25.220.50 标准查询与下载

GSO ISO 28762:2013 瓷釉 将釉涂在钢上以便在表面上书写 规范

This International Standard specifies the requirements for the functional and aesthetic characteristics of vitreous and porcelain enamel coatings applied to plain steel, for use as writing surfaces (whiteboards and chalkboards).

Vitreous and porcelain enamels -- Enamel coatings applied to steel for writing surfaces -- Specification

GSO ISO 2747:2013 瓷釉 搪瓷炊具 耐热冲击性的测定

  Scope is not provided for this standard

Vitreous and porcelain enamels -- Enamelled cooking utensils -- Determination of resistance to thermal shock

GSO ISO 28721-3:2013 瓷釉 制造过程用内衬玻璃装置 第3部分：耐热震性

This part of ISO 28721 specifies requirements for the thermal shock resistance of, and heating and cooling procedures for, glass-lined apparatus, components, accessories and pipes primarily used for process equipment in chemical plants. It specifies the limits of thermal shock resistance using diagrams (see Figure 1 and Figure 2). For glass-lined steel, a distinction is made between a thermal shock on the glass-lined side (produced by charging an apparatus) and a thermal shock on the steel side (produced by heating or cooling an apparatus). This part of ISO 28721 applies to operating temperatures from − 25 °C to + 230 °C. It is only applicable to enamelled unalloyed and low-alloy carbon steels.

Vitreous and porcelain enamels -- Glass-lined apparatus for process plants -- Part 3: Thermal shock resistance

GSO ISO 4528:2013 玻璃和陶瓷的搪瓷饰面 测试方法的选择 搪瓷玻璃和陶瓷材料

This International Standard is a guide to the selection of test methods for evaluating the performance of vitreous and porcelain enamelled finishes in different applications. It references the test methods available for measuring the properties of these finishes, and correlates these properties to requirements of specific enamelled articles. It is limited for the most part to test methods that are described in ISO International Standards and does not provide acceptance criteria or performance limits for the properties. This International Standard applies to all enamelled articles irrespective of their basis metals.

Vitreous and porcelain enamel finishes -- Selection of test methods for vitreous and porcelain enamelled areas of articles

GSO ISO 28764:2013 瓷质玻璃涂层 生产用于测试钢、铝和铸铁板上瓷质的样品

This International Standard specifies a method for the production of specimens suitable for testing vitreous and porcelain enamel coatings. It specifies two different specimens: — specimens taken from production articles; — specially produced specimens. NOTE Only the specially produced specimens can be used when the loss in mass per unit area of the enamel coating is to be determined quantitatively, as specimens cut from enamelled articles can reduce the accuracy of the test method.

Vitreous and porcelain enamels -- Production of specimens for testing enamels on sheet steel, sheet aluminium and cast iron

GSO ISO 6486-2:2013 陶瓷器皿、陶瓷器具 与食品接触的玻璃和食品器具 与食品接触的搪瓷器具中铅和镉的释放量 第2部分：允许限值

This part of ISO 6486 specifies permissible limits for the release of lead and cadmium from ceramic ware, glass-ceramic ware and glass dinnerware intended to be used in contact with food, but excluding porcelain enamel articles. This part of ISO 6486 is applicable to ceramic ware, glass-ceramic ware and glass dinnerware which is intended to be used for the preparation, cooking, serving and storage of food and beverages, excluding articles used in food manufacturing industries or those in which food is sold.

Ceramic ware, glass-ceramic ware and glass dinnerware in contact with food -- Release of lead and cadmium -- Part 2: Permissible limits

GSO ISO 4531-1:2013 玻璃和陶瓷搪瓷涂层 食品接触涂漆器皿中铅和镉的释放量 第1部分：测试方法

This part of ISO 4531 specifies a simulating method of test for determination of the release of lead and cadmium from enamelled ware which are intended to come into contact with food (including drinks). This part of ISO 4531 is applicable to enamelled ware including tanks and vessels which are intended to be used for the preparation, serving and storage of food. This part of ISO 4531 is applicable to enamelled ware including tanks and vessels which can be used for the preparation, serving and storage of food. This part of ISO 4531 also specifies a method of test for determining the release of lead and/or cadmium from a drinking rim. It is not applicalble to ceramic ware, glassware or glass ceramic ware.

Vitreous and porcelain enamels -- Release of lead and cadmium from enamelled ware in contact with food -- Part 1: Method of test

DIN ISO 6370-2:2013 釉瓷和搪瓷.耐磨性测定.第2部分:次表面磨损后的质量损失(ISO 6370-2-2011)

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2011)

LST EN ISO 28721-4:2013 搪瓷和搪瓷 加工厂用搪玻璃设备 第4部分：搪玻璃法兰钢管和法兰钢管件的质量要求（ISO 28721-4:2010）

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings (ISO 28721-4:2010)

DS/EN ISO 28721-4:2013 搪瓷和搪瓷 加工厂用搪玻璃设备 第4部分：搪玻璃法兰钢管和法兰钢管件的质量要求

ISO 28721-4:2010 specifies the quality requirements for glass-lined flanged steel pipes and flanged steel fittings used for process plants.

Vitreous and porcelain enamels - Glass-lined apparatus for process plants - Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings

ASTM D7786-12 测定搪瓷形成正常光泽的性能标准试验方法

This standard may be used by paint companies and raw material suppliers to assess the interactions of primers and topcoats with respect to their ability to provide good enamel holdout. Primer/topcoat systems with the best enamel holdout will result in desirable gloss in the first coat of topcoat application.1.1 This standard provides a method for determining the holdout characteristics of a primer and topcoat coating application. A standard topcoat is used to determine the absorption characteristics of a primer. Enamel holdout can be measured as a difference in observed gloss of the topcoat over a primer, relative to the gloss of the same topcoat over a non-porous smooth surface. 1.2 The standard is written in the context that the user will be evaluating the enamel holdout characteristics of a primer. Alternatively, the standard may be used as a method to evaluate the enamel holdout characteristics of primer/topcoat system where the primer is constant and different topcoats are used as test paints. 1.3 This standard may also be used for evaluation of paints other than primers as the first coat. In this alteration the user can test the enamel holdout characteristics of a self primed topcoat, or use of any other type of paint as the primer followed by the use of a standard topcoat. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Enamel Holdout

ISO 6370-2:2011 玻璃质和搪瓷抗磨性测定.第2部分:次表层磨损后的质量损失

Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion

DS/EN ISO 28706-5:2011 搪瓷和搪瓷 耐化学腐蚀的测定 第5部分：封闭系统中耐化学腐蚀的测定

ISO 28706-5:2008 specifies a test method for the determination of the resistance of vitreous and porcelain enamelled articles to attack in closed systems by acid, neutral and alkaline liquids, as well as by actual process mixes. It applies primarily to the testing of enamels designed for use in chemical processes.

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems

LST EN ISO 28706-1:2011 搪瓷和搪瓷 耐化学腐蚀的测定 第1部分：室温下耐酸化学腐蚀的测定（ISO 28706-1:2008）

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 1: Determination of resistance to chemical corrosion by acids at room temperature (ISO 28706-1:2008)

LST EN ISO 28706-4:2011 搪瓷和搪瓷 耐化学腐蚀的测定 第4部分：使用圆柱形容器测定耐碱性液体的化学腐蚀（ISO 28706-4:2008）

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 4: Determination of resistance to chemical corrosion by alkaline liquids using a cylindrical vessel (ISO 28706-4:2008)

LST EN ISO 28706-3:2011 搪瓷和搪瓷 耐化学腐蚀的测定 第3部分：使用六角容器测定耐碱性液体的化学腐蚀（ISO 28706-3:2008）

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel (ISO 28706-3:2008)

LST EN ISO 28706-2:2011 搪瓷和搪瓷 耐化学腐蚀的测定 第2部分：耐沸腾酸、沸腾中性液体和/或其蒸气的化学腐蚀的测定（ISO 28706-2:2008）

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 2: Determination of resistance to chemical corrosion by boiling acids, boiling neutral liquids and/or their vapours (ISO 28706-2:2008)

LST EN ISO 28706-5:2011 搪瓷和搪瓷 耐化学腐蚀的测定 第5部分：封闭系统中耐化学腐蚀的测定（ISO 28706-5:2010）

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010)

DS/EN ISO 28763:2011 搪瓷和搪瓷 用于空气-气体和气体-气体热交换器的蓄热式、搪瓷和填充板-规范

ISO 28763:2008 specifies the minimum requirements and the functional characteristics of enamel coatings applied by any process, such as wet dipping, wet flow-coating, wet spraying, wet electrostatic spraying, wet electrodeposition or dry-powder electrostatic spraying, to profiled steel heat exchanger panels in regenerative heat exchangers, before and after packing in baskets.

Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications

DIN EN ISO 28706-5:2011 釉层和搪瓷.耐化学腐蚀性的测定.第5部分:在封闭系统中测定耐化学腐蚀性(ISO 28706-5-2010);德文版本EN ISO 28706-5-2011

Vitreous and porcelain enamels - Determination of resistance to chemical corrosion - Part 5: Determination of resistance to chemical corrosion in closed systems (ISO 28706-5:2010); German version EN ISO 28706-5:2011