23.120 通风机、风扇、空调器 标准查询与下载



共找到 973 条与 通风机、风扇、空调器 相关的标准,共 65

本标准适用于安装在工作管路上的通风机的一个工况点或多个工况点性能特性的测定。工作管路特性测定不属于本标准范围。所测气体必须是单一的(单相的)。 注:对通风机产品规定性能的验证试验,应按GB1236的规定。

Site testing of fans

ICS
23.120
CCS
J72
发布
1988-12-22
实施
1989-07-01

本标准是袋式除尘器的基础标准,适用于袋式除尘器的设计、制造和使用。

Classification and specification for bag filters

ICS
23.120
CCS
J09
发布
1986-08-22
实施
1987-05-01

本文件界定了一般用途的绿色低碳智能通风系统用高效轴流风机的设计指标、技术要求、安全性能、测试方法和包装、运输、使用等方面的内容。

Technical requirements of high efficiency fan for green and low carbon intelligent ventilation system

ICS
23.120
CCS
C346
发布
2024-06-06
实施
2024-06-30

Fans. Determination of airflow propelled through an open personnel door by a positive pressure ventilator

ICS
23.120
CCS
发布
2024-05-31
实施
2024-05-31

Fans. Efficiency classification for fans - Calculation of the fan energy index

ICS
23.120
CCS
发布
2024-05-31
实施
2024-05-31

4.1 使用环境 4.2 外观质量 4.3 机械安全防护结构 4.4 机械强度 4.5 开关及导电性能 4.6 外购件、外协件 4.7 抗电强度 4.8 温升 4.9 盲盒关键信息的明示要求 4.10 化学性能 4.10.1 特定元素的迁移 4.10.2 增塑剂

Derivative of fashion figures and similar products for appreciation and collection ——portable fans

ICS
23.120
CCS
C243
发布
2024-05-24
实施
2024-05-24

1 范围 2 规范性引用文件 3 术语和定义 4 形式与基本参数 5 要求 6 试验方法 7 检验规则 8 标志、包装、运输和贮存 9 其他

Data center indirect evaporative cooling tower

ICS
23.120
CCS
I651
发布
2024-05-20
实施
2024-06-20

本文件规定了便携式户外太阳能风扇的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于便携式户外太阳能风扇的生产及检验。

Portable outdoor solar fan

ICS
23.120
CCS
C346
发布
2024-05-13
实施
2024-05-28

本文件规定了电镀生产线换气系统的术语和定义、结构及原理、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于电镀生产线换气系统的生产及检验。

Electroplating production line ventilation system

ICS
23.120
CCS
C346
发布
2024-04-30
实施
2024-05-14

BS EN ISO 5801:2017/Amd 1 Fans - Performance testing using standardized airways. Amendment 1

ICS
23.120
CCS
发布
2024-04-01
实施
2024-04-01

Household and similar electrical air cleaning appliances. Methods for measuring the performance - Particular requirements for determination of particle reduction

ICS
23.120
CCS
发布
2024-03-31
实施
2024-03-31

BS EN IEC 60879 AMD 1 Comfort fans and regulators for household and similar purposes - Methods for measuring performance

ICS
23.120
CCS
发布
2024-03-29
实施
2024-03-29

本文件规定了 MAU 外气空调箱的术语和定义、产品结构、型号与规格、主要参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、产品样本和说明书的基本内容。 本文件适用于 MAU 外气空调箱的生产和检验。

MAU outdoor air conditioning box

ICS
23.120
CCS
C349
发布
2024-03-25
实施
2024-04-09

BS ISO 13348 Fans - Tolerances, methods of conversion and technical data presentation

ICS
23.120
CCS
发布
2024-03-18
实施
2024-03-18

本标准规定了低压驻车空调性能要求、试验方法、检验规则、标志、包装、运输、储存。

Performance requirements for low-voltage parking air conditioner

ICS
23.120
CCS
C346
发布
2024-01-31
实施
2024-01-31

IEC 60335-2-40:2022 deals with the safety of electric heat pumps, sanitary hot water heat pumps and air conditioners, incorporating motor-compressors as well as hydronic fan coils units, dehumidifiers (with or without motor-compressors), thermoelectric heat pumps and partial units. Their maximum rated voltage being not more than 300 V for single phase appliances and 600 V for multi-phase appliances. Appliances not intended for normal household use but which nevertheless can be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. The appliances referenced above can consist of one or more factory-made assemblies. If provided in more than one assembly, the separate assemblies are used together, and the requirements are based on the use of matched assemblies. This document does not take into account refrigerants other than group A1, A2L, A2 and A3 as defined by ISO 817. Flammable refrigerants are limited to those of a molar mass of more than or equal to 42 kg/kmol based on WCF (worst case formulation) as specified in ISO 817. As far as practical, this document deals with common hazards presented by appliances that are encountered in normal use and assumes that installation, servicing, decommissioning, and disposal are safely handled by competent persons and accidental release of refrigerants is avoided. However, it does not prescribe the criteria to ensure competence of persons during installation, servicing and disposal. Safety requirements during disposal are not specified in this standard. Supplementary heaters, or a provision for their separate installation, are within the scope of this standard, but only heaters which are designed as a part of the appliance package, the controls being incorporated in the appliance. Attention is drawn to the fact that - for appliances intended to be used in vehicles or on-board ships or aircraft, additional requirements can be necessary; - in many countries, additional requirements are specified, for example, by the national health authorities responsible for the protection of labour and the national authorities responsible for storage, transportation, building constructions and installations. This document does not apply to - humidifiers intended for use with heating and cooling equipment (IEC 60335-2-88); - appliances designed exclusively for industrial processing; - appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This seventh edition cancels and replaces the sixth edition published in 2018. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Clause 1: added thermoelectric heat pumps to the scope and increased maximum rated voltage to 300 V for single phase appliances; - Clause 7: revised requirements for marking on the appliance and packaging, including a symbol for minimum floor area and modifying the symbol for flammable refrigerants to include the safety group per ISO 817; - Clause 11 and Clause 19: restructured for alignment with Part 1 and added requirements for supplementary air heaters; - Clause 13 and Clause 16: revised requirement for leakage current for stationary class I motor-operated appliances; - Clause 21: added requirements for particle foam material and revised requirements for transport testing; - Clause 22: removed limit on the sum of refrigerant charges for appliances with multiple refrigerating systems, and revised requirements for avoiding ignition sources, leak detection systems, safety shut-off valves, and particle foam material; - Clause 23: added requirements to avoid contact between wires and refrigerant piping; - Clause 24

Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers

ICS
23.120
CCS
发布
2024-01-31
实施

本文件规定了电动驻车空调安装工艺规范的准备、安装步骤、安装工艺要求和试机调试。

Technical specification of installation for electric parking air conditioner

ICS
23.120
CCS
C346
发布
2024-01-31
实施
2024-01-31

BS ISO 5222-3 Heat recovery ventilators and energy recovery ventilators -Testing and calculating methods for seasonal performance factor - Part 3: Annual sensible heating and cooling recovery performance factor of heat recovery ventilators

ICS
23.120
CCS
发布
2024-01-26
实施
2024-01-26

Fans. Efficiency classification for fans - General requirements

ICS
23.120
CCS
发布
2023-12-31
实施
2023-12-31

Energy efficiency limits and energy efficiency grades of blowers for sewage treatment

ICS
23.120
CCS
J72
发布
2023-12-29
实施
2024-07-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号