13.060.10 天然水资源 标准查询与下载

GB/T 13580.10-1992 大气降水中氟化物的测定 新氟试剂光度法

本标准规定了测定大气降水中氟化物的氟试剂光度法。 本标准适用于大气降水样品中氟化物的测定。 本标准最低检出浓度为0.05mg/L，测定范围为0.06～1.5mg/L。

Determination of fluoride in the wet precipitation.Fluor reagent spectrophotometry

GB 11729-1989 水源水中百菌清卫生标准

本标准规定了水源水中百菌清的最高容许浓度。 本标准适用于生产和使用百菌清周围的生活饮用水源水，以及大面积喷洒百菌清森林地区的生活饮用水源水。

Hygienic standard for chlorothalonile in drinking water sources

GSO ASTM E2727:2024 雨水质量评估标准规范

1.1 This practice provides a methodology for assessing rainwater quality. 1.1.1 This practice identifies a set of research and reporting requirements that will permit the intended user to assess the rainwater quality of a catchment area of a particular site. 1.1.2 This practice characterizes rainwater quality in general and identifies site conditions that may affect rainwater quality. Where site conditions affecting rainwater exist, additional assessment techniques may be required. 1.1.3 Objectives guiding the development of this practice are (1) to synthesize and put in writing good commercial and customary practice for rainwater quality assessment; (2) to facilitate high quality, standardized water stewardship protocols; and (3) to clarify a standard of due diligence that is practical and reasonable. 1.2 This practice does not establish design requirements for rainwater harvesting systems. However, it may provide information in support of decisions relative to design and implementation of rainwater harvesting projects. 1.3 This practice does not identify use(s) of rainwater, commercial or otherwise. However, it may provide information in support of decisions relative to evaluation of property conditions and development options. 1.4 This practice offers a set of instructions for performing one or more specific operations. This document cannot replace education or experience and should be used in conjunction with professional judgment. 1.4.1 Water laws vary among governing jurisdictions. It is the responsibility of the user of this practice to determine regulatory requirements applicable to rainwater quality assessment and potential use(s). 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are mathematical conversions to inch-pound units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Assessment of Rainwater Quality

GSO ASTM D7285:2024 微滤和超滤系统记录保存的标准指南

1.1 This guide covers procedures for well-defined recordkeeping of microfiltration (MF) and ultrafiltration (UF) systems. 1.2 This guide includes a start-up report, recordkeeping of MF/UF operating data, recordkeeping of pretreatment operating data, and a maintenance log. 1.3 This guide is applicable to waters including surface water, ground water and some wastewater (secondary effluent) but is not applicable to membrane bioreactors or process streams. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems

T/EERT 045-2024 河流水生态系统修复技术规范

本文件规定了河流水生态系统修复的术语与定义、总体原则、总体要求、河道生境多样性保护修复、河道生态流量保障和水动力调控、河道基底修复、河道水质原位强化净化、河流生物多样性恢复、面源污染滞留拦截净化等技术内容和要求，以及水文化传承与营造、工程成效评估、工程运行维护等要求。

Technical specifications for river ecosystem restoration

ASTM D6724/D6724M-16(2024)e1 直推式地下水监测井安装的标准指南

Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

ASTM D6725/D6725M-16(2024)e1 松散含水层中预包装屏蔽监测井的直接推动安装的标准实施规程

Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

ASTM F1084-08(2024) 溢油回收设备油/水混合物采样标准指南

Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment

ASTM D8006-24 勘探和生产（E&；P）作业区住宅和商业供水井取样和分析的标准指南

Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations

ASTM D6564/D6564M-17(2024) 地下水样品现场过滤的标准指南

Standard Guide for Field Filtration of Groundwater Samples

ASTM E3373-24 水力分离器和沉降装置冲刷的标准试验方法

1.1  This test method covers the testing of hydrodynamic stormwater separators and underground settling devices as it relates to the measurement of the resuspension and washout (scour) of previously captured sediment. 1.2  Units tested shall be of a size commonly manufactured and available for purchase. In order to facilitate testing it is permissible to substitute alternate materials for the housing and structural components of the test units if operational components are at full size, with identical dimensions, configurations and materials specified for commercial use. Scale models are not permissible. 1.3  The test method provides a means of evaluating retention of suspended solids previously captured with a manufactured treatment device (MTD) that is placed as an offline or online treatment device along storm drain pipe lines. It provides criteria in which to evaluate whether the MTD is appropriate for installation in offline or online conditions. 1.4  This test method provides the means for evaluating the scour potential for both offline and online conditions. 1.5  Units— The values stated in inch-pound units are to be regarded as standard, except for methods to establish and report sediment concentration and particle size. It is convention to exclusively describe sediment concentration in mg/L and particle size in mm or μm, both of which are SI units. The SI units given in parentheses are mathematical conversions, which are provided for information purposes only and are not considered standard. Reporting of test results in units other than inch-pound units shall not be regarded as non-conformance with this test method. 1.6  This test method may be subject to specific requirements set by a Quality Assurance Project Plan, a specific verification protocol, or Authority Having Jurisdiction (AHJ). It is advised to review one or all of the above to ensure compliance 1.7  Acceptance of test results attained according to this specification may be subject to specific requirements set by a Quality Assurance Project Plan, a specific verification protocol, or Authority Having Jurisdiction (AHJ). It is advised to review one or all of the above to ensure compliance. 1.8  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.9  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Scour of Hydrodynamic Separators and Settling Devices

DB32/T 4634-2024 涵洞工程技术管理规范

Technical management specifications for culvert engineering

DB32/T 4637-2024 幸福河湖评价规范

Evaluation Standards for Happy Rivers and Lakes

ASTM D5978/D5978M-16(2024) 地下水监测井的维护和修复标准指南

Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

DB45/T 2822-2023 地表水水质自动监测站站房和采水建设规范

适用于广西壮族自治区行政区域内地表水水质自动监测站站房和采水建设。

Specifications for construction of automatic surface water quality monitoring stations and water extraction

ASTM F1210-23 淡水和其他内陆环境、湖泊和大型水体中使用溢油分散剂的生态考虑标准指南

Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

ASTM F1231-23 淡水和其他内陆环境、河流和溪流中使用溢油分散剂的生态考虑标准指南

Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks

ASTM F1209-23 淡水和其他内陆环境、池塘和洼地中使用溢油分散剂的生态考虑标准指南

Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs

DB3213/T 1062-2023 计划用水户节约用水规范化管理导则

Guidelines for standardized management of water conservation for planned water users

ASTM D6517-18(2023) 地下水样品现场保存的标准指南

Standard Guide for Field Preservation of Ground Water Samples