17.160 振动、冲击和振动测量 标准查询与下载

KS B ISO 13373-3-2023 机械状态监测和诊断振动状态监测第3部分:振动诊断指南

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 3: Guidelines for vibration diagnosis

KS B ISO 16063-11-2023 振动和冲击传感器的校准方法第11部分:激光干涉测量法的一次振动校准

Methods for the calibration of vibration and shock transducers — Part 11: Primary vibration calibration by laser interferometry

KS B ISO 8042-2023 冲击和振动测量——地震传感器的特性规定

Shock and vibration measurements — Characteristics to be specified for seismic pick-ups

KS B ISO 13379-2-2023 机器状态监测和诊断数据解释和诊断技术第2部分:数据驱动应用

Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications

KS B ISO 10813-1-2023 振动发生机械选择指南第1部分:环境试验设备

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing

T/CI 225-2023 高频底座测力天平的动力校准技术规范

本文件规定了风洞试验中的高频测力天平所用的六轴力/力矩传感器的规格、技术要求、动力校准的方法、校准质量判定等内容。 本文件适用于高频测力天平实验中测量信号的动力校准，解决由系统动力放大引起的信号畸变问题。

Technical specifications for dynamic calibration of high-frequency force balance

23/30453591 DC ISO 20816-21 机械振动 机器振动的测量和评估 第21部分：水平轴风力发电机

ISO 20816-21 Mechanical vibration. Measurement and evaluation of machine vibration. - Part 21. Horizontal axis wind turbines

BS ISO 10813-1:2023 振动发生器 选型指南-环境试验设备

Vibration generating machines. Guidance for selection - Equipment for environmental testing

ISO/PRF 10813-1:2023 振动发生机选型指南第1部分：环境试验设备

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing

ISO 10813-1:2023 振动发生机选型指南第1部分：环境试验设备

Vibration generating machines — Guidance for selection — Part 1: Equipment for environmental testing

ISO 16063-31:2009/WD Amd 1 振动和冲击传感器的校准方法第31部分：横向振动灵敏度测试第1次修订

Methods for the calibration of vibration and shock transducers — Part 31: Testing of transverse vibration sensitivity — Amendment 1

T/QGCML 989-2023 有减震降噪功能的振动盘

本文件规定了有减震降噪功能的振动盘的术语和定义、构成及原理、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于有减震降噪功能的振动盘的生产及检验。

Vibration plate with shock and noise reduction function

ISO/DIS 4548-15:2023 内燃机全流式润滑油滤清器试验方法 第15部分：复合滤清器壳体振动疲劳试验

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings

GSO ISO 13373-5:2023 机器状态监测和诊断 振动状态监测 第5部分：风扇和鼓风机的诊断技术

This document sets out the specific procedures to be considered when carrying out vibration diagnostics of various types of fans and blowers. This document is intended to be used by condition monitoring practitioners, engineers and technicians and provides a practical, step-by-step, vibration-based approach to fault diagnosis. In addition, it gives a number of examples for a range of machine and component types and their associated fault symptoms. The approach given in this document is based on established good practice, put together by experienced users, although it is acknowledged that other approaches can exist. Recommended actions for a particular diagnosis depend on individual circumstances, the degree of confidence in the fault diagnosis (e.g. has the same diagnosis been made correctly before for this machine), the experience of the practitioner, the fault type and severity as well as on safety and commercial considerations. It is neither possible nor the aim of this document to recommend actions for all circumstances.

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 5: Diagnostic techniques for fans and blowers

23/30466826 DC BS ISO 10813-1 振动发生器 选择指南 第 1 部分：环境测试设备

BS ISO 10813-1. Vibration generating machines. Guidance for selection - Part 1. Equipment for environmental testing

KS B ISO 10816-8-2022 机械振动.通过测量非旋转部件对机器振动的评定.第8部分:往复式压缩机系统

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 8: Reciprocating compressor systems

KS B ISO 18437-5-2022 机械振动和冲击.粘弹性材料动态机械特性的表征.第5部分:基于测量和有限元分析之间比较的泊松比

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 5: Poisson ratio based on comparison between measurements and finite element an

KS B ISO 18437-1-2022 机械振动和冲击.粘弹性材料动态机械特性的表征.第1部分:原理和指南

Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines

KS B ISO 13373-2-2022 机器的状态监测和诊断.振动状态监测.第2部分:振动数据的处理、分析和表示

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data

KS B ISO 10816-7-2022 机械振动.通过对非旋转部件的测量对机器振动的评估.第7部分:工业用旋转动力泵 包括对旋转轴的测量

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts