23.020.40 低温容器 标准查询与下载
共找到 336 条与 低温容器 相关的标准，共 23 页
This document specifies requirements for the design, fabrication, inspection and testing of large transportable vacuum-insulated cryogenic vessels of more than 450 l volume, which are permanently (fixed tanks) or not permanently (demountable tanks and portable tanks) attached to a means of transport, for one or more modes of transport. This document applies to large transportable vacuum-insulated cryogenic vessels for fluids specified in 3.1 and does not apply to vessels designed for toxic fluids. This document does not include the general vehicle requirements, e.g. running gear, brakes, lighting, etc. NOTE 1 This document does not cover specific requirements for refillable liquid-hydrogen tanks that are primarily dedicated as fuel tanks in vehicles. For fuel tanks used in land vehicles, see ISO 13985. NOTE 2 This document does not cover specific requirements for refillable liquid hydrogen and LNG tanks that are primarily dedicated as fuel tanks in vehicles. For fuel tanks used in vehicles, see ISO 13985.
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 1: Design, fabrication, inspection and testing
- ICS
- 23.020.40
- CCS
- 发布
- 2019-06-19
- 实施
1 Scope This document specifies requirements for the design, fabrication, type test and initial inspection and test of transportable vacuum-insulated cryogenic pressure vessels of not more than 1 000 l volume. This document applies to transportable vacuum-insulated cryogenic vessels for fluids as specified in 3.1 and Table 1 and does not apply to such vessels designed for toxic fluids. NOTE 1 This document does not cover specific requirements for refillable liquid hydrogen and LNG tanks that are primarily dedicated as fuel tanks in vehicles. For fuel tanks used in land and marine vehicles, see ISO 13985. NOTE 2 Specific requirements for open top dewards are not covered by this document.
Cryogenic vessels. Transportable vacuum insulated vessels of not more than 1 000 litres volume - Design, fabrication, inspection and tests
- ICS
- 23.020.40
- CCS
- 发布
- 2019-05-31
- 实施
- 2019-05-31
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 1: Design, fabrication, inspection and tests — Amendment 1
- ICS
- 23.020.40
- CCS
- 发布
- 2019-05-16
- 实施
Cryogenic vessels — Pilot operated pressure relief devices — Part 4: Pressure-relief accessories for cryogenic service — Amendment 1
- ICS
- 23.020.40
- CCS
- 发布
- 2019-05-06
- 实施
1、规定了采用应变强化技术制造移动式真空绝热深冷压力容器内容器用钢材料的牌号、力学性能要求和复验要求，并给出了内容器非金属支撑材料的技术要求。 2、明确了应变强化内容器的设计载荷、许用应力、设计压力、开孔补强计算、强化压力的要求，并给出了应变强化内容器结构设计的关键技术要求，重点介绍了夹层支撑结构设计的典型型式和技术要求。 3、规定了应变强化容器制造过程中，材料制备、加工成形、焊接和无损检测方面的特殊要求，重点就焊接工艺评定的具特殊要求进行了规定。 4、以资料性附录的形式，给出了应变强化内容器制造过程中重要质量控制点、应变强化工艺验证性试验要求、试件预拉伸及试验规则等要求；用规范性附录形式，规定了应变强化处理的相关要求。
Transportable vacuum insulated cryogenic pressure vessels—Requirement of pressure strengthening for inner vessels
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2018-07-05
- 实施
- 2018-07-05
Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 2: Non-reclosable pressure-relief devices; Amendment 1
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2018-07-00
- 实施
Cryogenic vessels－Gas/materials compatibility
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels－Gas/materials compatibility
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels－Gas/materials compatibility
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels — Cleanliness for cryogenic service
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels — Cleanliness for cryogenic service
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels — Large transportable vacuum-insulated vessels — Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
Cryogenic vessels — Cleanliness for cryogenic service
- ICS
- 23.020.40
- CCS
- 发布
- 2018-06-25
- 实施
1 Scope This document specifies the toughness requirements of metallic materials for use at temperatures between −20 °C and −80 °C to ensure their suitability for cryogenic vessels. This document is applicable to fine-grain and low-alloyed steels with specified yield strength ≤460 N/mm 2 , aluminium and aluminium alloys, copper and copper alloys and austenitic stainless steels. NOTE For steel materials listed in EN 13445-2 or EN 13480-2 or for steel materials and weldings complying with the same fundamental safety requirements, the requirements for prevention of brittle fracture at low temperatures according to EN 13445-2:2014, Annex B, method 2, or EN 13480-2:2012, Annex B, method 2 can be applied.
Cryogenic vessels. Toughness requirements for materials at cryogenic temperature - Temperatures between -80 degrees C and -20 degrees C
- ICS
- 23.020.40
- CCS
- 发布
- 2018-04-30
- 实施
- 2018-04-30
This document specifies the toughness requirements of metallic materials for use at temperatures between −20 °C and −80 °C to ensure their suitability for cryogenic vessels. This document is applicable to fine-grain and low-alloyed steels with specified yield strength ≤460 N/mm2, aluminium and aluminium alloys, copper and copper alloys and austenitic stainless steels. NOTE For steel materials listed in EN 13445-2 or EN 13480-2 or for steel materials and weldings complying with the same fundamental safety requirements, the requirements for prevention of brittle fracture at low temperatures according to EN 13445-2:2014, Annex B, method 2, or EN 13480-2:2012, Annex B, method 2 can be applied.
Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 2: Temperatures between -80 degrees C and -20 degrees C
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2018-03-01
- 实施
Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1 000 litres volume - Part 1: Design, fabrication, inspection and tests
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2018-02-01
- 实施
1 Scope This document specifies gas/material compatibility requirements (such as chemical resistance) for cryogenic vessels, but it does not cover mechanical properties (e.g. for low-temperature applications). This document provides general guidance for compatibility with gases and detailed compatibility requirements for oxygen and oxygen-enriched atmospheres. This document also defines the testing methods for establishing oxygen compatibility of materials (metallic and non-metallic) to be used for cryogenic vessels and associated equipment. This document focuses on materials that are normally with or could be in contact with cryogenic fluids.
Cryogenic vessels. Gas/material compatibility
- ICS
- 23.020.40
- CCS
- 发布
- 2017-12-31
- 实施
- 2017-12-31
This document specifies gas/material compatibility requirements (such as chemical resistance) for cryogenic vessels, but it does not cover mechanical properties (e.g. for low-temperature applications). This document provides general guidance for compatibility with gases and detailed compatibility requirements for oxygen and oxygen-enriched atmospheres. This document also defines the testing methods for establishing oxygen compatibility of materials (metallic and non-metallic) to be used for cryogenic vessels and associated equipment. This document focuses on materials that are normally with or could be in contact with cryogenic fluids.
Cryogenic vessels - Gas/material compatibility
- ICS
- 23.020.40
- CCS
- 发布
- 2017-12-08
- 实施
