23.020.20 车载槽罐和容器 标准查询与下载

DS/EN 14512:2006 危险货物运输罐 液体化学品运输罐设备 带枢轴螺栓的铰链人孔盖和颈环

This European Standard specifies the requirements for hinged manhole covers and neckrings with pivoting bolts for use on transportable tanks with a minimum working pressure greater than 50 kPa for the transport of dangerous goods by road and rail.

Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals - Hinged manhole covers and neckrings with pivoting bolts

DS/EN 13807/AC:2005 移动式气瓶 电瓶车 设计、制造、鉴定和检测

This standard specifies the requirements for the design, manufacture, identification and testing of a battery vehicle. This standard is applicable to battery vehicles containing compressed gas, liquefied gas and mixtures thereof.

Transportable gas cylinders – Battery vehicles – Design, manufacture, identification and testing

DS/EN 13807:2004 移动式气瓶 电池车 设计、制造、鉴定和试验

This standard specifies the requirements for the design, manufacture, identification and testing of a battery vehicle. This standard is applicable to battery vehicles containing compressed gas, liquefied gas and mixtures thereof.

Transportable gas cylinders - Battery vehicles - Design, manufacture, identification and testing

VDI 2383-2003 带排放阀的液体容器 标称尺寸 500 至 1000 升

Die Container werden für den Transport, die Lagerung sowie teilweise als Arbeitsbeh?lter eingesetzt. Durch die standardisierten Auslaufarmaturen und die dadurch gegebene M?glichkeit des dosierten Ablassens der Produkte lassen sich die Container direkt an Produktionseinrichtungen (Ringleitungen) anschlie?en.*www.vdi.de/2383

Liquid container with drain valve - Nominal size 500 to 1000 l

VDI 2363-2003 不带排放阀的液体容器 标称尺寸 250 l

Das Dokument beschreibt die Ladungssicherung, die Sicherheit beim Befüllen und Entleeren. Die Beh?lter werden für den Transport, die Lagerung sowie als Arbeitsbeh?lter eingesetzt.*www.vdi.de/2363

Liquid container without drain valve - Nominal size 250 l

DS/EN 13385:2002 可运输气瓶 用于永久性和液化气体（不包括乙炔）的电池车辆 充装时的检查

This European Standard specifes the requirements for inspection before, during and after the time of filling of battery vehicles.

Transportable gas cylinders - Battery vehicles for permanent and liquefied gases (excluding acetylene) - Inspection at time of filling

CNS 7248-1999 液化石油气汽车运输槽体

本标准适用于公路上装载液化石油气高压槽之出厂检验及其定期检验等有关规定。1.1 本标准所指之槽体系指用 16mm 以下钢板以电弧熔接制成之槽体而其槽体外面不施予保温隔热施者而言。1.2 与法令关系者 : 槽体及其附属件之应符合主管机关之规定。1.3 释义 : 本标准所用名词之解

Liquefied petroleum gastank on truck ortrailer

BS 3441:1995 牛奶和液态牛奶制品运输箱规范

This British Standard specifies requirements for the design, materials and construction of the tanks of tankers intended for the transport of milk and liquid milk products. A method for the testing of pressure in tanks is given in annex A and guidance on the selection of materials of construction and welding consumables is given in annex B.

Specification for tanks for the transport of milk and liquid milk products

BS 7122:1989 液化气体道路运输用的焊接钢槽车规范

Material, design, construction and testing. Tanks with manually and/or automatically welded circumferential and longitudinal seams. May also be used for portable tanks with capacity greater than 1000 L.

Specification for welded steel tanks for the road transport of liquefiable gases

NF E86-257:1989 立式可运输的容器.一般特性

Vertical transportable storage tanks. General characteristics.

CNS 3590-1988 水硬性水泥之正常稠度检验法

本标准规定测定水硬性水泥正常稠度之试验方法。备考 1.：本标准可能涉及到危险性之材料、操作和设备，此标准之要旨并不在详述所有有关使用时之安全问题，使用此标准者应负责于使用前咨询并建立适当的安全及卫生之操作方法，且在使用前确定出使用界限。2.：本试验方法之意义

Normal consistency test method for hydraulic cement

ANSI MH5.1.3M-1982 液体和气体储存器的要求

Requirements for tank containers for liquids and gases