13.280 辐射防护 标准查询与下载

T/ACEF 136-2024 核医学钇-90微球辐射防护与安全要求

本文件适用于医疗机构核医学钇-90微球使用过程中的辐射防护与安全管理。 本文件不适用于非医疗机构中开展钇-90微球的生产、运输、科研等相关实践活动。

Requirements on radiation protection and safety for yttrium-90 microspheres in nuclear medicine

T/ACEF 135-2024 移动式医用CT设备辐射防护与安全要求

本文件规定了移动式医用CT设备诊断过程应用中的辐射防护与安全要求。

Requirements on radiation protection and safety for mobile medical computed tomography equipment

T/WSJD 52-2024 生活饮用水中总α、总β放射性测量实验室及质量控制通用要求

本文件规定了生活饮用水中总α、总β放射性测量实验室的布局、基本实验设施配置与设置、水样采集、处理和测量的技术及其相关要求。 本文件适用于生活饮用水中总α、总β放射性的测量。

General requirements for laboratories and quality control of total alpha and total beta radioactivity measurement in drinking water

T/WSJD 55-2024 医疗机构放射卫生监督指南

本文件规定了医疗机构放射卫生监督的方法和流程、内容及监督结果处理。 本文件适用于各级卫生监督机构对医疗机构开展的放射诊疗活动的卫生监督工作。

Guidelines for Radiation Health Supervision in Medical Institutions

T/WSJD 54-2024 儿童 CT 扫描诊断参考水平建立指南

本文件规定了临床开展儿童CT扫描建立诊断参考水平的方法指南

Guidelines for establishing diagnostic reference levels for CT scans in children

T/WSJD 53-2024 氡测量 CR-39 径迹蚀刻法

本文件规定了采用CR-39径迹蚀刻法开展空气中氡的平均浓度测量的方法与质量保证措施。 本文件适用于CR-39径迹蚀刻法开展建筑物、矿山和地下空间等场所空气中平均氡浓度的测量。

Radon Measurement CR-39 Track Etch Method

24/30489140 DC BS EN IEC 62533 辐射防护仪器 用于放射性物质光子检测的高灵敏度手持式仪器

BS EN IEC 62533 Radiation protection instrumentation – Highly sensitive hand-held instruments for photon detection of radioactive material

T/CASEI 031-2024 γ射线检测辐射应急管理办法和应急指南

本文件适用于涉及γ射线检测的无损检测机构。

γ-Radiation detection radiation emergency management measuers and emergency guidelines

T/CSRP 02-2024 放射性表面污染钢铁喷丸去污技术要求

本文件规定了放射性表面污染钢铁喷丸去污的一般要求以及工艺、作业、废物管理、辐射防护和工业安全等要求。 本文件适用于放射性表面污染钢铁的喷丸去污。

Technical requirements for shot peening decontamination of steel surfaces contaminated with radionuclides

T/CSRP 01-2024 铀矿冶设施退役源项调查技术规范

本文件规定了铀矿冶设施退役源项调查的原则、方法、内容、监测点布设、样品采集与处理、测量分析方法和仪器选择、数据处理和报告编写、质量保证等。 本文件适用于铀矿冶设施退役的源项调查。铀矿地质勘察设施或伴生放射性矿的退役源项调查可参照使用。

Technical Specification for Investigation of Source Terms for Decommissioning of Uranium Mine and Mill Facilities

GSO IEC 61322:2024 辐射防护仪器 安装环境剂量当量率计、警告和监测组件 用于能量从热到 20 MeV 的中子

IEC 61322:2020 applies to installed dose equivalent rate meters, warning assemblies and monitors, as defined below. It covers equipment intended to measure neutron radiation in dose equivalent rates in the energy region between thermal and 20 MeV for the purposes of radiation protection. Assemblies of this type are commonly defined as area radiation monitors. They are normally employed to determine continuously the radiological situation in working areas in which the radiation field may change with time, for example, nuclear power plants, particle accelerators, high-activity laboratories, fuel reprocessing plants, etc., and provide alarms when the radiation field goes outside predetermined limits. The assemblies considered in this document comprise at least: a detector assembly, which may, for example, consist of a detector probe (for thermal neutrons such as BF3 proportional counter, 3He proportional counter, 6LiI(Tl) scintillation detector, etc.) and a moderating and absorbing medium surrounding the detector; a processing assembly, which may be fitted into a centralized panel, which, in the case of warning assemblies and monitors, provides signal outputs and contacts capable of activating alarm or other trip circuits; alternatively, the case when all the processing electronics are placed within the detection unit (so called "smart blocks") may be considered. In this case the functions of the processing assembly will be composed of only the indication, the providing signal outputs and contacts. This second edition cancels and replaces the first edition published in 1994 This edition includes the following significant technical changes with respect to the previous edition: this document has been updated to take account of the requirements of the relevant IEC standards, IEC 60532:2010 and IEC 61005:2014.

Radiation protection instrumentation - Installed ambient dose equivalent rate meters, warning and monitoring assemblies for neutrons with energies from thermal to 20 MeV

ASTM 52303-24 修改件5 信息技术 视听对象编码 第5部分：参考软件 错误恢复简单可扩展配置文件的参考软件扩展

1.1  This document provides guidance in determining absorbed-dose distributions (mapping) in products, materials or substances irradiated in gamma, X-ray (bremsstrahlung) and electron beam facilities. Note 1:  For irradiation of food and the radiation sterilization of health care products, specific ISO and ISO/ASTM standards containing dose mapping requirements exist. See ISO/ASTM Practices 51608 , 51649 , 51702 and 51818 and ISO 11137-1. Regarding the radiation sterilization of health care products, in those areas covered by ISO 11137-1, that standard takes precedence. 1.2  This guide is one of a set of standards that provides recommendations for properly implementing dosimetry in radiation processing. It is intended to be read in conjunction with ISO/ASTM 52628 . 1.3  Methods of analyzing the dose map data are described. Examples are provided of statistical methods that may be used to analyze dose map data. 1.4  Dose mapping for bulk flow processing and fluid streams is not discussed. 1.5  Dosimetry is an element of a total quality management system for an irradiation facility. Other controls besides dosimetry may be required for specific applications such as medical device sterilization and food preservation. 1.6  This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7  This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities

BS EN ISO 21909-1:2023 被动中子剂量测定系统 个人剂量测定的性能和测试要求

Passive neutron dosimetry systems - Performance and test requirements for personal dosimetry

KS A 4052-2023 放射性污染防护橡胶手套

Protective rubber gloves for radioactive contamination

T/SCIIA 5-2023 核医学智慧辐射防护管理技术规范

本文件规定了核医学智慧辐射防护管理平台功能要求、硬件参数方面的总体要求。 

Technical Specification for Intelligent Radiation Protection Management in Nuclear Medicine

BS EN IEC 62387:2022+A11:2022 辐射防护仪器仪表 带有集成无源探测器的剂量测定系统，用于个人、工作场所和环境的光子和 β 辐射监测

Radiation protection instrumentation. Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation

23/30446350 DC BS EN ISO 20553 辐射防护 监测职业上面临放射性物质内部污染风险的工人

BS EN ISO 20553 Radiation protection. Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material

T/CSRP 01-2023 基于同位素中子源的中子衰减比测试规范

本文件推荐了板状或近似板状材料的中子衰减比测试方法。 本文件适用于在252Cf等同位素中子源直接产生的快中子或经过慢化产生的慢中子（0.01eV~0.4eV）辐射场中测试材料的中子衰减比。相关同位素中子源中子能量特征参考GB/T 14055.1-2008附录A。

Neutron attenuation ratio test specifications based on isotope neutron sources

T/HAEPI 08-2023 核技术利用单位辐射事故应急预案编制指南

    规定了核技术利用单位辐射事故应急预案的基本框架、主要内容和格式要求。

Guidelines for Preparing Radiation Accident Emergency Plans for Nuclear Technology Utilizing Units

T/BSRS 103-2023 低水平放射性固体废物容器——玄武岩复合材料箱

为满足低水平放射性固体废物包装、运输和处置的要求，促进核行业低水平放射性固体废物容器的标准化、系列化，特制定本文件。本标准将适用于玄武岩复合材料箱在固体废物领域的应用，有利于放射性废物的安全管理。 本文件确定了玄武岩复合材料箱的规格、型号、技术要求、试验方法和检验要求等。

Container for low level radioactive solid waste--Basalt composite box