25.080.20 镗床和铣床 标准查询与下载

DLA A-A-55803 A VALID NOTICE 1-2003 主轴电动3.0-7.5马力电脑数字控制3轴立式型铣床

A-A-55803A, dated 14 November 1996, has been reviewed and determined to be valid for use in acquisition

MILLING MACHINE, VERTICAL KNEE TYPE, 3 AXIS, COMPUTER NUMERICAL CONTROL, 3.0 TO 7.5 HORSEPOWER SPINDLE DRIVE

KS B 4048-2002 卧式镗铣床（落地式）精度检验

Testing of the accuracy for boring and milling machines(Floor type)with horizontal spindle

KS B 4042-2002 滚齿机验收条件精度试验

Acceptance conditions for gear hobbing machines－Testing of the accuracy

KS B 4213-2002 变高工作台铣床试验条件精度试验第3部分:立式主轴铣床

Test conditions for milling machines with table of variable height－Testing of accuracy－Part 3：Machines with vertical spindle

KS B 4223-2002(2012) 数控卧式镗床（台式）性能和精度试验规程

Test code for performance and accuracy of numericallycontrolled horizontal boring machines(Table type)

KS B 4009-2002(2012) 机床振动测试方法

Methods of vibration testing for machine tools

KS B 4086-2002 台式卧式镗铣床精度试验方法

Table type horizontal boring and milling machines－Testing of the accuracy

KS B 0703-2002(2022) 二合一捻线机动态振动试验方法

Method of test for dynamic vibration of two - for - one twister

KS B 0703-2002(2017) 试验方法的两个为一个捻线的动态吸振

Method of test for dynamic vibration of two - for - one twister

KS B 0703-2002 倍捻机旋转振动试验方法

이 규격은 150∼300 rev/s의 회전 속도로 운전되는 투포원 연사기(이하 “연사기”라

Method of test for dynamic vibration of two - for - one twister

KS B 4211-2001(2006) 测试和床型垂直铣削的检查

Test code for performance and accuracy of bed type vertical milling machines

KS B 4033-2001(2006) 膝型立式铣床精度试验方法

Knee type vertical milling machines－Testing of the accuracy

KS B 4032-2001(2006) Nihyeong卧式铣床 - 精度检验

Knee type horizontal milling machines－Testing of the accuracy

KS B 4209-2001(2006) 台式卧式铣床性能和精度试验规程

Test code for performance and accuracy ofbed type horizontal milling machines

BS ISO 1984-2:2001 固定高度工作台的手工控制铣床的试验条件.精度试验.带有垂直主轴的机器

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a vertical spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1]. NOTE Numerically controlled milling machines are covered by ISO 10791-2[2].

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with vertical spindle

BS ISO 1984-1:2001 固定高度工作台的手工控制铣床的试验条件.精度试验.带有水平主轴的机器

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a horizontal spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to the checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841[1]. NOTE Numerically controlled milling machines are covered by ISO 10791 -1 [2].

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Machines with horizontal spindle

NF E60-421:2001 机床的安全性.铣床(包括镗床)

Safety of machine-tools - Milling machines (including boring machines).

BS EN 13128:2001 机床安全性.铣床(包括镗床)

1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5). Machines covered by this standard include but are not limited to: - knee and column type milling machines (see figures C.1, C.2); - bed-type milling machines (see figure C.3); - multi-spindle milling machines (see figures C.4 and C.5); - plano-milling machines (see figures C.4 and C.5); - profile and contouring milling machines (see figure C.6), - milling and boring machines (see figure C.7). 2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 6 Milling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Milling machines (including boring machines)

BS EN 13128:2001+A2:2009 机床安全性.铣床(包括镗床)

1.1 This standard specifies the technical safety requirements and measures to be adopted by persons undertaking the design, construction and supply (including installation and dismantling, with arrangements for transport and maintenance) of milling machines (see 3.1) including machines capable of performing boring operations (see 3.5). Machines covered by this standard include but are not limited to: ? knee and column type milling machines (see figures C.1, C.2); ? bed–type milling machines (see figure C.3); ? multi–spindle milling machines (see figures C.4 and C.5); ? plano–milling machines (see figures C.4 and C.5); ? profile and contouring milling machines (see figure C.6), ? milling and boring machines (see figure C.7). 1.2 This standard takes account of intended use including reasonably foreseeable misuse, maintenance, cleaning, and setting operations. It presumes access to the machine from all directions. It describes means to reduce risks to operators and other exposed persons. 1.3 This standard also applies to workpiece transfer devices when they form an integral part of the machine. 1.4 This standard deals with significant hazards relevant to milling machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.5 Hazards arising from other metal working processes (e.g. grinding, turning, forming, EDM, laser processing) are covered by other standards (see Bibliography). 1.6 Milling machines with automatic tool changing capabilities are not covered by this standard (see prEN 12417:1996). 1.7 This standard is not applicable to milling machines which were manufactured before the date of publication by CEN of this standard.

Safety of machine tools - Milling machines (including boring machines)

ISO 1984-2:2001 床身铣床检验条件.精度检验.第2部分:立式铣床

This part of ISO 1984 specifies, with reference to ISO 230-1, both geometric and machining tests on general purpose and normal-accuracy milling machines with table of fixed height and with a vertical spindle. It also specifies the applicable tolerances corresponding to the above-mentioned tests. This part of ISO 1984 deals only with the verification of the geometric accuracy of the machine. It does not apply to the testing of the machine operation (vibrations, abnormal noises, stick-slip motion of components, etc.), nor to checking of its characteristics (speeds, feeds, etc.), which should generally be checked before testing the accuracy. This part of ISO 1984 defines the terminology used for the principal elements of the machine and indicates the designation of axes in accordance with ISO 841 fl. NOTE Numerically controlled milling machines are covered by ISO 10791-2t2l

Test conditions for manually controlled milling machines with table of fixed height - Testing of the accuracy - Part 2: Machines with vertical spindle