13.340.40 防护手套 标准查询与下载

AQ 6103-2007 焊工防护手套

本标准规定了在手工金属焊接、气割和类似作业中使用的防护手套的要求和试验方法。 本标准适用于在焊接和相关的作业过程中对手部和腕部起保护作用的焊工防护手套。 本标准不适用于特殊焊接作业使用的防护手套。

Protective gloves for welders

AQ 6101-2007 橡胶耐油手套

本标准规定了橡胶耐油手套（以下简称“手套”）的技术要求、试验方法及标志标识。 本标准适用于由橡胶制成的工业用途的耐矿物油、植物油以及脂肪族的各种溶剂油用手套。

Oil resistant rubber gloves

AQ 6104-2007 防X线手套

本标准规定了防X线手套（以下简称“手套”）的技术要求和试验方法。 本标准适用于橡胶手套，其他材料的具有防X线性能的手套可参照本标准有关条文执行。

X-ray protective gloves

DS/EN 511:2006 防寒手套

This European Standard specifies the requirements and test methods for gloves which protect against convective and conductive cold down to –50 °C. This cold can be linked to the climatic conditions or anindustrial activity. The specific values of the different performance levels are decided by the special requirements for each class of risk or the special areas of application. Product tests may only give performance levels and not levels of protection.

Protective gloves against cold

LST EN 511-2006 防寒手套

Protective gloves against cold

DIN EN 511:2006 防冻手套

This European Standard specifies the requirements and test methods for gloves which protect against convective and conductive cold down to -50 ? This cold can be linked to the climatic conditions or an industrial activity. The specific values of the different performance levels are decided by the special requirements for each class of risk or the special areas of application. Product tests may only give performance levels and not levels of protection.

Protective gloves against cold; English version of DIN EN 511:2006-07

BS EN 511:2006 御寒手套

This European Standard specifies the requirements and test methods for gloves which protect against convective and conductive cold down to –50 °C. This cold can be linked to the climatic conditions or an industrial activity. The specific values of the different performance levels are decided by the special requirements for each class of risk or the special areas of application. Product tests may only give performance levels and not levels of protection.

Protective gloves against cold

NF S75-506*NF EN 511:2006 防冻手套

Protective gloves against cold.

DIN EN 374-3 Corrigendum 1:2006 耐化学腐蚀和微生物的防护手套. 第3部分: 耐化学品渗透性的测定; 英文版本DIN EN 374-3: 2003-12勘误表1

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals Corrigendum 1 to English version of DIN EN 374-3:2003-12

DIN EN 374-3 Berichtigung 1:2006 耐化学腐蚀和微生物的防护手套.第3部分:测定化学药品穿透阻力

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals; German version EN 374-3:2003, Corrigendum to DIN EN 374-3:2003-12; German version EN 374-3:2003/AC:2006

DS/EN 374-3/AC:2006 防化学品和微生物的防护手套 第3部分：耐化学品渗透性的测定

This standard specifies the determination of the resistance of protective glove materials to permeation by potentially hazardous non-gaseous chemicals under the condition of continuous contact. It is emphasised that the test does not represent conditions likely to be found in service, and the use of test data should be restricted to comparing materials chiefly on a relative basis in broad categories of breakthrough times.

Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals

EN 511:2006 御寒手套

This European Standard specifies the requirements and test methods for gloves which protect against convective and conductive cold down to –50 °C. This cold can be linked to the climatic conditions or an industrial activity. The specific values of the different performance levels are decided by the special requirements for each class of risk or the special areas of application. Product tests may only give performance levels and not levels of protection.

Protective gloves against cold

JIS T 8116:2005 化学防护手套

この規格は，酸，アルカリ，有機薬品，その他の気体及び液体又は粒子状の有害化学物質(以下，化学物質という。)を取り扱う作業に従事するときに着用し，化学物質の透過及び/又は浸透の防止を目的として使用する手袋(以下，化学防護手袋という。)について規定する。

Protective gloves for use against chemicals

NF S75-509/A1*NF EN 12477/A1:2005 焊工用防护手套

Protective gloves for welders.

DIN EN 12477:2005 焊工用防护手套

The project gives additional requirements for electrical vertical resistance and an additional requirement to the design with respect to electrical conductivity.

Protective gloves for welders; German version EN 12477:2001 + A1:2005

LST EN 12477-2002/A1-2005 焊工防护手套

Protective gloves for welders

DS/EN 12477/A1:2005 焊工防护手套

Add after the first sentence of the third paragraph:The glove's material provides minimum electrical resistance up to 100V (AC or DC) for arc welding.Add after the last sentence of the third paragraph the following warning notice:WARNING: It is not meant to bring any protection in case of defective or wrong use of the welding equipment. It does not qualify the glove for protection against electrical shock where protective gloves designed according to EN 60903 shall be used.

Protective gloves for welders

LST EN 14328-2005 防护服 防止动力刀割伤的手套和护臂 要求和测试方法

Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods

DS/EN 14328:2005 防护服 防止动力刀割伤的手套和护臂 要求和测试方法

This document specifies the requirements for the design, cut resistance, ergonomic characteristics, innocuousness, fixings, construction materials, marking and instructions for use, for chain mail gloves and armguards providing protection against powered knives. Appropriate test methods are also specified.

Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods

BS EN 14328:2005 防护服.防动力刀具切削的防护手套和护臂装置.要求和试验方法

This document specifies the requirements for the design, cut resistance, ergonomic characteristics, innocuousness, fixings, construction materials, marking and instructions for use, for chain mail gloves and armguards providing protection against powered knives. Appropriate test methods are also specified.

Protective clothing - Gloves and armguards protecting against cuts by powered knives - Requirements and test methods