29.130.20 低压开关装置和控制器 标准查询与下载

T/QGCML 1528-2023 智能综合低压配电柜

本文件规定了智能综合低压配电柜的术语和定义、使用条件、额定值、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于固定安装在户内正常使用条件下，额定电压不超过660 V，交流频率为50 Hz的智能综合低压配电柜（以下简称配电柜）。

Intelligent integrated low-voltage distribution cabinet

23/30466102 DC BS EN IEC 61439-6 低压开关设备和控制设备组件 第6部分：母线槽系统（母线槽）

BS EN IEC 61439-6 Low-voltage switchgear and controlgear assemblies - Part 6. Busbar trunking systems (busways)

23/30471813 DC BS EN IEC 62683-2-3 用于信息交换的产品数据和属性 工程数据 第2-3部分 功能安全性和可靠性

BS EN IEC 62683-2-3. Product data and properties for information exchange. Engineering data - Part 2-3. Functional safety and reliability

23/30478752 DC BS EN IEC 60947-5-3 低压开关设备和控制设备 第5-3部分 控制电路装置和开关元件 对故障条件下具有定义行为的接近设备的要求 (PDDB)

BS EN IEC 60947-5-3. Low-voltage switchgear and controlgear - Part 5-3. Control circuit devices and switching elements. Requirements for proximity devices with defined behaviour under fault conditions (PDDB)

23/30470523 DC BS EN IEC 61439-8 低压开关设备和控制设备组件 第8部分：光伏装置中使用的组件

BS EN IEC 61439-8. Low-voltage switchgear and controlgear assemblies - Part 8. Assemblies for use in photovoltaic installations

CSA C22.2 No.31-2023 开关设备组件

1 Scope 1.1 This Standard applies to deadfront indoor enclosed and outdoor enclosed assemblies of switchgear devices such as a) switches; b) interrupting devices; c) air circuit breakers; d) power circuit breakers; and e) control, metering, protective, and regulating equipment with associated interconnections and supporting structures. 1.2 This Standard covers equipment with a nominal voltage of 46 kV or less that is intended to be used a) in accordance with the Canadian Electrical Code, Part I; b) in non-hazardous locations; c) for controlling and protecting the power from generators or other sources; and d) for supplying electrical energy to power and lighting circuits. 1.3 This Standard does not apply to a) switchboards for power distribution (see CSA C22.2 No. 244); b) switchboards for communication circuits; c) panelboards (see CSA C22.2 No. 29); d) industrial control equipment (see CSA C22.2 No. 14); e) low-voltage assemblies consisting of separately supported enclosed switches; f) enclosed circuit breakers (see CSA C22.2 No. 5); g) service meters with interconnection between them enclosed in raceways; and h) individual low-voltage switchgear and controlgear switching devices such as contactors or proximity switches (see CSA C22.2 No. 60947 series and Note 2 below). Notes: 1) Manufacturers and installers of switchgear assemblies approved under this Standard should take due note of the Canadian Electrical Code, Part I, with respect to the location of switchgear devices in areas where certain components might not be acceptable. 2) The terms “switchgear” and “switchgear assemblies” used within the content of this Standard refer to assemblies primarily intended to provide protection and control of either low- or high-voltage feeder and sub- feeder circuits in connection with the generation, transmission, distribution, and conversion of electric power. These terms should not be confused with the IEC terms “switchgear” and “controlgear” used within the context of the CSA C22.2 No. 60947 series of standards which cover individual or combinations of individual low-voltage switching devices intended for the control, measurement, or regulation of energy-consuming equipment. 1.4 Clauses 2to 6apply to all switchgear assemblies and are supplemented and amended by a) Clause 7for low-voltage switchgear assemblies; and b) Clause 8for high-voltage switchgear assemblies. Note: See Annex Ffor additional requirements applicable for pressurized gas insulated switchgear. 1.5 In this Standard, “shall” is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; “should” is used to express a recommendation or that which is advised but not required; and “may” is used to express an option or that which is permissible within the limits of the standard. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (nonmandatory) to define their application.

Switchgear assemblies

23/30474922 DC BS EN IEC 60947-4-2 AMD 1. 低压开关设备和控制设备 第 4-2 部分 接触器和电机启动器 半导体电机控制器、启动器和软启动器

BS EN IEC 60947-4-2 AMD 1. Low-voltage switchgear and controlgear - Part 4-2. Contactors and motor-starters. Semiconductor motor controllers, starters and soft-starters

T/ZFA 8-2023 智能家居用线性驱动器

本文件规定了智能家居用线性驱动器的术语和定义、基本要求、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于电动沙发、电动床等智能家居配套使用的线性驱动器。

Linear actuator for intelligent home

23/30473799 DC BS EN IEC 60947-7-1 低压开关设备和控制设备 第 7-1 部分 附属设备 铜导体接线端子

BS EN IEC 60947-7-1. Low-voltage switchgear and controlgear - Part 7-1. Ancillary equipment. Terminal blocks for copper conductors

IEC 61439-5:2023 RLV 低压开关设备和控制设备组件.第5部分:公共网络配电组件

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

IEC 61439-5:2023 低压开关设备和控制设备组件.第5部分:公共网络配电组件

Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks

BS EN IEC 60947-8:2023 低压开关设备和控制设备 用于旋转电机内置热保护(PTC)的控制单元

1   Scope This part of IEC 60947 series specifies requirements for control units , which control a switching device in response to the PTC thermistors incorporated in rotating electrical machines and the industrial application. It specifies requirements for that type of system comprising a positive temperature coefficient ( PTC ) thermistor having particular characteristics, and its associated control unit . This document includes: – the characteristics, construction, performance and tests of the control unit ; and – its association with a PTC thermistor designated “Mark A”. This document does not cover: – the incorporation of thermal protections into rotating machines and their maximum winding temperature. See IEC 60034‑11; – use of the product within explosive atmospheres (see IEC 60079 (all parts)); – software and firmware requirements; NOTE 1 ...

Low-voltage switchgear and controlgear. Control units for built-in thermal protection (PTC) for rotating electrical machines

T/QGCML 752-2023 低压固定式开关柜

本文件规定了低压固定式开关柜的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于低压固定式开关柜的设计、制造和检验。

Low voltage fixed switchgear

BS EN IEC 60947-4-2:2023 低压开关设备和控制设备 接触器和电机启动器 半导体电机控制器、启动器和软启动器

1   Scope This part of IEC 60947 applies to semiconductor motor controllers , starters and soft-starters which can include a series mechanical switching device, intended to be connected to circuits the rated voltage of which does not exceed 1 000 V AC. This document characterizes semiconductor motor controllers and starters with and without bypass means. This document does not apply to: – semiconductor motor controllers and starters used for continuous operation of AC motors at motor speeds other than the normal speed1; – electromechanical contactors and external overload relays (see IEC 60947‑4‑1); – short-circuit protective device associated with semiconductor motor controllers and starters (see IEC 60947‑4‑1 (MPSD), IEC 60947‑2 and IEC 60947‑3); – semiconductor equipment, including semiconductor contactors (3.4.13 of IEC 60947‑1:2020) controlling non-motor loads (see IEC 60947‑4‑3); – semiconductor motor controllers and starters used for rotor circuits 1 ;

Low-voltage switchgear and controlgear - Contactors and motor-starters. Semiconductor motor controllers, starters and soft-starter

T/CEEIA 662-2023 低压电器产品绿色包装技术规范

本文件规定了低压电器产品绿色包装的评价原则和方法、评价指标、包装性能及报告格式要求。 本文件适用于低压电器产品及单独销售的产品组件的初始包装、配送包装以及运输包装绿色包装的评价。

Technical specification for green packaging of low voltage electrical apparatus

IEC 62208:2023 低压开关设备和控制设备组件的空外壳 一般要求

Empty enclosures for low-voltage switchgear and controlgear assemblies - General requirements

EN IEC 60947-4-2:2023 低压开关设备和控制设备 第 4-2 部分：接触器和电机启动器 半导体电机控制器、启动器和软启动器

IEC 60947-4-2:2020 applies to semiconductor motor controllers, starters and soft-starters which can include a series mechanical switching device, intended to be connected to circuits the rated voltage of which does not exceed 1 000 V AC. This fourth edition cancels and replaces the third edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - scope exclusions; - editorial correction of notes and hanging paragraphs; - reference to IEC 62683-1; - safety aspects related to: - general aspects; - limited energy circuits; - electronic circuits; - mention of dedicated wiring accessories; - power consumption measurement; - alignment to IEC 60947-1:2020.

Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - Semiconductor motor controllers, starters and soft-starters

T/STIC 110084-2023 园区智慧用能一体化管控系统

本标准规定了本文件适用于园区智慧用能一体化管控系统的定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于园区智慧用能一体化管控系统的设计、生产、检验与验收。

Intelligent and Integrated Energy Systems of the Park

T/CAS ES292102001-2022 工业品质量分级评价规则 1 kV以下低压开关柜

1　范围 本文件规定了1 kV以下低压开关柜质量分级的评价程序和要求、评价方法、质量分级等内容。 本文件适用于额定电压1 kV以下低压开关柜（额定电压交流不超过1000 V或直流1500 V的成套设备，这些产品可以应用在打算与发电、输电、配电和电能转换的设备以及控制电能消化的设备所配套使用的成套设备）质量分级评价活动。 2　规范性引用文件 下列文件中的内容通过文中的规范性引用而构成本文件必不可少的条款。其中，注日期的引用文件，仅该日期对应的版本适用于本文件；不注日期的引用文件，其最新版本（包括所有的修改单）适用于本文件。  GB/T 7251.1—2013  低压成套开关设备和控制设备 第1部分：总则 GB/T 7251.12—2013  低压成套开关设备和控制设备 第2部分：成套电力开关和控制设备 T/CAS ES000000001—2022（V01） 工业品质量分级评价规则 通则

Rules for quality grading and evaluating of industrial products—Low-voltage switchgear assemblies under 1 kV

22/30465746 DC BS IEC 62683-1 低压开关设备和控制设备 用于信息交换的产品数据和属性 第 1 部分：目录数据

BS IEC 62683-1. Low-voltage switchgear and controlgear. Product data and properties for information exchange - Part 1. Catalogue data