共找到 144 条与 照明安装系统 相关的标准,共 10 页
Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting (IEC 61534-21:2006); German version EN 61534-21:2006
This International Standard specifies the basic performance and safety requirements for individual products and components that are incorporated into automatic test systems for use with emergency lighting systems on supply voltages not exceeding 1000 V. This standard also specifies the required functionality of a complete automatic test system for an emergency lighting system. This standard is applicable to testing systems consisting of a number of emergency lighting self-contained luminaires or a central battery with associated emergency lighting luminaires.
Automatic test systems for battery powered emergency escape lighting
1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.
UL Standard for Safety Track Lighting Systems
Powertrack systems - Part 21 : particular requirements for powertrack systems intended for wall and ceiling mounting.
This standard specifies the particular requirements and tests for PT systems intended for mounting on walls and/or ceiling. They may be installed flush or semi-flush, surface mounted, suspended or spaced away from the surface using fixing devices.
Powertrack systems - Particular requirements for powertrack systems intended for wall and ceiling mounting
1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.
UL Standard for Safety Track Lighting Systems Third Edition
This bulletin contains the report of the STP meeting held April 14, 2004 and contains the STP's disposition of the comments from the ballot of UL 1574, bulletin dated December 12, 2003, and proposes substantive changes in requirements based on these comments.
Track Lighting System
Design code for instrument tubing and wiring in petrochemical industry
Electrical supply track systems for luminaires (IEC 60570:2003, modified); German version EN 60570:2003
This standard applies to the following track systems with two or more poles for the connection of luminaires to the electrical supply consisting of, either - a system with a rated voltage not exceeding 440 V between poles (live conductors) with provision for earthing (class I) and a rated current not exceeding 16 A per conductor, or - a SELV system with a rated voltage not exceeding 25 V without provision for earthing (class III) and a rated current not exceeding 25 A per conductor, or - a combination of the two systems mentioned above (mixed supply system) for the connection of both mains voltage luminaires (class I or II) and SELV supplied luminaires (cla
Electrical supply track systems for luminaires
This International Standard applies to the following track systems with two or more poles for the connection of luminaires to the electrical supply consisting of, either - a system with a rated voltage not exceeding 440 V between poles (live conductors) with provision for earthing (class Ⅰ) and a rated current not exceeding 16 A per conductor, or - a SELV system with a rated voltage not exceeding 25 V without provision for earthing (class Ⅲ) and a rated current not exceeding 25 A per conductor, or - a combination of the two systems mentioned above (mixed supply system) for the connection of both mains voltage luminaires (class Ⅰ or Ⅱ) and SELV supplied luminaires (class Ⅲ) simultaneously, but in different sector openings (mains or SELV). The track systems may also provide for the mechanical support of the luminaires. It applies to track systems designed for ordinary interior use for mounting on, or flush with, or suspended from walls and ceilings. These track systems are not intended for locations where special conditions prevail as in ships, vehicles and the like and in hazardous locations, for example, where explosions are liable to occur.
Electrical supply track systems for luminaires
Applies to track systems with two or more poles for the connection of luminaires to the electrical supply consisting of either a system with a rated voltage not exceeding 440 V between poles (live conductors) with provision for earthing (class I) and a r
Electrical supply track systems for luminaires
This standard applies to track systems for ordinary interior use with two or more poles and with provision for earthing (Class 1), with a rated voltage not exceeding 440 V between poles (live conductors), rated frequency not exceeding 60 Hz and a rated c
Electrical supply track systems for luminaires
1.1 These requirements cover track lighting systems intended for permanent connection to sources of supply in commercial or residential ordinary locations in accordance with the National Electrical Code, NFPA 70. The track lighting systems covered by this standard are rated: a) 300 volts or less; b) 150 volts or less to ground; and c) 50 amperes or less. 1.2 Lighting track is intended to be permanently installed and permanently connected to a branch circuit not exceeding 277 volts, nominal to ground, and 50 amperes. 1.3 These requirements cover: a) Track networks consisting of track and connectors; b) Mono-, duo-, and multi-point canopies; c) Incandescent, fluorescent, and High Intensity Discharge (HID) luminaire assemblies intended to be electrically connected to and physically supported by the track in track networks and canopies; d) Mounting means for the track; and e) Accessories. 1.4 These requirements do not cover: a) Busways intended for lighting, receptacles, or other general-purpose adaptors covered by the Standard for Busways, UL 857, and intended for use in accordance with Article 364 of the National Electrical Code, NFPA 70; or b) Track lighting systems for marine use aboard a ship or boat. 1.5 Track lighting systems are not intended for use: a) In wet or damp locations; b) In installations where the track is concealed; c) In hazardous locations; d) Where subject to physical damage; e) Where the track is extended through walls or partitions of building structures; f) Where subject to corrosive vapors; or g) In storage battery rooms. 1.6 A track lighting luminaire assembly that uses a tungsten-halogen lamp, fluorescent lamp, or high-intensity-discharge lamp shall also comply with the applicable requirements from the Standard for Luminaires, UL 1598.
12/12/2003 (100p)
Electrical supply track systems for luminaires - Part 2-1: Mixed supply systems; Classes I and III
Electrical supply track systems for luminaires; Amendment 2
Настоящий стандарт распространяется на шинопроводы с двумя и более полюсами для присоединения светильников к источнику электрического п
Electrical supply track systems for luminaires
Настоящий стандарт распространяется на комбинированные шинопроводы, предназначенные для одновременного присоединения светильников кла
Electrical supply track systems for lum inaires. Part 2. Mixed supply systems. Section 1. Classes I and III
Electrical supply track systems for luminaires; Amendment 1
Modification 1 of NF EN 60570-2-1-1995
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号