25.120.10 锻压设备、冲压机、剪切机 标准查询与下载

KS B ISO 9189:2019 机床 - 直线式高速机械动力压力机 从250 kN到4000 kN额定力 - 特性和尺寸

Machine tools — Straight-sided high-speed mechanical power presses from 250 kN up to and including 4 000 kN nominal force — Characteristics and dimensions

KS B ISO 9188:2019 机床 - 直线单动力机械动力压力机 从400 kN到4000 kN额定力 - 特性和尺寸

Machine tools — Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force — Characteristics and dimensions

KS B ISO 9188-2019 机床 - 直线单动力机械动力压力机 从400 kN到4000 kN额定力 - 特性和尺寸

Machine tools — Straight-sided single-action mechanical power presses from 400 kN up to and including 4 000 kN nominal force — Characteristics and dimensions

T/CMTBA 1007-2019 锻压机械 产品质量通用等级评定

本标准规定了锻压机械产品质量等级、评定要求、抽样、检测和评定方法等。 本标准适用于锻压机械产品（以下简称产品）质量通用等级评定，各类锻压机械产品应参照本标准制定相应的产品质量等级评定方法。

Metalforming machinery—Evaluation of general level for the product quality

KS B ISO 10242-2-2019 压制工具 冲头支架柄 第2部分：C 型

Tools for pressing — Punch holder shanks — Part 2: Type C

KS B ISO 10242-1-2019 压制工具 冲头支架柄 第1部分：A 型

Tools for pressing — Punch holder shanks — Part 1: Type A

KS B ISO 6753-1-2019 冲压和成型工具 机加工板 第1部分：冲压工具用机加工板

Tools for pressing and moulding — Machined plates — Part 1: Machined plates for press tools

KS B ISO 10242-3-2019 压制工具 冲头支架柄 第3部分：D 型

Tools for pressing — Punch holder shanks — Part 3: Type D

T/ZZB 1411-2019 数控卷簧机

本标准规定数控卷簧机的术语和定义、型式和名称、基本参数、基本要求、技术要求、试验方法、检验规则、包装、标志和运输、随机附件、质量承诺。 本标准适用于冷卷双工位及多工位的数控卷簧机。

CNC spring coiling machine

ISO 21223:2019 冲压工具.词汇

This document establishes the terms and definitions of the main types of tools for pressing, their features and dimensional characteristics. Some of these terms refer to components whose functions are shown in Figure 1, Figure 2 and Annex A. This document is intended to serve as a reference for users and manufacturers of tools for pressing. This document is used for understanding of technical terms and applicable for communication and trade of tools for pressing. NOTE The figures are given only as examples to illustrate the terms and definitions.

Tools for pressing — Vocabulary

T/ZZB 1308-2019 半闭式精密压力机

本标准规定了半闭式精密压力机的术语和定义、基本要求、技术要求、试验方法、检验规则、包装、标志与运输、贮存及质量承诺。 本标准适用于公称能力在80-315吨的半闭式精密压力机（以下简称“压力机”）。

Semi-straight side mechanical power presses

T/SDMTGM 0006-2019 绿色设计产品评价技术规范 大型机床 闭式伺服压力机

本标准规定了闭式伺服压力机绿色设计产品的评价要求、生命周期评价报告编制和评价方法

Technical Specification for Green-design Product Assessment Large Machine Straight Mechanical Servo Press

T/SDMTGM 0005-2019 绿色制造 闭式伺服压力机绿色设计导则

本标准规定了闭式伺服压力机绿色设计的总体要求、设计程序及技术要求等。

Green manufacturing Guideline for green design of Straight Mechanical Servo Press

T/ZZB 1190-2019 数控冷辗环机

本标准规定了数控冷辗环机的术语和定义、型号与基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输与贮存和质量承诺。 本标准适用于加工工件外径为30 mm～350 mm的数控冷辗环机。

NC cold rolling machine for rings

ISO 10243:2019 压制工具 - 带矩形截面的压缩弹簧 - 外壳尺寸和颜色编码

This document establishes the technical specifications for compression springs made from rectangular wires. The parameters set in this document are applicable to springs which are set. This document does not attempt to specify the quality of the springs themselves, nor all of their dimensions (e.g. cross-section), their material or their length of life. The springs are classified into spring rates: light, medium, strong and extra strong. For each spring rate, this document gives a colour code.

Tools for pressing — Compression springs with rectangular section — Housing dimensions and colour coding

T/ZZB 1014-2019 1&2系列螺丝成型冷镦机

本标准规定了1&2系列螺丝成型冷镦机的术语和定义、型号和基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、贮存与运输和质量承诺。 本标准适用于全封闭罩壳型式的1&2系列螺丝成型冷镦机(以下简称冷镦机）。

1 Die 2 blow series screw cold forming machine

T/ZZB 0851-2018 高刚性精密开式多工位压力机

本标准规定了高刚性精密开式多工位压力机的术语和定义、基本要求、技术要求、试验方法、检验规则、包装、标志与运输及质量承诺。 本标准适用于高刚性精密开式多工位压力机（以下简称“压力机”）。

High rigidity precision gap frame transfer press

ISO/DIS 11901-1:2018 压制工具 气弹簧 第 1 部分：通用规范

Tools for pressing — Gas springs — Part 1: General specifications

BS ISO 20929:2018 用于压制的工具 大型冲压和成型模具中的跟部导向装置

What is this standard about? This document specifies dimensions for heel guidings in large stamping and forming dies. It also gives example applications and an example for ordering.

Tools for pressing. Heel guidings in large stamping and forming dies

BS ISO 20928:2018 用于压制的工具 弹簧柱塞采用螺旋压缩钢弹簧或气弹簧

1   Scope This document specifies dimensions, stroke and forces of spring plungers with steel spring or gas spring. This document applies to spring plungers which are used in tool manufacture for separating the tool and the sheet-metal part after stamping or forming operations. It also gives information concerning their use and installation example of spring plungers steel spring or gas spring.

Tools for pressing. Spring plungers with helicoidal compression steel spring or gas spring