21.060.30 垫圈、锁紧件 标准查询与下载
共找到 1055 条与 垫圈、锁紧件 相关的标准，共 71 页
Plain washers－Normal series－Product grade A
- ICS
- 21.060.30
- CCS
- 发布
- 2005-12-20
- 实施
이 규격은 경도 구분 200 HV와 300 HV이고, 호칭 치수(호칭 나사 지름)가 1.6
Plain washers－Normal series－Product grade A
- ICS
- 21.060.30
- CCS
- J13
- 发布
- 2005-12-20
- 实施
- 2005-12-20
이 규격은 경도급 100 HV이고 호칭 치수(호칭 나사 지름)가 1.6 mm에서 64 mm
Plain washers－Normal series－Product grade C
- ICS
- 21.060.30
- CCS
- J13
- 发布
- 2005-12-20
- 实施
- 2005-12-20
This standard specifies requirements and methods of test for conical spring washers which are intended for use with bolt/nut assemblies as dealt with in the following standards: -- DIN 6796 Conical spring washers for bolt/nut assemblies DIN 6908, Conical spring washers for screw and washer assemblies It is recommended that this standard also be applied for conical spring washers for bolt/nut assemblies which have not been standardized. Conical spring washers made from materials other than spring steel are not covered by this standard. NOTE Conical spring washers serve to counteract the loss in inherent tension caused by setting and creep of a bolt/nut assembly provided that -- they are sufficiently resilient to increase the overall resilience of the assembly; -- their inherent spring force can compensate for any loss in tension so that the clamping force required to ensure the reliability of the assembly is maintained. There may be relative movement between bolt and nut if the friction between the clamped components is overcome by transverse forces. If this does occur, loosening of the assembly cannot usually be prevented by spring washers. Thus, when using these components, it should be checked whether the spring washers may usefully be employed as the elements maintaining the clamping force.
Fasteners - Technical specifications - Part 26: Conical spring washers for bolted connections
- ICS
- 21.060.30
- CCS
- J13
- 发布
- 2005-12
- 实施
This document specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive. NOTE Attention is drawn to the importance of ensuring that the washers are correctly used if satisfactory results are to be obtained. For recommendations concerning proper application, reference to ENV 1090-1 is made.
High-strength structural bolting assemblies for preloading - Plain chamfered washers
- ICS
- 21.060.30
- CCS
- J13
- 发布
- 2005-11-07
- 实施
- 2005-11-07
This document specifies, together with EN 14399-1, hardened and tempered plain washers intended for assembly with large series hexagon high-strength structural bolts and nuts with threads from M12 to M36 inclusive. Washers according to this standard can be applied under the nut only. NOTE Attention is drawn to the importance of ensuring that the washers are correctly used if satisfactory results are to be obtained. For recommendations concerning proper application, reference to ENV 1090-1 is made.
High-strength structural bolting assemblies for preloading - Plain washers
- ICS
- 21.060.30
- CCS
- J13
- 发布
- 2005-10-07
- 实施
- 2005-10-07
High-strength structural bolting assemblies for preloading - Part 6 : plain chamfered waschers.
- ICS
- 21.060.30
- CCS
- J13
- 发布
- 2005-08-01
- 实施
- 2005-08-05
High-strength structural bolting assemblies for preloading - Part 5 : plain washers.
- ICS
- 21.060.30
- CCS
- J13
- 发布
- 2005-08-01
- 实施
- 2005-08-05
All dimensions are in inches.
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, DRILLED, .190-32 NS
- ICS
- 21.060.30
- CCS
- V20
- 发布
- 2005-07-22
- 实施
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
WASHER, SPLIT, PART OF SERIES C CONNECTORS
- ICS
- 21.060.30
- CCS
- V20
- 发布
- 2005-06-28
- 实施
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
- ICS
- 21.060.30
- CCS
- 发布
- 2005-05-31
- 实施
- 2005-05-31
High-strength structural bolting assemblies for preloading - Part 5: Plain washers
- ICS
- 21.060.30
- CCS
- 发布
- 2005-05-31
- 实施
- 2005-05-31
This standard specifies, together with EN 14399-1, hardened and tempered plain washers intended for assembly with large series hexagon high-strenght structural bolts and nuts with threads from M12 to M36 inclusive. Washers according to this standard can be applied under the nut only.
High-strength structural bolting assemblies for preloading - Part 5: Plain washers
- ICS
- 21.060.30
- CCS
- 发布
- 2005-05-27
- 实施
- 2005-05-27
This standard specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive.
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers
- ICS
- 21.060.30
- CCS
- 发布
- 2005-05-27
- 实施
- 2005-05-27
This document specifies, together with EN 14399-1, hardened and tempered plain washers with chamfer intended for assembly with large series hexagon high-strength structural bolts and nuts with thread sizes from M12 to M36 inclusive. NOTE Attention is drawn toThe importance of ensuring thatThe washers are correctly used if satisfactory results are to be obtained. For recommendations concerning proper application, reference to ENV 1090-1 is made.
High-strength structural bolting assemblies for preloading - Part 6: Plain chamfered washers Including Corrigendum January 2006
- ICS
- 21.060.30
- CCS
- 发布
- 2005-03-01
- 实施
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
WASHER, FLAT (BURR)
- ICS
- 21.060.30
- CCS
- V20
- 发布
- 2005-01-28
- 实施
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
BOLT-MACHINE, DRILLED 12 POINT HEAD, STEEL, .4375-20 UNF-3A
- ICS
- 21.060.30
- CCS
- V20
- 发布
- 2005-01-28
- 实施
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
WASHER, FLAT (SQUARE)
- ICS
- 21.060.30
- CCS
- V20
- 发布
- 2005-01-28
- 实施
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil
NUT, HEXAGON, SEMIFINISHED, HEAVY, UNC-2B AND 8N-2B, HIGH TEMPERATURE - TO 1000 DEG. F
- ICS
- 21.060.30
- CCS
- V20
- 发布
- 2005-01-28
- 实施
The activities above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using the ASSIST Online database at http://assist.daps.dla.mil.
NUT, PLAIN, SQUARE
- ICS
- 21.060.30
- CCS
- V20
- 发布
- 2005-01-28
- 实施
