23.020.40 低温容器 标准查询与下载
共找到 335 条与 低温容器 相关的标准，共 23 页
Cryogenic vessels－Pumps for cryogenic service
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels－Static vacuum insulated vessels－Part 2：Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels－Pumps for cryogenic service
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels－Static vacuum insulated vessels－Part 2：Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels－Static vacuum insulated vessels－Part 2：Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels－Pumps for cryogenic service
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels－Toughness requirements for material at cryogenic temperature－Part 1：Temperatures below－80 ℃
- ICS
- 23.020.40
- CCS
- 发布
- 2017-09-29
- 实施
Cryogenic vessels. Cleanliness for cryogenic service
- ICS
- 23.020.40
- CCS
- 发布
- 2017-06-29
- 实施
- 2017-06-29
Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO 20421-2:2017); German version EN ISO 20421-2:2017
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2017-05
- 实施
This document specifies the minimum requirements for the cleanliness of all surfaces of cryogenic vessels and associated accessories that are in contact with the cryogenic fluid at any expected operating conditions. This document defines the acceptable level of surface and particle contamination to minimize the risk of malfunction of equipment and ensure safety against ignition when in contact with oxygen or oxidizing fluids (see ISO 10156).
Cryogenic vessels - Cleanliness for cryogenic service
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2017-04
- 实施
Cryogenic vessels. Large transportable vacuum-insulated vessels. Operational requirements
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2017-02-28
- 实施
- 2017-02-28
This document specifies operational requirements for large transportable vacuum-insulated cryogenic vessels. These operational requirements include putting into service, filling, withdrawal, transport within the location, storage, maintenance, periodic inspection and emergency procedures . For the transport of these vessels by public road, rail, waterway, sea and air, additional requirements can apply; these are defined in specific regulations .
Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2017-02-00
- 实施
Dieses Dokument legt die Betriebsanforderungen an große ortsbewegliche vakuumisolierte Kryo-Behälter fest. Diese Betriebsanforderungen umfassen Inbetriebnahme, Füllen, Entnahme, Transport innerhalb des Betriebsgeländes, Lagerung, Instandhaltung, wiederkehrende Inspektion sowie das Verhalten im Notfall. Für den Transport dieser Behälter auf öffentlichen Straßen, Schienen, Gewässern und auf dem Luftweg können zusätzliche Anforderungen gelten; diese sind in besonderen Verordnungen festgelegt.
Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements
- ICS
- 23.020.40
- CCS
- J74
- 发布
- 2017-02
- 实施
Cryogenic vessels - Toughness requirements for materials at cryogenic temperature - Part 1: Temperatures below -80 °C (ISO 21028-1:2016); German version EN ISO 21028-1:2016
- ICS
- 23.020.40
- CCS
- A82
- 发布
- 2017-01
- 实施
This part of ISO 21013 provides separate calculation methods for determining the required mass flow to be relieved for each of the following specified conditions. — Vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure. — Vacuum-insulated vessels with insulation system (outer jacket + insulating material) intact under normal vacuum; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure; pressure regulator of the pressure build-up system functioning at full potential. — Vacuum-insulated vessels with insulation system remaining in place but with loss of vacuum, or non-vacuum-insulated vessels with insulation system intact; outer jacket at ambient temperature; inner vessel at temperature of the contents at the relieving pressure; vacuum or non-vacuum-insulated vessels with insulation system remaining fully or partially in place, but with loss of vacuum in the case of vacuum-insulated vessels, and fire engulfment; inner vessel at temperature of the contents at the relieving pressure. — Vessels with insulation system totally lost and fire engulfment. Good engineering practice based on well-established theoretical physical science shall be adopted to determine the required mass flow where an appropriate calculation method is not provided for an applicable condition.
Cryogenic vessels -- Pressure-relief accessories for cryogenic service -- Part 3: Sizing and capacity determination
- ICS
- 23.020.40
- CCS
- 发布
- 2016-12-22
- 实施
This part of ISO 21028 specifies the toughness requirements of metallic materials for use at temperatures below − 80 °C to ensure their suitability for cryogenic vessels. It is not applicable to unalloyed steels and cast materials.
Cryogenic vessels -- Toughness requirements for materials at cryogenic temperature -- Part 1: Temperatures below -80 degrees C
- ICS
- 23.020.40
- CCS
- 发布
- 2016-12-22
- 实施
