apparatus to measure dissipation characteristics (of perspiration) of seat cushions and the approach to be employed in measuring these characteristics. This document is applicable to seat cushions for wheelchairs that include a cushion cover. NOTE The significance of the dissipation characteristics of the seat cushion can be greatly affected by the clothing worn, for example a moisture wicking cover might not help the skin condition of the patient sitting in a wet adult diaper.
Wheelchair seating. Determination of dissipation characteristics of sensible perspiration into seat cushions
- ICS
- 11.180.10
- CCS
- 发布
- 2022-05-31
- 实施
- 2022-05-31
1 Scope This document specifies strength requirements and test methods for wheelchair castor assemblies. The test methods include corrosion, abrasion and fatigue conditions. This document also specifies requirements for disclosure of test results. It is applicable to castor assemblies of or developed for use in occupant and to assistant-propelled manual wheelchairs and electrically powered wheelchairs. The test requirements are also applicable to wheelchair castor assemblies not necessarily associated or supplied with a wheelchair. Castor assemblies including those with anti-tip castor wheels that do not touch the ground during wheelchair travel are outside the scope of this document.
Wheelchairs - Test method for wheelchair castor assembly durability
- ICS
- 11.180.10
- CCS
- 发布
- 2022-05-31
- 实施
- 2022-05-31
ISO 7176-2:2017 specifies test methods for determining the dynamic stability of electrically powered wheelchairs. ISO 7176-2:2017 is applicable to electrically powered wheelchairs, including scooters, with a maximum nominal speed not exceeding 15 km/h, intended to carry one person. ISO 7176-2:2017 is not applicable to manual wheelchairs with add-on power kits used for, or to assist, propulsion.
Wheelchairs — Part 2: Determination of dynamic stability of electrically powered wheelchairs
- ICS
- 11.180.10
- CCS
- 发布
- 2022-05-12
- 实施
Wheelchair seating — Part 11: Determination of dissipation characteristics of sensible perspiration into seat cushions
- ICS
- 11.180.10
- CCS
- 发布
- 2022-05-12
- 实施
This document specifies test methods for determining the maximum speed of electrically powered wheelchairs, including scooters, intended to carry one person with a maximum nominal speed not exceeding 15 km/h (4,167 m/s) on a level surface.
Wheelchairs — Part 6: Determination of maximum speed of electrically powered wheelchairs
- ICS
- 11.180.10
- CCS
- 发布
- 2022-05-12
- 实施
Wheelchairs — Part 32: Test method for wheelchair castor assembly durability
- ICS
- 11.180.10
- CCS
- 发布
- 2022-05-06
- 实施
1 Scope This document specifies test methods, requirements and recommendations for wheelchairs intended for use as seats in motor vehicles related to design, performance, labelling, presale literature, user instructions and user warnings. This document is applicable to all manual and powered wheelchairs , including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward-facing seats in motor vehicles by children and adults with a body mass equal to or greater than 12 kg. This document is applicable to complete wheelchairs , including a frame or powerbase and seating system . It is also applicable to wheelchairs equipped with additional components designed to facilitate conformity with one or more of the requirements of this document.
Wheelchairs. Wheelchairs for use as seats in motor vehicles
- ICS
- 11.180.10
- CCS
- 发布
- 2022-04-30
- 实施
- 2022-04-30
This document specifies test methods, requirements and recommendations for wheelchairs intended for use as seats in motor vehicles related to design, performance, labelling, presale literature, user instructions and user warnings. This document is applicable to all manual and powered wheelchairs, including scooters, which, in addition to their primary function as wheeled mobility devices, are also likely to be used as forward- facing seats in motor vehicles by children and adults with a body mass equal to or greater than 12 kg. This document is applicable to complete wheelchairs, including a frame or powerbase and seating system. It is also applicable to wheelchairs equipped with additional components designed to facilitate conformity with one or more of the requirements of this document.
Wheelchairs — Part 19: Wheelchairs for use as seats in motor vehicles
- ICS
- 11.180.10
- CCS
- 发布
- 2022-04-05
- 实施
What is ISO 7176-14 - Electrically powered wheelchairs and scooters test methods about? ISO 7176-14 is an international organization for standardization that specifies requirements and associated test methods for the power, and control systems of electrically powered wheelchairs and scooters. ISO 7176-14 sets safety and performance requirements that apply during normal use and some conditions of abuse and failure. ISO 7176-14 also specifies methods of measurement of the forces necessary to operate controls and sets limits on the forces needed for some operations.
Wheelchairs. Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods
- ICS
- 11.180.10
- CCS
- 发布
- 2022-03-31
- 实施
- 2022-03-31
