11.180.10 运动用设备及其配合性 标准查询与下载

DS/ISO 16840-13:2021 轮椅座椅 第13部分：坐垫横向稳定性能的测定

Wheelchair seating – Part 13: Determination of the lateral stability property of a seat cushion

DS/EN ISO 11199-1:2021 双臂行走辅助器具《要求和试验方法》第1部分：助行架（ISO 11199-1:2021）

Assistive products for walking manipulated by both arms – Requirements and test methods – Part 1: Walking frames (ISO 11199-1:2021)

DS/ISO 11199-1:2021 双臂行走辅助器具《要求和试验方法》第1部分：助行架

Assistive products for walking manipulated by both arms – Requirements and test methods – Part 1: Walking frames

DS/ISO 16840-10:2021 轮椅座椅 第10部分：姿势支撑装置的耐点火性 要求和测试方法

Wheelchair seating – Part 10: Resistance to ignition of postural support devices – Requirements and test method

ASTM F3519-21 建立外骨骼分析报告结构的标准指南

1.1?This guide provides a structure for exoskeleton manufacturers to document their analysis. Furthermore, this guide should be used in conjunction with Practice F3474, Guide F3518, Standard Guide for The Application of Ergonomics to Prevent Injury During Exoskeleton Use2 and ot

Standard Guide for Establishing a Reporting Structure for Exoskeleton Analysis

ISO 16840-13:2021 轮椅座椅第13部分:座垫横向稳定性的测定

This document specifies apparatus, test methods, and disclosure requirements for determination of lateral stability properties of wheelchair seat cushions by measuring the response from the cushion to a shift in the centre of mass of the load on the cushion. It provides a method of determining changes in a particular physical and mechanical property of the cushion. It does not provide information specific to cushion performance for a particular individual user. It does not provide information related to anterior-posterior stability, nor to stability contributions from cushion edges. NOTE 1 Test conditions simulate a symmetric anatomy. NOTE 2 Loads are intended to represent those seen under the pelvis of a 40th to 60th percentile wheelchair user. This document is applicable to cushions used in situations other than a wheelchair.

Wheelchair seating — Part 13: Determination of the lateral stability property of a seat cushion

ASTM F3518-21 建立外骨骼功能人类工效学参数和试验量度的定量测量的标准指南

1.1 This guide provides quantitative measures for assessing one or more specific ergonomic parameters with respect to exoskeletons. Furthermore, this guide should be used in conjunction with Practice F3474, Guide F3519, and Standard Guide for The Application of Ergonomics to Prevent Injury During Exoskeleton Use2 . 1.2 This guide provides quantitative measures for the design, use, and construction of exoskeletons within the domains of industry, military, medical, first responders, and recreational. 1.2.1 Quantitative measures are a type of data that can be put into a numerical value. This type of measure allows statistical analysis to be performed on the data to yield an objective result. 1.3 Units—The values stated in SI units are to be regarded as the standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Quantitative Measures for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics

BS ISO 16840-10:2021 轮椅 非集成式座和靠背垫的抗点燃性 要求和试验方法

Wheelchair seating. Resistance to ignition of postural support devices. Requirements and test method

BS EN ISO 11199-1:2021 用双臂操纵行走的辅助产品 要求和测试方法 步行架

Assistive products for walking manipulated by both arms. Requirements and test methods. Walking frames

EN ISO 11199-1:2021 双臂操作的助步器.要求和试验方法.第1部分:步行支架

Assistive products for walking manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:2021)

ISO 16840-10:2021 轮椅. 非集成式座和靠背垫的抗点燃性. 第10部分: 要求和试验方法

This document specifies requirements and test methods to assess the resistance to ignition by smouldering cigarette equivalent of integrated or non-integrated components of a wheelchair intended to protect tissue integrity and/or provide postural support. The electronic ignition source is also a simulation of other potential sources of environmental ignition hazards. The tests measure only the resistance to ignition of the items tested, and not the ignitability of the complete wheelchair. It gives an indication, but cannot guarantee, the ignition behaviour of the assembled devices of a complete wheelchair. This document does not apply to resistance to ignition of structural parts of a wheelchair. This document does not cover changes in resistance to ignition as a result of regular washing or use of the postural support devices. This document does not apply to the control of risks created by electrical and electronic components. This document allows for the separate testing of components of a wheelchair that are normally used in the horizontal plane (e.g. a seat cushion) from those normally used in the vertical plane (e.g. a back support). This document describes testing an assembly of the composite of materials as used in the component. The results of the tests in this document do not give any indication of the resistance to ignition of any of the separate individual materials of the test sample. NOTE The intent of this document is primarily to address components that interface with the human body, such as cushions for positioning, or whose described purpose is that of protecting skin tissue against pressure, shear, and maceration related damage, as well as textile, foam, and plastic-based postural support devices.

Wheelchair seating - Part 10: Resistance to ignition of postural support devices - Requirements and test method

ISO 11199-1:2021 双臂步行辅助产品.要求和试验方法.第1部分:步行架

This document specifies requirements and test methods for walking frames used as assistive products for walking, manipulated by both arms, without accessories, unless specified in the particular test procedure. This document also gives requirements relating to safety, ergonomics, performance and information supplied by the manufacturer, including marking and labelling. The requirements and tests are based on everyday use of walking frames as assistive products for walking for a maximum user mass as specified by the manufacturer. This document includes walking frames specified for a user mass of no less than 35 kg.

Assistive products for walking manipulated by both arms — Requirements and test methods — Part 1: Walking frames

T/CARD 011.3-2021 辅具产品采购规范 第3部分：轮式助行器

本文件规定了轮式助行器采购过程中的产品分类及适用群体、产品要求、供应和服务的具体要求。

Procurement Specifications for Assistive Devices Part 3: Wheeled Walkers

T/CARD 011.1-2021 辅具产品采购规范 第1部分：盲杖

本文件规定了盲杖采购过程中的产品分类及适用群体、产品要求、供应和服务的具体要求。

Procurement Specifications for Assistive Devices Part 1: Blind Cane

T/CARD 011.4-2021 辅具产品采购规范 第4部分：手动轮椅车

本文件规定了手动轮椅车采购过程中产品分类与适用群体、产品要求、供应和服务的具体要求。

Procurement Specifications for Assistive Devices Part 4: Manual Wheelchairs

FprEN 81-41-2021 电梯建造和安装的安全规则 人员和货物运输专用电梯 第41部分：供行动不便人士使用的垂直升降平台

Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons with impaired mobility

DS/ISO 10542-1:2021 残疾人或残障人士的技术系统和辅助设备 轮椅系紧和乘员约束系统 第1部分：所有系统的要求和测试方法 修正案 1：附录 K、L、M

Technical systems and aids for disabled or handicapped persons – Wheelchair tiedown and occupantrestraint systems – Part 1: Requirements and test methods for all systems -AMENDMENT 1: Annexes K, L, M

ISO 10542-1:2012/Amd 1:2021 残疾人或残障人士的技术系统和辅助设备 轮椅束缚和乘员约束系统 第1部分：所有系统的要求和测试方法 修改件1：附件 K、L

Technical systems and aids for disabled or handicapped persons — Wheelchair tiedown and occupant-restraint systems — Part 1: Requirements and test methods for all systems — Amendment 1: Annexes K, L,

ASTM F2665-21 全踝置换假体标准规范

1.1?This specification covers total ankle replacement (TAR) prostheses used to provide functioning articulation by employing talar and tibial components that allow for a minimum of 15�� of dorsiflexion and 15 to 25�� (1)2 of plantar flexion, as determined by non-clinical testing

Standard Specification for Total Ankle Replacement Prosthesis

CWA 17664-2021 下肢可穿戴设备 不平坦地形行走性能测试方法

Lower-limb wearable devices - Performance test method for walking on uneven terrain