共找到 1215 条与 低压开关装置和控制器 相关的标准,共 81 页
本文件规定了低压综合配电箱的使用环境条件、功能单元、技术工艺要求、试验方法、检验规则、设计图纸、说明书和试验报告以及标志包装、贮运、安装和维护等内容。
General technical specification for low-voltage integrated distribution box
本文件规定了标准化低压成套开关柜的分类、技术要求、试验方法、检验规则、标志、包装、贮运、安装和维护等内容。
General technical specification for standardized low-voltage switch assemblies
Corrigendum 2 - Low-voltage switchgear and controlgear - Part 1: General rules
Low-voltage switchgear and controlgear assemblies - Part 3: Distribution boards intended to be operated by ordinary persons (DBO)
IEC 60947-5-8:2020 is available as IEC 60947-5-8:2020 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60947-5-8:2020 specifies requirements for three-position enabling switches. These switches are used as components of enabling devices to provide signals that, - when activated, allow machine operation to be initiated by a separate start control, and - when de-activated, -- initiate a stop function, and -- prevent initiation of machine operation. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - due to the increasing range of useful applications of three-position enabling switches, note of scope, operational characteristics and tests are reviewed; - figures for example of devices incorporating enabling switch are added in Annex A; - new Annex B for procedure to determine reliability data for the switch used in functional safety applications is added.
Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches
IEC 60947-1:2020 applies, when required by the relevant product standard, to low-voltage switchgear and controlgear hereinafter referred to as "equipment" or “device” and intended to be connected to circuits, the rated voltage of which does not exceed 1 000 V AC or 1 500 V DC. This document states the general rules and common safety requirements for low-voltage switchgear and controlgear, including: - definitions; - characteristics; - information supplied with the equipment; - normal service, mounting and transport conditions, decommissioning and dismantling; - constructional and performance requirements; - verification of characteristics and performance; - energy efficiency aspects (see Annex V); - environmental aspects. This sixth edition cancels and replaces the fifth edition published in 2007, Amendment 1:2010 and Amendment 2:2014. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: – DC values testing improvement; – update of EMC tests; – Annex B deletion; – update of requirements for environmental tests (Table Q.1); – improvement of Annex R (new examples); – deletion of digital input Type 2, and introduction of Type 3 in Annex S; – example for materials declaration (Annex W); – new Annex X (co-ordination between short-circuit protective devices associated in the same circuit) created. The contents of the corrigendum of December 2022 have been included in this copy.
Low-voltage switchgear and controlgear - Part 1: General rules
本文件规定了户外不锈钢动力配电箱的术语和定义、正常使用条件、功能单元的划分和要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于户外不锈钢动力配电箱生产和检验。
Outdoor stainless steel power distribution box
本文件规定了智能相控开关柜的术语和定义、一般要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于智能相控开关柜生产和检验。
Intelligent phase-controlled switch cabinet
BS EN IEC 60947-1 Low-voltage switchgear and controlgear - Part 1: General rules
BS EN IEC 61439-2:2021/prAA Low-voltage switchgear and controlgear assemblies - Part 2. Power switchgear and controlgear assemblies
BS EN IEC 61439-1:2021/prAA Low-voltage switchgear and controlgear assemblies - Part 1. General rules
Low-voltage switchgear and controlgear assemblies - Assemblies for specific applications such as marinas, camping sites, market squares, electric vehicle charging stations
本文件规定了城市照明智能配电柜(以下简称“配电柜”)的环境条件与产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于额定工作电压220 V/380 V、频率50 Hz、绝缘电压690 V、主母线额定电流不超过400 A的配电柜。
Intelligent distribution cabinet for urban lighting
本标准规定了家用和类似用途电子开关的正常使用条件、安全要求、尺寸及外观、待机功率、工作功率、电磁兼容、使用寿命、高低温启动、宽电压试验要求、过载试验要求、灵敏度要求、防护等级、调光范围、调速范围、延时开关、跌落试验要求等技术内容。
Technical conditions for household electronic switches
本标准规定了家用和类似用途智能电子开关产品的产品分类、外观、接口、外壳防护等级、功能要求、性能要求、电源适应性要求、环境适应性要求、跌落试验要求、电磁兼容性要求、安全性要求等技术内容。
Technical conditions for household intelligent electronic switches
Low-voltage switchgear and controlgear assemblies - Part 4: Particular requirements for assemblies for construction sites (ACS)
本文件规定了低压抽出式开关柜的运行环境条件、技术指标、结构、性能和试验等方面的技术要求及供货范围。 本文件适用于低压抽出式开关柜技术规范。
Technical specifications for low-voltage withdrawable switchgear
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号