29.140.10 灯头和灯座 标准查询与下载
共找到 1032 条与 灯头和灯座 相关的标准，共 69 页
This document adds a new Annex E for DIN EN 60400 (VDE 0616-3). This annex E gives guidance for control gear, which is connected to the 250 V mains but generate an output voltage of more than 250 V.
Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017 + A1:2020); German version EN 60400:2017 + A1:2021
- ICS
- 29.140.10
- CCS
- 发布
- 2021-10-00
- 实施
- 2021-10-01
Lampholders for tubular fluorescent lamps and starterholders
- ICS
- 29.140.10
- CCS
- 发布
- 2021-09-29
- 实施
- 2021-09-29
BS EN 60061. Lamp caps and holders together with gauges for the control of interchangeability and safety. Proposal to add GJ6.6 fit systems to IEC 60061
- ICS
- 29.140.10
- CCS
- 发布
- 2021-09-08
- 实施
- 2021-09-08
本文件规定了E27免焊螺口式灯头的术语和定义、产品结构、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存以及质量承诺。 本文件适用于灯头工作温度不超过130 ℃的成品灯上采用的E27免焊螺口式灯头（以下简称“灯头”）。
E27 Solder-free screw caps
- ICS
- 29.140.10
- CCS
- C387
- 发布
- 2021-08-20
- 实施
- 2021-08-27
Miscellaneous lampholders - Part 1: General requirements and tests
- ICS
- 29.140.10
- CCS
- 发布
- 2021-08-09
- 实施
- 2021-08-09
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps
- ICS
- 29.140.10
- CCS
- 发布
- 2021-08-06
- 实施
- 2021-08-06
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
- ICS
- 29.140.10
- CCS
- 发布
- 2021-08-06
- 实施
- 2021-08-06
Lamp caps and holders together with gauges for the control of interchangeability and safety - Revision of 7004-21A-3 for E26, 7004-24A-2 for E39 and 7004-26-3 for E17 (IEC 34B/2113/CDV) (english version)
- ICS
- 29.140.10
- CCS
- 发布
- 2021-08-01
- 实施
- 2021-08-01
Miscellaneous lampholders - Part 1: General requirements and tests
- ICS
- 29.140.10
- CCS
- 发布
- 2021-07-30
- 实施
- 2021-07-30
Lampholders for tubular fluorescent lamps and starterholders (IEC 60400:2017/A1:2020)
- ICS
- 29.140.10
- CCS
- 发布
- 2021-07-15
- 实施
- 2021-07-15
IEC 62931:2017 This document specifies the safety and interchangeability requirements together with the test methods and conditions required to show compliance of non-integrated tubular LED lamps, intended for general lighting purposes, having: a rated wattage up to 70 W, a rated voltage up to 190 V ripple free DC, GX16t-5 cap as listed in Table 1. The requirements of this document relate only to type testing.
GX16t-5 capped tubular LED lamp - Safety specifications
- ICS
- 29.140.10
- CCS
- 发布
- 2021-07-01
- 实施
Miscellaneous lampholders - General requirements and tests
- ICS
- 29.140.10
- CCS
- 发布
- 2021-06-30
- 实施
- 2021-06-30
Miscellaneous lampholders - Part 1: General requirements and tests (IEC 60838-1:2016/A2:2020)
- ICS
- 29.140.10
- CCS
- 发布
- 2021-06-15
- 实施
- 2021-06-15
Lampholders for tubular fluorescent lamps and starterholders
- ICS
- 29.140.10
- CCS
- 发布
- 2021-05-31
- 实施
- 2021-05-31
Miscellaneous lampholders – Part 1: General requirements and tests
- ICS
- 29.140.10
- CCS
- 发布
- 2021-05-27
- 实施
- 2021-05-27
Lampholders for tubular fluorescent lamps and starterholders
- ICS
- 29.140.10
- CCS
- 发布
- 2021-05-12
- 实施
- 2021-05-12
Lampholders for tubular fluorescent lamps and starterholders
- ICS
- 29.140.10
- CCS
- 发布
- 2021-05-07
- 实施
- 2021-08-07
1 Scope This part of IEC 60838 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in Annex A) and the methods of test to be used in determining the safe use of lamps in lampholders. This part of IEC 60838 also covers lampholders which are integral with a luminaire. It covers the requirements for the lampholder only. This part of IEC 60838 also covers lampholders integrated in an outer shell and dome similar to Edison screw lampholders. Such lampholders are further tested in accordance with the relevant clauses of IEC 60238. Requirements for lampholders for tubular fluorescent lamps, Edison screw lampholders and bayonet lampholders are covered by separate standards.
Miscellaneous lampholders - General requirements and tests
- ICS
- 29.140.10
- CCS
- 发布
- 2021-04-30
- 实施
- 2021-04-30
This standard contains Amendment 57 and 58 to IEC 60061-3, which covers the following standard sheets respectively systems: 7006-11 - B15, B22 7006-11B - BA15-3(110°), bAU15, BAU15-3(110°), BAW15, BAW15-3(110°), BA-15, BAY15-3(110°), BAZ15, BAZ15-3(110°) 7006-11C - BAZ15 7006-11D
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges (IEC 60061-3:1969 + supplements A:1970 to U:1997 + A20:1998 to A57:2020 + A58:2020, modified); German version EN 60061-3:1993 + A1:1995 to A7:1997
- ICS
- 29.140.10
- CCS
- K74
- 发布
- 2021-04-00
- 实施
Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders (IEC 60061-2:1969/A57:2020)
- ICS
- 29.140.10
- CCS
- 发布
- 2021-03-31
- 实施
- 2021-03-31
