29.160.40 发电机组 标准查询与下载

GSO ISO 3870:2013 交流发电机组往复式内燃机 第1部分：应用与性能技术

This International Standard recommends the adjustment values which are valid for the most commonly used belts and for conveyors with a maximum length not greater than 300 m, fitted solely with fabric carcass belts. Owing to the wide variety of belt types, and to the number of determining factors in choosing the adjustment, it is not possible to propose general numerical values applicable to all cases. For belts with a fabric carcass whose length exceeds 300 m and belts with a metal carcass of any length, the manufacturer should justify the chosen adjustment.

Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials -- Adjustment of take-up device

KS V 8863-2013 船用发电厂电力管理系统

Power management system for marine generating plants

DIN EN 62040-1:2013 不间断电源系统(UPS).第1部分:UPS的通用要求和安全性要求(IEC 62040-1-2008+2008年9月勘误表+A1-2013).德文版本EN 62040-1-2008+2009年2月勘误表+A1-2013

Uninterruptible power systems (UPS).Part 1: General and safety requirements for UPS (IEC 62040-1:2008 + Corrigendum September 2008 + A1:2013); German version EN 62040-1:2008 + Corrigendum February 2009 + A1:2013

BS EN 62040-4:2013 不间断电源系统 (UPS). 环境方面. 要求和报告

Uninterruptible power systems (UPS). Environmental aspects. Requirements and reporting

NF C53-040-1/A1*NF EN 62040-1/A1:2013 不间断电源系统(UPS). 第1部分: UPS的通用和安全要求

Uninterruptible power systems (UPS) - Part 1: general and safety requirements for UPS

DIN VDE V 0124-100:2013 发电厂的输电网集成.低压.与低压配电网络连接并操作并行的发电机组的试验要求

Grid integration of generator plants - Low-voltage - Test requirements for generator units to be connected to and operated in parallel with low-voltage distribution networks

DIN 14685-2:2013 消防设备.便携式发电机组.第2部分:5 kVA便携式发电机组

Firefighting equipment - Portable generating set - Part 2: Portable generating set 5 kVA

DB34/T 1899-2013 低噪声电站方舱通用规范

本标准规定了低噪声电站方舱的术语和定义、规格型号、要求、试验方法、检验规则、标志、包装、 运输和贮存。 本标准适用于低噪声电站方舱（以下简称电站方舱）的设计和生产。

General specification for low-noise power station shelters

GOST IEC 62040-1-2013 不间断电源系统 (UPS). 第1部分. UPS的通用和安全要求

Uninterruptible power systems (UPS). Part 1. General and safety requirement for UPS

SL 573-2012 灯泡贯流式水轮发电机组运行检修规范

本标准规定了灯泡贯流式水轮发电机组运行维护、事故处理、检修管理、安全及可靠性评价的基本要求，适用于单机容量2MW及以上和转轮直径2.5m及以上的灯泡贯流式水轮发电机组的运行和检修管理。

Specification of operating maintenance for bulb turbine and generator units

DB13/T 1588-2012 自行式焊接工作站

Self-propelled welding workstation

DIN VDE V 0124-100:2012 发电厂的输电网集成.低压.与低压配电网络连接并操作并行的发电机组的试验要求

Grid integration of generator plants - Low-voltage - Test requirements for generator units to be connected to and operated in parallel with low-voltage distribution networks

BS EN 62040-3:2011 非干扰电力系统(UPS).规定性能和试验要求的方法

Uninterruptible power systems (UPS). Method of specifying the performance and test requirements

BS EN 62040-3:2012 非干扰电力系统（UPS） 规定性能和试验要求的方法

Uninterruptible power systems (UPS). Method of specifying the performance and test requirements

NF C53-040-3*NF EN 62040-3:2012 不间断电源系统(UPS).第3部分:规定性能和试验要求的方法

Uninterruptible power systems (UPS) - Part 3 : method of specifying the performance and test requirements.

DL/T 290-2012 电厂辅机用油运行及维护管理导则

本标准规定了发电厂（火电厂、水电厂及核电厂常规岛）各种辅机用油的运行监督与维护管理的基本要求。 本标准适用于发电厂所有辅机用油的维护与管理。

Guide for operation and maintenance of oil used in auxiliary equipment in power plant

ANSI/NFPA 110-2012 应急和备用电源系统标准

1.1 Scope. This standard covers performance requirements for emergency and standby power systems providing an alternate source of electrical power to loads in buildings and facilities in the event that the primary power source fails. 1.1.1 Power systems covered in this standard include power sources, transfer equipment, controls, supervisory equipment, and all related electrical and mechanical auxiliary and accessory equipment needed to supply electrical power to the load terminals of the transfer equipment. 1.1.2 This standard covers installation, maintenance, operation, and testing requirements as they pertain to the performance of the emergency power supply system (EPSS). 1.1.3 This standard does not cover the following: (1) Application of the EPSS (2) Emergency lighting unit equipment (3) Distribution wiring (4) Utility service when such service is permitted as the EPSS (5) Parameters for stored energy devices (6) The equipment of systems that are not classed as Level 1 or Level 2 systems in accordance with Chapter 4 of this standard 1.1.4* This standard does not establish criteria for stored energy systems. 1.1.5 The selection of any of the following is not within the scope of this standard: (1) Specific buildings or facilities, or both, requiring an EPSS (2) Specific loads to be served by the EPSS (3)*Assignment of type, class, or level to any specific load.

Standard for Emergency and Standby Power Systems

ANSI/NFPA 111-2012 储蓄电能应急和备用电源系统

1.1 Scope. 1.1.1* This standard shall cover performance requirements for stored electrical energy systems providing an alternate source of electrical power in buildings and facilities in the event that the normal electrical power source fails. 1.1.2 Systems covered in this standard shall include power sources, transfer equipment, controls, supervisory equipment, and accessory equipment, including integral accessory equipment, needed to supply electrical power to the selected circuits. 1.1.3 This standard shall cover installation, maintenance, operation, and testing requirements as they pertain to the performance of the stored emergency power supply system (SEPSS). 1.1.4 Exclusions. 1.1.4.1 This standard shall not cover the following: (1) Application of the SEPSS (2) Distribution wiring (3) Systems having total outputs less than 500 VA or less than 24 V, or systems less than Class 0.033 (4) Unit equipment (5) Nuclear sources, solar systems, and wind stored-energy systems (6) Uninterruptible power systems (UPS) supplied by an emergency power supply system (EPSS) 1.1.4.2 The following shall not be within the scope of this standard: (1) Specific buildings or facilities, or both, requiring an SEPSS (2) Specific loads to be served by the SEPSS (3) Type, class, or level to be assigned to any specific load (See Section 4.1.)

Standard on Stored Electrical Energy Emergency and Standby Power Systems

DIN EN 62040-3:2011 不间断电源系统(UPS).第3部分:指定性能方法和试验要求(IEC 62040-3-2011).德文版 EN 62040-3-2011

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements (IEC 62040-3:2011); German version EN 62040-3:2011

DIN 14685-1:2011 便携式发电机组 5 kVA

Portable generating set 5 kVA