29.160.40 发电机组 标准查询与下载
共找到 237 条与 发电机组 相关的标准，共 16 页
Mobile power station product model compilation rules
- ICS
- 29.160.40
- CCS
- K52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
本标准规定了用燃机为原动机的下列类型的一般用途的移动电站（含汽车电站、挂车电站、移动式发电机组）的额定功率、额定电压和额定转速的等级： a. 工频（50Hz）电站（60Hz电站可参考使用）； b. 中频（400Hz）电站； c. 双频（50Hz、400Hz）电站； d. 直流电站（含内燃机组经整流装置供电的类型）； 本标准适用于0.3～1250kW的电站。
Rated power, voltage and rotation rate of mobile generator sets
- ICS
- 29.160.40
- CCS
- K52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
Internal combustion engine power station reliability assessment and evaluation method
- ICS
- 29.160.40
- CCS
- K52
- 发布
- 2020-04-16
- 实施
- 2021-01-01
本标准规定了用内燃机驱动交流工频(50Hz)、中频(400Hz)、双频(50Hz、400Hz)发电机的内燃机电站(含汽车电站、挂车电站、发电机组，以下简称电站)用三相四极插头插座的型式、技术要求、试验方法、检验规则等。 本标准适用于额定电压不高于400V，额定频率为50Hz和400Hz的电站用三相四极插头插座。60Hz电站用插头插座可参照使用。
3 phases 4 wires plug & socket for AC movable power plant
- ICS
- 29.160.40
- CCS
- K52
- 发布
- 2020-04-16
- 实施
- 0000-00-00
本标准规定了家用备用静音燃气发电机组的术语和定义、产品的型号、型式、工作模式及基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装和贮运、质量承诺。 本标准适用于额定功率10 kW及以下的单相家用备用静音燃气发电机组（以下简称“备用机组”）。 本标准中的燃气为液化石油气、天然气中的任意一种或两种。
Home standby silence gas generator
- ICS
- 29.160.40
- CCS
- D4420
- 发布
- 2019-11-27
- 实施
- 2020-01-03
Guidelines for Configuration of Excitation System of Hydrogenerator
- ICS
- 29.160.40
- CCS
- K52
- 发布
- 2019-06-04
- 实施
- 2019-10-01
本标准规定了高原风力发电机组电动变桨系统的正常使用条件、技术要求、系统功能、试验规范、检验规则、标志、标签、使用说明书、包装、运输、储存等。 本标准适用于海拔2000 m以上至5000 m范围内，额定电压为交流不超过1000 V，额定频率为50 Hz或者60 Hz，直流不超过1500 V的高原风力发电机组电动变桨系统（以下简称变桨系统）。
Technical specification for electricpitch system of wind turbine generator systems for plateau
- ICS
- 29.160.40
- CCS
- D4420
- 发布
- 2019-06-03
- 实施
- 2019-07-16
本标准规定了数码变频静音发电机组的术语和定义，型式及参数，基本要求，技术要求，试验方法，检验规则，标志、包装、贮运和质量承诺。 本标准适用于额定功率10 kW及以下的单相数码变频静音发电机组（以下简称“数码机组”）。
Digital inverter silence generator
- ICS
- 29.160.40
- CCS
- C381
- 发布
- 2019-01-11
- 实施
- 2019-03-13
本标准规定了汽油/LPG双燃料发电机组的术语和定义，产品的型号、型式及基本参数，基本要求，技术要求，试验方法，检验规则，标志、包装和贮运，质量承诺。 本标准适用于额定功率10 kW及以下的单相汽油/LPG双燃料发电机组（以下简称为“双燃料机组”）。
Gasoline & LPG dual-fuel generator
- ICS
- 29.160.40
- CCS
- C356
- 发布
- 2018-11-09
- 实施
- 2019-03-04
本标准规定了并网发电机组一次调频运行参数设置的基本要求与技术条件。 本标准适用于并入电网运行的单机容量100MW 及以上燃煤、燃气发电机组和10MW 及以上水力 发电机组。本标准不适用于核电机组。
Technical guidelines for parameter setting of primary frequency regulation operation of generator sets
- ICS
- 29.160.40
- CCS
- D441
- 发布
- 2018-02-28
- 实施
- 2018-08-07
Technical Standards for Primary Frequency Regulation of Generating Sets in Hubei Power Grid
- ICS
- 29.160.40
- CCS
- K52
- 发布
- 2018-01-24
- 实施
- 2018-03-31
Firefighting and fire protection - Portable generator - Part 3: Generating set with inverter <= 2 kVA
- ICS
- 29.160.40
- CCS
- 发布
- 2017-05
- 实施
Firefighting and fire protection - Portable generator - Part 1: Generating set >= 5kVA
- ICS
- 29.160.40
- CCS
- K52;C84
- 发布
- 2016-12
- 实施
Firefighting and fire protection - Portable generator - Part 2: Generating set < 5 kVA
- ICS
- 29.160.40
- CCS
- K52;C84
- 发布
- 2016-12
- 实施
Uninterruptible power systems (UPS) - Part 1: General and safety requirements for UPS (IEC 62040-1:2008 + Corrigendum September 2008 + A1:2013); German version EN 62040-1:2008 + Corrigendum February 2009 + A1:2013, Corrigendum to DIN EN 62040-1 (VDE 0558-
- ICS
- 29.160.40
- CCS
- 发布
- 2016-11
- 实施
1.1 This practice covers the requirements for the effective monitoring of mineral oil and phosphate ester fluid lubricating oils in service auxiliary (non-turbine) equipment used for power generation. Auxiliary equipment covered includes gears, hydraulic systems, diesel engines, pumps, compressors, and electrohydraulic control (EHC) systems. It includes sampling and testing schedules and recommended action steps, as well as information on how oils degrade. NOTE 1—Other types of synthetic lubricants are sometimes used but are not addressed in this practice because they represent only a small fraction of the fluids in use. Users of these fluids should consult the manufacturer to determine recommended monitoring practices. 1.2 This practice does not cover the monitoring of lubricating oil for steam and gas turbines. Rather, it is intended to complement Practice D4378. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment
- ICS
- 29.160.40
- CCS
- 发布
- 2016-10-01
- 实施
General specifications for radar power station cabins
- ICS
- 29.160.40
- CCS
- M58
- 发布
- 2016-01-15
- 实施
- 2016-06-01
本标准规定了风力发电机组涉及电能的相关术语和定义、技术要求、试验检查项目等内容，主要涉及风力发电机和变流器。 本标准适用于并网的双馈风力发电机组，同步风力发电机组和异步风力发电机组。
Electrical energy matching and energy efficiency requirement of wind turbine generator system
- ICS
- 29.160.40
- CCS
- K52
- 发布
- 2014-10-15
- 实施
- 2015-03-01
Uninterruptible power systems (UPS) - Part 4: Environmental aspects - Requirements and reporting (IEC 62040-4:2013); German version EN 62040-4:2013
- ICS
- 29.160.40
- CCS
- K31
- 发布
- 2014-03
- 实施
- 2014-03-01
本标准适用于低温热源双循环发电机组 (以下简称机组)。
Low temperature heat source double cycle generator set
- ICS
- 29.160.40
- CCS
- K 52
- 发布
- 2014-01-28
- 实施
- 2014-02-28
