13.040.30 工作场所空气 标准查询与下载

ISO/DIS 21438-2 工作场所大气《离子色谱法测定无机酸》第2部分：挥发性酸，氢氟酸（盐酸、氢溴酸和硝酸）除外

Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)

ISO/CD 6868:2023 工作场所空气 采用 X 射线粉末衍射法定量测定散装材料中的石英和方英石

Workplace Air — Quantitative determination of quartz and cristobalite in bulk materials by X-ray powder diffraction methods

T/QGCML 713-2023 新型覆膜纳米滤袋

本文件规定了新型覆膜纳米滤袋的术语和定义、要求、检验方法、检验规则、标志、包装、运输和贮存。 本文件适用于新型覆膜纳米滤袋的生产和检验。

New film coated nano filter bag

T/QGCML 695-2023 定型机尾气处理设备

本标准规定了定型机尾气处理设备的术语和定义、技术要求、检验方法、检验规则、标志、包装、运输和贮存。      本标准适用于定型机尾气处理设备的生产及检验。

Styling machine tail gas treatment equipment

BS EN ISO 14644-4:2022 洁净室和相关受控环境 设计、建造和启动

What is BS EN ISO 14644-4 –   Cleanroom design and construction   about? The fourth in a multipart international standard,   BS EN ISO 14644-4   describes best practice requirements during the design, construction, commissioning, start up, and hand over of a cleanroom or cleaner device installation from the supplier to the customer and end user. Who is BS EN ISO 14644-4 -   Cleanroom design and construction   for? Users, specifiers, designers, purchasers, suppliers, builders and performance verifiers of cleanroom installations. What does BS EN ISO 14644-4 -   Cleanroom design and construction   cover? BS EN ISO 14644-4   specifies the process for creating a cleanroom from requirements through to its design, construction and start-up. It applies to new and refurbished or modified cleanroom installations. The primary cleanliness consideration in   BS EN ISO 14644-4   is airborne particle concentration. Detailed checklists are provided for the various stages including requirements, design, construction and start-up, which include important performance parameters to be considered.

Cleanrooms and associated controlled environments - Design, construction and start-up

BS ISO 8518:2022 工作场所空气 颗粒铅和铅化合物的测定 火焰和电热原子吸收光谱法

1   Scope This document specifies flame and electrothermal atomic absorption spectrometric methods for the determination of the time-weighted average mass concentration of particulate lead and lead compounds in workplace air. These methods are typically applicable to personal sampling of the inhalable fraction of airborne particles, as defined in ISO 7708, and to static (area) sampling. It can be applied to other health-related fractions as required. The sample dissolution procedure specifies hot plate or microwave assisted digestion, or ultrasonic extraction (see 11.2). The use of an alternative, more vigorous dissolution procedure is necessary when it is desired to extract lead from compounds present in the test atmosphere that are insoluble using the dissolution procedures described herein (see Clause 5). The flame atomic absorption method is applicable to the determination of masses of approximately 1 µg to 200 µg of lead per sample, without dilution [ 1 ] . The electrothermal atomic absorption method is applicable to the determination of masses of approximately 0,01 µg to 0,5 µg of lead per sample, without dilution [ 1 ] . The ultrasonic extraction procedure has been validated for the determination of masses of approximately 20 µg to 100 µg of lead per sample, for laboratory-generated lead fume air filter samples [ 2 ] . The concentration range for lead in air for which this procedure is applicable is determined in part by the sampling procedure selected by the user (see 10.1).

Workplace air. Determination of particulate lead and lead compounds. Flame and electrothermal atomic absorption spectrometric methods

KS I ISO 30011-2022 工作场所空气中空气颗粒物中金属和类金属的电感耦合等离子体质谱测定

Workplace air Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry

KS I ISO 9486-2022 工作场所空气中气态氯化烃的测定炭管/溶剂解吸/气相色谱法

Workplace air Determination of vaporous chlorinated hydrocarbons Charcoal tube/solvent desorption/ gas chromatographic method

KS I ISO 15767-2022 工作场所大气收集的气溶胶称重的不确定度控制和表征

Workplace atmospheres Controlling and characterizing uncertainty in weighing collected aerosols

KS I ISO 21438-3-2022 工作场所大气无机酸的离子色谱测定第3部分:氢氟酸和颗粒氟化物

Workplace atmospheres Determination of inorganic acids by ion chromatography Part 3: Hydrofluoric acid and particulate fluorides

KS I ISO 17735-2022 工作场所大气1-（9-蒽甲基）哌嗪（MAP）试剂和液相色谱法测定空气中异氰酸酯总基团

Workplace atmospheres Determination of total isocyanate groups in air using 1 --(9 anthracenylmethyl)piperazine(MAP) reagent and liquid chromatography

KS I ISO 9487-2022 车间空气中挥发性芳烃的测定炭管/溶剂解吸/气相色谱法

Workplace air Determination of vaporous aromatic hydrocarbons Charcoal tube/solvent desorption/ gas chromatographic method

KS I ISO 24095-2022 工作场所空气可吸入结晶二氧化硅测量指南

Workplace air Guidance for the measurement of respirable crystalline silica

KS I ISO 16740-2022 工作场所空气中大气颗粒物中六价铬的测定二苯碳酰肼离子色谱分光光度法

Workplace air Determination of hexavalent chromium in airborne particulate matter Method by ion chromatography and spectrophotometric measurement using diphenyl carbazide

BS EN ISO 23861:2022 工作场所空气 化学剂以空气颗粒和蒸气的混合物形式存在 使用采样器评估测量程序的要求

1   Scope This document specifies requirements for the evaluation of measuring procedures using samplers for the determination of a chemical agent present in the workplace atmosphere as a mixture of airborne particles and vapour. The procedures given in this document provide results only for the sum of airborne particles and vapour. The concentration is calculated in terms of mass per unit volume. NOTE The physical behaviour of a mixture of airborne particles and vapour is described in Annex A. Examples of substances which can be present in multiple phases are toluene diisocyanate, diethanolamine, ethyleneglycol and tributylphosphate. This document can also be applied to complex mixtures, such as metal working fluids or bitumen fumes. This document is applicable to samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.

Workplace air. Chemical agent present as a mixture of airborne particles and vapour. Requirements for evaluation of measuring procedures using samplers

22/30440721 DC BS ISO 21438-2 职场氛围 离子色谱法测定无机酸 第2部分：挥发性酸 氢氟酸除外（盐酸、氢溴酸和硝酸）

BS ISO 21438-2. Workplace atmospheres. Determination of inorganic acids by ion chromatography - Part 2. Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid)

T/GAIA 014-2022 工作场所空气中醇类化合物的测定 热脱附/气相色谱-质谱法

本文件规定了采用热脱附/气相色谱-质谱法测定工作场所空气中醇类化合物的方法。 本文件适用于工作场所空气中蒸气态醇类化合物异丙醇、叔丁醇、正丙醇、仲丁醇、异丁醇、2-甲氧基乙醇、正丁醇、氯乙醇、2-乙氧基乙醇和异戊醇浓度的检测。

Determination of alcohols in workplace air—Thermal desorption gas chromatography mass spectrometry method

ISO/DIS 6323-1 工作场所空气《电热原子吸收光谱法测定砷及砷化合物》第1部分：ET-AAS法测定除胂以外的砷及砷化合物

Workplace air — Determination of arsenic and arsenic compounds by electrothermal atomic absorption spectrometry — Part 1: Arsenic and arsenic compounds, except arsine by ET-AAS

BS EN ISO 13137:2022 职场氛围 用于化学和生物制剂个人采样的泵 要求及测试方法

1   Scope This document specifies performance requirements for battery powered pumps used for personal sampling of chemical and biological agents in workplace air. It also specifies test methods in order to determine the performance characteristics of such pumps under prescribed laboratory conditions. This document is applicable to battery powered pumps having a nominal volumetric flow rate above 10 ml ⋅ min −1 , as used with combinations of sampler and collection substrate for sampling of gases, vapours, dusts, fumes, mists and fibres. This document is primarily intended for flow-controlled pumps.

Workplace atmospheres. Pumps for personal sampling of chemical and biological agents. Requirements and test methods

EN ISO 23861:2022 工作场所空气.气载颗粒和蒸汽混合物中的化学试剂.使用取样器评估测量程序的要求

This document specifies requirements for the evaluation of measuring procedures using samplers for the determination of a chemical agent present in the workplace atmosphere as a mixture of airborne particles and vapour. The procedures given in this document provide results only for the sum of airborne particles and vapour. The concentration is calculated in terms of mass per unit volume. NOTE The physical behaviour of a mixture of airborne particles and vapour is described in Annex A. Examples of substances which can be present in multiple phases are toluene diisocyanate, diethanolamine, ethyleneglycol and tributylphosphate. This document can also be applied to complex mixtures, such as metal working fluids or bitumen fumes. This document is applicable to samplers and measuring procedures using these samplers in which sampling and analysis are carried out in separate stages.

Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022)