29.140.50 照明安装系统 标准查询与下载
共找到 144 条与 照明安装系统 相关的标准，共 10 页
IEC 62386-304:2017 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC supplies. This document is only applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—; input devices that deliver illuminance level information to the lighting control system through light level sensing.
Digital addressable lighting interface - Part 304: Particular requirements - Input devices - Light sensor
- ICS
- 29.140.50
- CCS
- 发布
- 2017-09-15
- 实施
- 2017-09-23 (7)
IEC 62386-303:2017 specifies a bus system for control by digital signals of electronic lighting equipment which is in line with the requirements of IEC 61347, with the addition of DC supplies. This document is only applicable to IEC 62386-103:2014 and IEC 62386-103:2014/AMD1:—; input devices that deliver occupancy information to the lighting control system through movement or presence sensing.
Digital addressable lighting interface - Part 303: Particular requirements - Input devices - Occupancy sensor
- ICS
- 29.140.50
- CCS
- 发布
- 2017-09-15
- 实施
- 2017-09-23 (7)
本规范规定了乡村户外太阳能光伏照明设施安装规范的术语和定义、总则、基础的施工、安装前的准备、照度指标、安装及安全措施要求、现场检测。
Installation specification for outdoor solar photovoltaic lighting facilities in rural areas
- ICS
- 29.140.50
- CCS
- C3872
- 发布
- 2017-05-20
- 实施
- 2017-05-22
本规范规定了乡村户外太阳能光伏照明设施的术语和定义、总则、验收项目、验收的方法、验收报告的签署等。
Acceptance specification for outdoor solar photovoltaic lighting facilities in rural areas
- ICS
- 29.140.50
- CCS
- N781
- 发布
- 2017-05-20
- 实施
- 2017-05-22
3.1 照明系统 lighting system 由照明控制装置及控制软件、灯具、光源等设备（或产品）构成，以实现特定区域照明功能的系统。 3.2 应用效果 Application effect 满足照明需求，且各项技术指标符合相关标准的要求。 3.3 道路/隧道照明灯具 luminaire for road/ tunnel lighting 为满足道路/隧道照明要求,由光源以及光学、机械、电气和电子等部件组合成一个整体的照明装置（以下简称：灯具）。包括安装为除 LED 外的其他电光源。 4.1.3.4截光型灯具的眩光指数 I80 宜小于或等于 30cd/1000lm，I90 宜小于或等于 10cd/1000lm。 4.1.3.5灯具点燃 3000h 后，色品坐标与初始值偏差（?uv）不宜大于 0.0100。 4.1.4 热性能要求 4.1.4.1用于寒冷地区的灯具应按 GB/T 2423.1 进行低温环境试验，灯具应在-40℃环境下正常工作。 4.1.4.2用于炎热地区的灯具应按 GB/T 2(lx) UE TI(%) （最小 （维持值） （最小值） （最小值） (维持率) （最小值） 最大初始值 值） 主干道 1 级 2.0 0.46 0.7 30 0.4 10 0.5 2 级 2.0 0.46 0.7 30 0.4 10 0.5 3 级 1.5 0.4 0.7 20 0.4 10 0.5 次干道 1 级 1.0 0.4 0.5 25 0.4 10 0. (条) (lx) LED 其他 LED 其他 LED 其他 ≥6 0.63 0.76 0.74 0.89 0.9 1.00 30 快速路 ＜6 0.75 0.9 0.88 1.06 1.05 1.20 ≥6 0.42 0.5 0.49 0.59 0（m·cd） 1 入口段 1 0.0290 0.0310 2 入口段 2 0.0335 0.0280 3 过渡段 1 0.0375 0.0410 4 过渡段 2 0.0820 0.0670 4.4 照明系统节能量评估 4.4.1 照明系统的节能量计算 照明系统的节能量应按 GB/T 31348 的要求进行计算。 4.4.2 新建项目照明系统基期能耗的确定 对于新建项目，在照明效果符合相应标准的状态下，以光效为 90lm/W 的高 √ - 4.1.6.6 √ √ √ 4.1.6.7 1 级 2 级 3 级 4.1.6.8 √ √ √ 续表 8 照明系统评价等级评判事项表 评价事项 评价等级 评估项目 评估项 符合条款 1 级 2 级 3 级 4.
Application Effect and Energy Efficiency Evaluation of Lighting System (Road/Tunnel)
- ICS
- 29.140.50
- CCS
- C3879
- 发布
- 2016-11-16
- 实施
- 2018-08-16
IEC 60598-2-2:2011 specifies requirements for recessed luminaires incorporating electric light sources for operation from supply voltages up to 1 000 V. This section does not apply to air-handling or liquid-cooled luminaires. This third edition cancels and replaces the second edition published in 1996 and its Amendment 1 (1997), of which is constitutes a technical revision. The changes introduced by this new edition are those required to maintain consistency later versions of IEC 60598-1 that have been published since the previous edition of this standard.
Luminaires - Part 2-2: Particular requirements- Recessed luminaires
- ICS
- 29.140.50
- CCS
- 发布
- 2016-09-27
- 实施
IEC 62870:2015 specifies protective provisions for the operation of lamp systems powered by series circuits in aeronautical ground lighting. The protective provisions described here refer only to secondary supply systems for loads that are electrically separated from the series circuit.
Electrical installations for lighting and beaconing of aerodromes - Safety secondary circuits in series circuits - General safety requirements
- ICS
- 29.140.50
- CCS
- 发布
- 2015-12-18
- 实施
- 2016-01-21 (7)
This International Standard specifies a protocol and test methods for the control by digital signals of electronic control gear that switches its output only on and off.
Digital addressable lighting interface - Part 208: Particular requirements for control gear - Switching function (device type 7)
- ICS
- 29.140.50
- CCS
- 发布
- 2015-09-03
- 实施
This International Standard specifies the basic performance and safety requirements for individual products and components that are incorporated into automatic test systems for use with emergency lighting systems on supply voltages not exceeding 1 000 V. This standard also specifies the required functionality of a complete automatic test system for an emergency lighting system. This standard is applicable to testing systems consisting of a number of emergency lighting self-contained luminaires or a central battery with associated emergency lighting luminaires. NOTE Manual test facilities that rely on manual initiation and/or visual inspection of the lamp condition are outside the scope of this standard.
Automatic test systems for battery powered emergency escape lighting
- ICS
- 29.140.50
- CCS
- 发布
- 2015-09-03
- 实施
The particular requirements of this part of IEC 60364 apply to the selection and erection of extra-low-voltage lighting installations supplied from sources with a maximum rated voltage of 50 V a.c. or 120 V d.c. NOTE 1 For the definition of an extra-low-voltage lighting system see IEC 60598-2-23. NOTE 2 AC voltages are given as r.m.s. values.
Low-voltage electrical installations - Part 7-715: Requirements for special installations or locations - Extra-low-voltage lighting installations
- ICS
- 29.140.50
- CCS
- 发布
- 2015-09-03
- 实施
IEC 62386-201:2015(E) is available as IEC 62386-201:2015 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 62386-201:2015(E) specifies a bus system for control by digital signals of electronic lighting equipment. This electronic lighting equipment should be in line with the requirements of IEC 61347. This document is applicable to control gear associated with fluorescent lamps. This second edition cancels and replaces the first edition published in 2009 and constitutes a technical revision. The essential changes with respect to the first edition are: - references to subclauses in IEC 62386-101 and IEC 62386-102 updated to the new structure of the standard; - test sequence reworked and description of the test sequences in form of a pseudo code instead of flow charts.
Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0)
- ICS
- 29.140.50
- CCS
- 发布
- 2015-07-24
- 实施
- 2015-10-01 (7)
Powertrack systems - Part 1: General requirements (IEC 61534-1:2011 + A1:2014); German version EN 61534-1:2011 + A1:2014
- ICS
- 29.140.50
- CCS
- P91
- 发布
- 2015-03
- 实施
Powertrack systems - Part 22: Particular requirements for powertrack systems intended for onfloor or underfloor installation (IEC 61534-22:2014); German version EN 61534-22:2014
- ICS
- 29.140.50
- CCS
- P91
- 发布
- 2015-03
- 实施
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting (IEC 61534-21:2014); German version EN 61534-21:2014
- ICS
- 29.140.50
- CCS
- P91
- 发布
- 2015-03
- 实施
This International Standard specifies the requirements for a Constant Current Regulator (CCR) having a nominal output of 6,6 A for use in an aeronautical ground lighting constant current series circuit. However, CCRs may be manufactured which have a different power rating (kVA) and current steps than those specified in this standard in order to be used on existing circuits. This standard should be applied where appropriate for these CCRs.
Electrical installations for lighting and beaconing of aerodromes - Constant current regulators
- ICS
- 29.140.50
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard applies to the maintenance of AGL constant current series circuits. This International Standard • covers constant current series circuits for AGL installed at aerodromes and heliports; • concentrates on providing the safety requirements for the maintenance of an AGL constant current series circuit. It is recognized that AGL constant current series circuits of different design characteristics and parameters are in existence; • is mainly concerned with safety to persons by specifying the rules and fundamental principles for the maintenance of AGL constant current series circuits; • is not intended to apply to AGL primary series circuits supplied directly from a mains constant voltage source; • is not intended to be used for public street lighting, roadway lighting or any other installation requiring the use of constant current series circuits.
Electrical installations for lighting and beaconing of aerodromes - Maintenance of aeronautical ground lighting constant current series circuits
- ICS
- 29.140.50
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard specifies a protocol and test procedures for the control by digital signals of electronic control gear that can change their light colour. NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are not included.
Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8)
- ICS
- 29.140.50
- CCS
- 发布
- 2014-12-25
- 实施
This standard specifies the characteristics of aeronautical ground lighting series transformers (AGLST) used in aeronautical ground lighting for 6,6 A series circuits, at a service voltage of up to 5 kV, supplied by constant current regulators up to 30 kVA in rating. AGL series transformers provide power to airport lighting luminaires or other loads (resistive) from their secondary circuits. The AGL series transformers provide continuity of the series circuit in the event of a loss of the load on the transformer, and electrical isolation between the primary circuit supplied by a constant current regulator, and the secondary circuit connected to the load under conditions defined in this standard. An AGL series transformer is be able to withstand a permanent short or open-circuit secondary series circuit. Specifications for similar series transformers intended for any primary or secondary currents other than 6,6 A, or to supply alternative voltages, constant power, reactive loads, etc., are not included in this standard.
Electrical installations for lighting and beaconing of aerodromes - AGL series transformers
- ICS
- 29.140.50
- CCS
- 发布
- 2014-12-25
- 实施
This Technical Specification defines the requirements and testing procedures for inset and elevated luminaires with lamps used in aeronautical ground lighting systems and excluding luminaires for general lighting. This Technical Specification is applicable to inset or elevated luminaires used for: – approach lights: centreline, crossbars, supplementary approach; – runway lights: runway guard, threshold, threshold wingbar, centreline, edge, touch down zone, runway end, stopway lights; – taxiway lights : centreline, edge, stopbar, intermediate holding position lights; – heliports: aiming point, perimeter, fato luminaires. The purpose of this Technical Specification is to provide a set of requirements and tests, which are applicable to the luminaires and their control equipment. In general, this Technical Specification includes safety requirements for the luminaires. This Technical Specification is not applicable to visual approach slope indicator systems (PAPI (precision approach path indicators) etc.) and signs. Any other equipment not described in this Technical Specification is excluded from its scope.
Electrical installations for lighting and beaconing of aerodromes - Characteristics of inset and elevated luminaires used on aerodromes and heliports
- ICS
- 29.140.50
- CCS
- 发布
- 2014-12-25
- 实施
This International Standard specifies a protocol and test procedures for the control by digital signals of electronic control gear working as automatic sequencers.
Digital addressable lighting interface - Part 210: Particular requirements for control gear - Sequencer (device type 9)
- ICS
- 29.140.50
- CCS
- 发布
- 2014-12-25
- 实施
