17.180.30 光学测量仪器 标准查询与下载

VDI/VDE 5575 Blatt 10-2015 射线光学系统 衍射光栅

The standard describes diffraction gratings for spectral decomposition of X-rays. The grating equation, the dispersion and the angular magnification are introduced in detail as physical principles. The different types of diffraction gratings are described. Methods for the determination of structural properties like the groove density are explained.

X-ray optical systems - Diffraction gratings

ASTM E388-04(2015) 荧光光谱仪的波长准确度和光谱带宽的标准测试方法

1.1 This test method covers the testing of the spectral bandwidth and wavelength accuracy of fluorescence spectrometers that use a monochromator for emission wavelength selection and photomultiplier tube detection. This test method can be applied to instruments that use multi-element detectors, such as diode arrays, but results must be interpreted carefully. This test method uses atomic lines between 250 nm and 1000 nm. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers

GOST R 8.889-2015 确保测量可追溯性的国家系统. 扫描分光荧光计. 验证程序

State system for ensuring the traceability of measurements. Scanning spectrofluorimeters. Verification procedure

GOST R 8.890-2015 确保测量可追溯性的国家系统. 作为地球观测的基于空间的信息和测量系统的一部分的光电仪器. 用于确保辐射测量均匀性的组织和条理规定

State system for ensuring the traceability of measurements. Optoelectronic instruments as a part of space-based informational and measuring systems for Earth Observation. Organizational and methodical provisions for ensuring the uniformity of radiometric

JIS B 7912-1:2014 光学和光学仪器. 测地与勘测仪器的野外测试程序. 第1部分: 理论

Optics and optical instruments.Field procedures for testing geodetic and surveying instruments.Part 1: Theory

ISO 17123-1:2014 光学和光学仪器.测地与勘测仪器的现场测试规程.第1部分:理论

Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 1: Theory

ISO 12858-1:2014 光学和光学仪器 大地测量仪器辅助装置 第1部分:殷钢水平支柱

Optics and optical instruments - Ancillary devices for geodetic instruments - Part 1: Invar levelling staffs

JB/T 11996-2014 机动车尾气遥测设备 通用技术要求

本标准规定了机动车尾气遥测设备的分类、结构、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。本标准适用于应用光谱吸收原理,远距离感应检测行驶中的机动车尾气排放浓度的设备(以下简称遥测仪)。

General technical requirements of remote sensing equipment for motor vehicle exhaust

GSO OIML R14:2014 (ICUMSA) 根据国际血糖仪等级列出的偏光血糖仪

Polarimetric saccharimeters are instruments which measure the relationship between the optical rotation caused by an aqueous solution of a sample and that caused by a pure sucrose solution of prescribed concentration, using the same polarized light. This Recommendation applies to polarimetric saccharimeters that are graduated in sugar degrees (!Z) in accordance with the ICUMSA International Sugar Scale (see Annex A) and that belong to the visual or photo-electric type, including: a) saccharimeters with a rotating polarizer or analyser of which the angle of rotation can be measured and which are illuminated by a monochromatic light source of known wavelength which must be between 540 nm and 633 nm; b) saccharimeters with quartz wedge compensation and illuminated either by a monochromatic light source of known wavelength which must be between 540 nm and 633 nm, or by the light of an incandescent lamp filtered in such a way that the distribution of the spectral energy from the lamp, arising from the degree of spectral filtration by the filter and from the spectral sensitivity of the detector (eye or photo-multiplier), permits the use of radiation of effective wavelength 587 nm; c) saccharimeters which operate according to a principle of measurement other than those given in (a) and (b).

Polarimetric saccharimeters graduated in accordance with the ICUMSA International Sugar Scale

GSO ISO 16331-1:2013 光学和光学仪器测试扫描和建立仪器的实验室程序 第1部分：便携式激光测距仪的性能

This part of ISO 16331 specifies procedures for checking compliance with performance specifications of handheld laser distance meters.

Optics and optical instruments -- Laboratory procedures for testing surveying and construction instruments -- Part 1: Performance of handheld laser distance meters

DB23/T 1525-2013 反射式荧光共焦显微镜技术基本要求

Basic Requirements for Reflective Fluorescence Confocal Microscopy

DB23/T 1531-2013 移相差动共焦显微镜技术要求

Technical Requirements for Phase Shift Differential Confocal Microscopy

DB23/T 1529-2013 连续光谱共焦显微镜技术基本要求

Basic Requirements for Continuous Spectrum Confocal Microscopy

ISO 12858-2:1999/Amd 1:2013 光学和光学仪器.大地测量仪器辅助装置.第2部分:三角架.修改件1

Optics and optical instruments.Ancillary devices for geodetic instruments.Part 2: Tripods; Amendment 1

DB34/T 1814-2013 便携式车身反光标识检测仪

本标准规定了由集成光学系统、嵌入式软件、显示屏、电源、机壳等组成的便携式车身反光标识检 测仪（以下简称检测仪）的术语和定义、分类和型号、要求、试验方法、检验规则以及标志、包装、运 输、贮存等。 本标准适用于检测仪的设计、制造和检测。

Portable Body Reflective Mark Detector

ASTM E932-89(2013) 描述和测量分散红外光谱仪性能的标准实践

1.1 This practice covers the necessary information to qualify dispersive infrared instruments for specific analytical applications, and especially for methods developed by ASTM International. 1.2 This practice is not to be used as a rigorous test of performance of instrumentation. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers

ASTM E685-93(2013) 用于液相色谱的固定波长光度检测器的标准实践

1.1 This practice is intended to serve as a guide for the testing of the performance of a photometric detector (PD) used as the detection component of a liquid-chromatographic (LC) system operating at one or more fixed wavelengths in the range 210 to 800 nm. Measurements are made at 254 nm, if possible, and are optional at other wavelengths. 1.2 This practice is intended to describe the performance of the detector both independently of the chromatographic system (static conditions) and with flowing solvent (dynamic conditions). 1.3 For general liquid chromatographic procedures, consult Refs (1-9).2 1.4 For general information concerning the principles, construction, operation, and evaluation of liquidchromatography detectors, see Refs (10 and 11) in addition to the sections devoted to detectors in Refs (1-7). 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography

VDI/VDE 5575 Blatt 8-2013 射线光学系统 单色器晶体

Basic principles and applications of monochrator crystals for spectral filtering and focussing of X-rays are described in this guideline. A survey over different types of monochromator crystals is given. Composition, mode of opteration as well as the range of applications will be explained. Different geometries of focusing monochromator crystals are specified.

X-ray optical systems - Monochromator crystals

GOST R 8.848-2013 确保测量一致性的国家系统. 三原色比色计. 通道参数的测定方法

State system for ensuring the uniformity of measurements. Tristimulus colorimeters. Method for the determination of channels parameters

DB34/T 1751-2012 便携式车身反光标识检测仪

本标准规定了由集成光学系统、嵌入式软件、显示屏、电源、机壳等组成的便携式车身反光标识检测仪（以下简称检测仪）的术语和定义、分类和型号、要求、试验方法、检验规则以及标志、包装、运输、贮存等。 本标准适用于检测仪的设计、制造和检测。

Portable Body Reflective Mark Detector