23.020.40 低温容器 标准查询与下载

BS ISO 21014:2007 低温容器.低温绝热性能

ISO 21014:2006 defines practical methods for determining the heat-leak performance of cryogenic vessels. The methods include measurement on both open and closed systems. ISO 21014:2006 neither specifies the requirement levels for insulation performance nor when the defined methods should be applied. These requirements may be defined in design or operational standards/regulations.

Cryogenic vessels - Cryogenic insulation performance

DIN EN 14398-2/A1:2007 低温容器.大型可运输非真空绝缘容器.第2部分:设计、制造、检查和试验

Amendment of clause 4.3.2.1 and deletion of table 1 and the sentence above this table.

Cryogenic vessels - Large transportable non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing; German version EN 14398-2:2003/A1:2006 + AC:2006

DS/EN 14197-2/AC:2007 低温容器 静态非真空绝热容器 第2部分：设计、制造、检验和测试

This standard specifies requirements for the design, fabrication, inspection and testing of static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar.

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

DS/EN 1251-2/AC:2007 低温容器 容积不超过 1000 升的可运输真空绝热容器 第2部分：设计、制造、检验和测试

This European Standard is applicable to the design, fabrication, inspection and testing of transportable vacuum insulated cryogenic vessels of not more than 1000 litres volume and designed for a maximum allowable pressure greater than atmospheric.

Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing

DS/EN 13458-2/AC:2007 低温容器 静态真空绝热容器 第2部分：设计、制造、检验和测试

This standard specifies requirements for the design, fabrication, inspection and testing of static vacuum insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar. This standard is applicable to static vacuum insulated cryogenic vessels for fluids as specified in EN 13458-1; and does not apply to vessels designed for toxic fluids. For static vacuum insulated cryogenic vessels designed for a maximum allowable pressure of not more than 0,5 bar this standard can be used as a guide.

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

DS/EN 13530-2/AC:2007 低温容器 大型可运输真空绝热容器 第2部分：设计、制造、检验和测试

This standard specifies requirements for the design, fabrication, inspection and testing of large transportable vacuum insulated cryogenic vessels of more than 1000 litres volume, which are permanently (fixed tanks) or not permanently (demountable tanks) attached to a vehicle, for carriage by road.

Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

DS/EN 14197-2/A1:2007 低温容器 静态非真空绝热容器 第2部分：设计、制造、检验和测试

This European Standard specifies requirements for the design, fabrication, inspection and testing of static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar.This European standard applies to static non-vacuum insulated cryogenic vessels for fluids as specified in EN 14197-1 and does not apply to vessels designed for toxic fluids.For static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure of not more than 0,5 bar this European Standard may be used as a guide.

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

LST EN 1251-2-2002/AC-2006 低温容器 容积不超过 1000 升的可运输真空绝热容器 第2部分：设计、制造、检验和测试

Cryogenic vessels - Transportable vacuum insulated vessels of not more than 1000 litres volume - Part 2: Design, fabrication, inspection and testing

LST EN 14197-2-2004/A1-2006 低温容器 静态非真空绝热容器 第2部分：设计、制造、检验和测试

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

LST EN 14197-2-2004/AC-2006 低温容器 静态非真空绝热容器 第2部分：设计、制造、检验和测试

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

LST EN 13530-2-2003/AC-2006 低温容器 大型可运输真空绝热容器 第2部分：设计、制造、检验和测试

Cryogenic vessels - Large transportable vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

LST EN 13458-2-2003/AC-2006 低温容器 静态真空绝热容器 第2部分：设计、制造、检验和测试

Cryogenic vessels - Static vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing

LST EN 12300-2000/A1-2006 低温容器 低温服务的清洁度

Cryogenic vessels - Cleanliness for cryogenic service

DIN EN 14197-2:2006 低温容器.静压非真空绝热容器.第2部分:设计、生产、检查和试验(包括修改件A1-2006)

This European Standard specifies requirements for the design, fabrication, inspection and testing of static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure of more than 0,5 bar. This European Standard applies to static non-vaccum insulated cryogenic vessels for fluids as specified in EN 14197-1 and does not apply to vessels designed for toxic fluids. For static non-vacuum insulated cryogenic vessels designed for a maximum allowable pressure of not more than 0,5 bar this European Standard may be used as a guide.

Cryogenic vessels - Static non-vacuum insulated vessels - Part 2: Design, fabrication, inspection and testing (includes Amendment A1:2006); English version of DIN EN 14197-2:2006-11

DIN EN 12300:2006 冷却罐.低温冷却作业用纯度

This standard specifies the minimum requirements for the cleanliness of all surfaces of cryogenic vessels and associated accessories, that are in contact with the cryogenic fluid at any expected operating conditions. This standard defines the acceptable level of surface and particle contamination to minimize the risk of malfunction of equipment and ensure safety against ignition when in contact with oxygen or oxidizing fluids (see EN 720-2).#,,#

Cryogenic vessels - Cleanliness for cryogenic service Enlish version of DIN EN 12300:2006-09

DS/EN 12300/A1:2006 低温容器 低温服务的清洁度

This standard specifies the minimum requirements for the cleanliness of all surfaces of cryogenic vessels and associated accessories, that are in contact with the cryogenic fluid at any expected operating conditions. This standard defines the acceptable level of surface and particle contamination to minimize the risk of malfunction of equipment and ensure safety against ignition when in contact with oxygen or oxidizing fluids (see EN 720-2).

Cryogenic vessels - Cleanliness for cryogenic service

NF E86-509/A1:2006 低温容器.低温设施的清洁度

Cryogenic vessels - Cleanliness for cryogenic service.

ISO 21014:2006 低温容器.低温绝热性能

This International Standard defines practical methods for determining the heat-leak performance of cryogenic vessels. The methods include measurement on both open and closed systems. This International Standard neither specifies the requirement levels for insulation performance nor when the defined methods should be applied. These requirements may be defined in design or operational standards/regulations.

Cryogenic vessels - Cryogenic insulation performance

KS B ISO 20421-2:2006 低温容器.大型可移动真空隔热容器.第2部分:操作要求

이 규격은 체적 1 000 L 이상의 대용량 이동식 진공 단열 초저온 용기에 대한 사용 요

Cryogenic vessels－Large transportable vacuum-insulated vessels－Part 2：Operational requirements

KS B ISO 21028-2-2006(2016) 低温容器低温下材料的韧性要求第2部分:温度在-80℃～-20℃之间

Cryogenic vessels－Toughness requirements for materials at cryogenic temperature－Part 2：Temperatures between －80 ℃ and －20℃