25.060.20 分度和刀具/工件夹持装置 标准查询与下载

KS B 4014-2020 7/24主轴头和刀柄锥度

7/24 Tapers for spindle noses and tool shanks

KS B 4409-2020 加工中心 - 刀具柄和挽留KNOBS

Machining centers — Tool shanks and pull studs

KS B 5230-2019 莫氏锥度规

Morse taper gauges

T/TZZL 6-2019 HV系列立卧式回转工作台

HV系列立卧回转工作台，一种精度保持性好、操作方便灵活、锁紧可靠、寿命长、配套性好的高精确度的立卧式回转工作台，主要特点包括：工作台的蜗轮与主体采用分体式结构、蜗杆通过两套轴向平面轴承转动、外置锁紧机构、附件选配可调尾座、并带有偏心顶尖。 本标准规定了HV系列立卧式回转工作台的型号，参数、要求、试验方法、检验规则、标志、包装、运输和贮存。

HV series vertical and horizontal rotary table

T/TZZL 5-2019 BS系列机械分度头

BS系列机械分度头 具有快速分度的24孔以实现2.3.4.6.8.12.24快速等分分度、主轴通过安装在前后端的滚动轴承转动更加灵活并带有可调尾座附件、工作效率高、精度保持性好、使用方便快捷的高精度分度头。 本标准规定了BS系列机械分度头的型号，参数、要求、试验方法、检验规则、标志、包装、运输和贮存。

BS series mechanical dividing head

JB/T 13644-2019 回转油缸 可靠性试验规范

Rotary cylinder reliability test specifications

JB/T 13642-2019 动力卡盘 可靠性试验规范

Power chuck reliability test specifications

JB/T 13648-2019 数控转台 可靠性试验规范

CNC turntable reliability test specifications

JB/T 13647-2019 数控转台 精度保持性试验规范

CNC turntable accuracy maintenance test specifications

JB/T 13646-2019 数控刀架 可靠性试验规范

CNC tool holder reliability test specifications

JB/T 13645-2019 数控刀架 精度保持性试验规范

CNC tool holder accuracy maintenance test specifications

JB/T 13643-2019 动力卡盘 性能试验规范

Power chuck performance test specifications

T/CATA 0140-2018 可重构柔性型架安装技术要求

本标准规定了可重构柔性型架（以下简称型架）的构成和标识、安装技术要求及安装检验。 本标准适用于型架的安装和使用。

Mounting requirements for flexible reconfigurable fixture

T/CATA 0139-2018 可重构柔性型架零组件品种规格及技术要求

本标准规定了可重构柔性型架（以下简称型架）零组件的技术要求、质量保证规定、交货准备、保养等。 本标准适用于在生产加工、装配和维修时作定位或紧固用的可重构柔性型架零组件。

Variety and technical requirements for parts of reflexible reconfigurable fixture

DIN ISO 12164-4:2018 带法兰接触面的空心锥形接口 第4部分：固定工具接收器的尺寸（ISO 12164-4:2014）

This part of ISO 12164 specifies dimensions for receivers with taper and flange contact surfaces for hollow taper shanks in accordance with ISO 12164-3 to be applied to machine tools (e. g. turning machines, turning-mill machines). A range of sizes is specified. This part of ISO 12164 specifies the receiver of type T. It is for automatic tool exchange and manual clamping, which is achieved via holes in both the receiver and the tool shank.

Hollow taper interface with flange contact surface - Part 4: Dimensions of receivers for stationary tools (ISO 12164-4:2014)

DIN ISO 12164-3:2018 带法兰接触面的空心锥形接口 第3部分：固定工具的柄部尺寸（ISO 12164-3:2014）

This part of ISO 12164 specifies dimensions for hollow taper shanks with flange contact surface (HSK) to be applied to machine tools (e. g. turning machines, turning-mill machines). A range of shank sizes is specified. This part of ISO 12164 specifies the shank of type T. It incorporates a grooved flange to enable automatic tool exchange. The tools can also be exchanged manually via a hole in the shank taper.

Hollow taper interface with flange contact surface - Part 3: Dimensions of shanks for stationary tools (ISO 12164-3:2014)

ASTM E2497-11(2017) 资产移动速度计算标准实践（AMV）

1.1 This practice calculates asset movement velocity (AMV) based on the movement of assets. 1.2 There is no existing, recognized practice for calculating AMV. 1.3 This practice is designed to be applicable and appropriate for all asset-holding entities. 1.4 This practice does not cover material inventory. Inventory velocity (or inventory turns) is extensively described and discussed in supply chain literature and is based on throughput rather than movement transactions. 1.5 AMV can be calculated for the entirety of the asset inventory of the entity or any defined subset, including individual assets. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Calculation of Asset Movement Velocity (AMV)

BS ISO 26622-1:2017 带球轨系统的模块锥形接口.柄的尺寸和标注

Modular taper interface with ball track system. Dimensions and designation of shanks

ISO 26622-1:2017 带球轨系统的模块锥形接口.第1部分:柄尺寸和标注

This document specifies the dimensions for modular taper interface with ball track system: tapered shanks for automatic and manual tool exchange to be applied on machine tools (e.g. lathe machines, drilling machines, milling machines and turn/milling machine centres). A range of shank sizes is specified and details of the coolant-sealing O-ring are specified in Annex A. The shank incorporates a flange with a groove to enable automatic tool exchange. The tools can also be exchanged manually. The clamping of the shank can be realized by the use of locking balls of a standard size and by a variety of mechanisms. The torque is transmitted at the tail end of the shank by friction, locking elements and keys.

Modular taper interface with ball track system - Part 1: Dimensions and designation of shanks

KS B 3206-2017 钻孔用夹具衬套及附件 尺寸

Jig bushes and accessories for drilling purposes — Dimensions