29.140.50 照明安装系统 标准查询与下载
共找到 144 条与 照明安装系统 相关的标准，共 10 页
Electrical installations for beaconing of aerodromes and heliports - Design, construction and verification (german version)
- ICS
- 29.140.50
- CCS
- 发布
- 2021-08-01
- 实施
- 2021-08-01
IEC 62386-301:2017 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC supplies. This document is only applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:— input devices that make the lighting control system sensitive to push button operations.
Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons
- ICS
- 29.140.50
- CCS
- 发布
- 2021-07-01
- 实施
IEC 62386-207:2018 specifies a bus system for control by digital signals of electronic ligthing equipment which is in line with the requirements of IEC 61347 (all parts), with the addition of DC supplies. This second edition cancels and replaces the first edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: fast fade time has been redefined; short circuit and open circuit have been deleted; physical selection has been deleted; dimming curve selection has been moved to a separate part; load increase, load decrease and reference measurement have been moved to a separate part; thermal gear and lamp protection have been moved to separate parts; LED module integrated has been moved to a separate part; link to IEC 62386-102 error bits has been clarified; the following commands have been deleted: ENABLE CURRENT PROTECTOR DISABLE CURRENT PROTECTOR QUERY POSSIBLE OPERATING MODES QUERY SHORT CIRCUIT QUERY OPEN CIRCUIT QUERY CURRENT PROTECTOR ACTIVE QUERY CURRENT PROTECTOR ENABLED QUERY OPERATING MODE
Digital addressable lighting interface - Part 207: Particular requirements for control gear - LED modules (device type 6)
- ICS
- 29.140.50
- CCS
- 发布
- 2021-07-01
- 实施
IEC 62870:2015 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting. The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.
Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
- ICS
- 29.140.50
- CCS
- 发布
- 2021-07-01
- 实施
安全要求、光色电性能、噪声、机械控制、电磁兼容、可靠性
Technical requirements for outdoor performance lighting products
- ICS
- 29.140.50
- CCS
- C387
- 发布
- 2021-06-23
- 实施
- 2021-06-23
Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware Transfer (( IEC 62386-105:2020) EN IEC 62386-105:2020) (german version)
- ICS
- 29.140.50
- CCS
- 发布
- 2021-04-01
- 实施
- 2021-04-01
Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components (IEC 62386-104:2019) (german version)
- ICS
- 29.140.50
- CCS
- 发布
- 2020-12-01
- 实施
- 2020-12-01
本标准规定了以LED为光源、电源电压不超过250 V的一般照明用LED筒灯的术语与定义、基本要求、技术要求、试验方法、检验规则、标志、运输和贮存、质量承诺。 本标准适用于LED嵌入式筒灯，不包括使用一体化LED灯的筒灯。
LED downlights 2020
- ICS
- 29.140.50
- CCS
- C387
- 发布
- 2020-11-16
- 实施
- 2020-11-29
Electrical installations for aeronautical ground lighting at aerodromes - Part 1: Fundamental principles ((IEC 61820-1:2019) EN IEC 61820-1:2019) (german version)
- ICS
- 29.140.50
- CCS
- 发布
- 2020-11-01
- 实施
- 2020-11-01
IEC 63067:2020 applies to plugs and receptacles for single or multiple pole connecting devices used for aeronautical ground lighting applications. Additional requirements and usage of connecting devices are given in different parts of IEC 61820 series. Connecting devices complying with this document are suitable for use in environmental class E11 according to IEC 61820-1.
Electrical installations for lighting and beaconing of aerodromes - Connecting devices - General requirements and tests
- ICS
- 29.140.50
- CCS
- 发布
- 2020-08-21
- 实施
- 2020-10-29 (7)
IEC 62386-105:2020 applies to control gear and control devices. Typically, a bus unit according to IEC 62386 (all parts) contains firmware. There are circumstances where it might be necessary to change the firmware after production or shipping of the product. For example if the bus unit does not operate as intended. In such a case, a firmware update of a bus unit via the interface is beneficial. This firmware update process is primarily designed to be a bug fix process, not a feature extension process. Nevertheless the firmware update process can be used for feature extensions. But it is important that the risk of negative effects to the complete system is considered in detail.
Digital addressable lighting interface - Part 105: Particular requirements for control gear and control devices - Firmware Transfer
- ICS
- 29.140.50
- CCS
- 发布
- 2020-05-22
- 实施
- 2020-07-30 (7)
1 范围 2 规范性引用文件 3 术语和定义 4 分类 4.1 按灯使用的光源类型分类 4.2 按光源能否替换分类 4.3 按灯具的空间光通量分配分类 4.4 按灯具应用的区域分类 4.5 教室的分类 5 教室照明质量要求 5.1 一般要求 5.2 作业面照度和照度均匀度 5.3 书写板面的照度和照度均匀度 5.4 维持照度和维持系数 5.5 眩光 5.6 频闪（效应） 5.7 节能 5.8 照明控制 5.9 灯具的安装 5.10 灯具的维护和运行 5.11 消防应急照明灯具 5.12 间接照明 5.13 多媒体教室及有MDT的教室 5.14 自然光采光要求 6 灯具的技术要求 6.1 一般要求 6.2 相关色温（CCT） 6.3 显色性 6.4 色容差 6.5 眩光 6.6 闪烁 6.7 电特性 6.8 视网膜蓝光危害 6.9 寿命 6.10 控制装置 6.11 标记 6.12 环保 6.13 光源 6.14 书写板灯配光 6.15 消防应急照明灯具 7 照明质量的现场测量 7.1 一般要求 7.2 作业面照度和照度均匀度 7.3 书写板照度和照度均匀度 7.4 颜色特性 7.5 眩光 7.6 采光 7.7 其他技术要求 8 灯具的测量要求 8.1 一般要求 8.2 眩光 8.3 光色电特性 8.4 视网膜蓝光危害 8.5 闪烁 8.6 期望寿命和光通维持率 8.7 控制装置 8.8 标记
Technical Specifications for Classroom Lighting in Primary and Secondary Schools in Jiangsu Province
- ICS
- 29.140.50
- CCS
- C387
- 发布
- 2020-04-30
- 实施
- 2020-07-07
要求 4.1 制造法兰使用的材料应符合设计文件规定，当设计文件无明确规定时应使用性能优于Q235的材料。 4.2 法兰板的厚度应符合设计文件规定。其公差应符合GB/T 709的要求。 4.3 腰形孔的尺寸应符合设计文件规定，其直径公差应不大于±0.5mm。 4.4 腰形孔的转动应为±5°，即旋转角度β不应大于10°。 4.5 法兰板的边长、外径的公差为±3mm，节圆的公差为±1mm 4.6 腰形孔壁的粗糙度应为，法兰板外周壁的粗糙度应为。 4.7 法兰板的平面度公差应不大于1.0mm。 法兰板外观应清洁，无明显锈蚀，无明显锐边毛刺
Light pole flange plate
- ICS
- 29.140.50
- CCS
- C387
- 发布
- 2019-12-15
- 实施
- 2020-01-16
IEC 61820-1:2019 covers principles of design and installation requirements for AGL systems including control, monitoring and transformation of energy, the cables and any electrical component utilized to produce the light intended to be used as a visual aid for air and ground navigation. This document defines in general the fundamental principles to provide safe, reliable and efficient operation of AGL systems independent of the particular system design. Where certain aspects of design are specific to a particular type of system (e.g. series-circuit), these are supplemented in the applicable part.
Electrical installations for aeronautical ground lighting at aerodromes - Part 1: Fundamental principles
- ICS
- 29.140.50
- CCS
- 发布
- 2019-07-05
- 实施
- 2019-09-06 (7)
本标准规定了中小学校LED教室照明产品技术要求、光环境设计及评价要求、光环境测试方法。 本标准适用于新建、改建和扩建的中小学校应用LED照明灯具产品的教室光环境设计及测试评价，包括普通教室、美术教室、计算机教室、图书室、电子阅览室、舞蹈教室、音乐教室、自然教室、劳动技术教室、科技活动室、办公室、会议室、实验（专用）室等。
Design and Evaluation Standard for School Lighting Environment
- ICS
- 29.140.50
- CCS
- D4420
- 发布
- 2019-06-20
- 实施
- 2019-07-11
范围 规范性引用文件 术语和定义 要求 检验方法 标志、包装、运输和贮存 安装 本标准规定了离网供电太阳能LED路灯灯杆的定义、分类、技术要求、检验方法及标志、包装、运输、储存和安装的要求。 本标准不适用于除钢材料外其他材质的灯杆或支撑体。
Off-grid power supply solar LED street lighting technical specification Part 2: Light pole and installation technical specifications
- ICS
- 29.140.50
- CCS
- C387
- 发布
- 2019-01-05
- 实施
- 2021-06-07
本标准规定了术语和定义、概述 、电气规范、接口电源、传输协议结构、定时、操作方法、 变量的声明、命令的定义和测试程序等。
Digital addressable lighting interface-Part 103: General requirements-Control devices
- ICS
- 29.140.50
- CCS
- C387
- 发布
- 2017-10-16
- 实施
- 2017-10-16
Technical requirements for road intelligent lighting system
- ICS
- 29.140.50
- CCS
- K 70
- 发布
- 2017-09-30
- 实施
- 2017-12-30
IEC 62386-303:2017 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC supplies. This document is only applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—; input devices that deliver occupancy information to the lighting control system through movement or presence sensing.
Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor
- ICS
- 29.140.50
- CCS
- 发布
- 2017-09-15
- 实施
- 2017-09-23 (7)
IEC 62386-301:2017 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC supplies. This document is only applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—; input devices that make the lighting control system sensitive to push button operations.
Digital addressable lighting interface - Part 301: Particular requirements - Input devices - Push buttons
- ICS
- 29.140.50
- CCS
- 发布
- 2017-09-15
- 实施
- 2017-09-23 (7)
