29.040.10 绝缘油 标准查询与下载

DIN EN 62535:2009 绝缘液体.测定使用和不使用绝缘油中潜在腐蚀性硫磺的试验方法(IEC 62535-2008).德文版本EN 62535-2009

Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil (IEC 62535:2008); German version EN 62535:2009

DIN EN 61039:2009 绝缘液体的分类(IEC 61039-2008).德文版本EN 61039-2008

Classification of insulating liquids (IEC 61039:2008); German version EN 61039:2008

BS EN 60422:2009 电气设备中的矿物绝缘油 监督和维护指南

Mineral insulating oils in electrical equipment. Supervision and maintenance guidance

BS EN 62535:2009 绝缘液.检测用过和未用过的绝缘油中的潜在腐蚀性硫的试验方法

This International Standard specifies a test method for detection of potentially corrosive sulphur in used and unused mineral insulating oil. Most recent failures due to corrosive sulphur are related to the formation of copper sulphide deposits in and on the surface of winding cellulosic paper. The test method uses a copper conductor, wrapped with one layer of paper, immersed in the oil and heated to evaluate the capability of the oil to yield copper sulphide and transfer it to paper layers. The growth of copper sulphide on bare copper may cause the presence of conductive particulates in the oil, which can act as nuclei for electrical discharge and may lead to a fault. Other test methods exist using a bare copper strip immersed in oil and heated to detect the corrosive behaviour of oil against copper. ASTM D1275 Method B is also used for this test and a modified procedure using low oil volumes is included in Annex A. Tests with and without paper are considered as complementary and may lead to different results.

Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil

LST EN 62535-2009 绝缘液体 检测用过和未用过的绝缘油中潜在腐蚀性硫的测试方法（IEC 62535:2008）

Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil (IEC 62535:2008)

DS/EN 62535:2009 绝缘液体 检测用过的和未用过的绝缘油中潜在腐蚀性硫的试验方法

This International Standard specifies a test method for detection of potentially corrosive sulphur in used and unused mineral insulating oil.Most recent failures due to corrosive sulphur are related to the formation of copper sulphide deposits in and on the surface of winding cellulosic paper.The test method uses a copper conductor, wrapped with one layer of paper, immersed in the oil and heated to evaluate the capability of the oil to yield copper sulphide and transfer it to paper layers.The growth of copper sulphide on bare copper may cause the presence of conductive particulates in the oil, which can act as nuclei for electrical discharge and may lead to

Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil

NF C27-603*NF EN 62535:2009 绝缘液体.用过和未用过的绝缘油中潜在腐蚀性硫检测的试验方法

Insulating Liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil.

BS 148:2009 变压器和开关装置用再生矿物绝缘油.规范

This British Standard specifies requirements for reclaimed oxidation inhibited and uninhibited mineral insulating oils, as delivered, for use in transformers, switchgear and similar electrical equipment in which oil is required as an insulant or for heat transfer. Oils with and without additives are within the scope of this standard. This standard does not differentiate between the methods used to reclaim used mineral insulating oil; thus it is also applicable to oils having undergone a re‑refining process. This standard does not apply to mineral insulating oils used as impregnates in cables or capacitors, or to hydrocarbon insulating liquids obtained by synthesis.

Reclaimed mineral insulating oil for transformers and switchgear – Specification

CAN/CSA-C50-2008(C2013) 变压器和开关设备用矿物电绝缘油

1 Domaine d’application 1.1 Cette norme prescrit les exigences visant les huiles minérales d’origine pétrolière destinées aux transformateurs, aux disjoncteurs à bain d’huile et aux autres appareils électriques (sauf les câbles haute tension) dont l’isolation et le refroidissement sont assurés par un liquide. 1.2 Dans les normes CSA, le terme «doit» indique une exigence, c.-à-d., une prescription que l’utilisateur doit respecter pour assurer la conformité à la norme ; «devrait» indique une recommandation ou ce qu’il est conseillé mais non obligatoire de faire ; et «peut», une possibilité ou un conseil. Les notes qui accompagnent les articles ne comprennent pas de prescriptions ni de recommandations. Elles servent à séparer du texte les explications ou les renseignements qui ne font pas proprement partie de la norme. Les notes au bas des figures et des tableaux font partie de ceux-ci et peuvent être rédigées comme des prescriptions. Les annexes sont qualifiées de normatives (obligatoires) ou d’informatives (facultatives) pour en préciser l’application.

Mineral electrical insulating oils for transformers and switching equipment

LST EN 61039-2009 绝缘液体分类（IEC 61039:2008）

Classification of insulating liquids (IEC 61039:2008)

EN 62535:2009 绝缘液体 检测用过的和未用过的绝缘油中潜在腐蚀性硫的试验方法

IEC 62535:2008 specifies a test method for detection of potentially corrosive sulphur in used and unused mineral insulating oil. Most recent failures due to corrosive sulphur are related to the formation of copper sulphide deposits in and on the surface of winding cellulosic paper. The test method uses a copper conductor, wrapped with one layer of paper, immersed in the oil and heated to evaluate the capability of the oil to yield copper sulphide and transfer it to paper layers. The growth of copper sulphide on bare copper may cause the presence of conductive particulates in the oil, which can act as nuclei for electrical discharge and may lead to a fault. Other test methods exist using a bare copper strip immersed in oil and heated to detect the corrosive behaviour of oil against copper. ASTM D1275 Method B is also used for this test and a modified procedure using low oil volumes is included in Annex A. Tests with and without paper are considered as complementary and may lead to different results.

Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil

CAN/CSA-C50-2008(R2013) 变压器和开关用矿物绝缘油 电气用

1 Scope 1.1 This Standard specifies requirements for mineral oil of petroleum origin for use in transformers, oil circuit breakers, or other electrical equipment (excluding high-voltage cables) requiring a liquid insulating and cooling medium. 1.2 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application.

Mineral insulating oil, electrical, for transformers and switches

EN 61039:2008 绝缘液体的分类

IEC 61039:2008 establishes the detailed classification of the N family (insulating liquids) that belongs to class L (lubricants, industrial oils and related products) in accordance with ISO 8681 and ISO 6743-99, affecting product categories that include products derived from petroleum processing, synthetic chemical products and synthetic and natural esters. The main change with regard to the previous edition concerns the updating of the classification of insulating liquids, taking into account the largest number possible of substances that have, or may have, possible application in electrical components.

Classification of insulating liquids

IEC 61039:2008 绝缘液的分类

This International Standard establishes the detailed classification of the N family (insulating liquids) that belongs to class L (lubricants, industrial oils and related products) in accordance with ISO 8681 and ISO 6743-99, affecting product categories that include products derived from petroleum processing, synthetic chemical products and synthetic and natural esters.

Classification of insulating liquids

DL/T 1095-2008 变压器油带电度现场测试导则

本标准规定了运行中变压器油带电度的现场测试方法。 本标准适用于220kV及以上电压等级强迫油循环变压器油的带电度测量。

Guide to on-site determination of electrostatic charging tendency of transformer oil

DL/T 1096-2008 变压器油中颗粒度限值

本标准规定了500kV及以下变压器油中颗粒度宜达到的质量标准。 本标准适用于500kV及以上变压器、电抗器油的质量监督。

Limited value of particulate pollutant of transformer oils

DL/T 1094-2008 电力变压器用绝缘油选用指南

本标准规定了变压器用油的选用原则。 本标准适用于油浸式变压器、电抗器、互感器等设备，其中包括500kV及以上超高压和特高压交流和换流变压器、并联和平波电抗器、互感器用的新（未被使用过的）变压器油的选用。

Guide to the choice of power transformer oil

DIN EN 60970:2008 绝缘液体 粒子计数和大小测定的方法

Insulating liquids - Methods for counting and sizing particles (IEC 60970:2007); German version EN 60970:2007 + Corrigendum: 2008

DIN EN 62021-2:2008 绝缘液体.酸度的测定.第2部分:比色滴定法(IEC 62021-2-2007)

Insulating liquids - Determination of acidity - Part 2: Colourimetric titration (IEC 62021-2:2007); German version EN 62021-2:2007

DIN EN 60599:2008 使用中的浸渍矿物油的电气设备.溶解和游离气体分析结果解释的指南

Mineral oil-impregnated electrical equipment in service - Guide to the interpretation of dissolved and free gases analysis (IEC 60599:1999 + A1:2007); German version EN 60599:1999 + A1:2007