29.160.40 发电机组 标准查询与下载

IEC 62040-3:2011/COR1:2011 不间断电源(UPS).第3部分:说明性能和测试要求的方法:技术勘误表1

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements; Technical Corrigendum 1

IEC 62040-3:2011 不间断电源系统(UPS).第3部分:规定性能的方法和试验要求

Uninterruptible power systems (UPS) - Part 3: Method of specifying the performance and test requirements

DL/T 843-2010 大型汽轮发电机励磁系统技术条件

本标准规定了大型汽轮发电机交流励磁机励磁系统和自并励静止励磁系统的使用条件、系统性能、部件性能、试验项目和整定原则、技术文件，以及包装、运输和储存等。 本标准适用于200MW及以上汽轮发电机交流励磁机励磁系统和自并励静止励磁系统。200MW以下的汽轮发电机励磁系统可参照执行。 对于自复励励磁系统，除复励单元性能应由供、需双方作出相应的规定外，其他要求可参照本技术条件。

Specification for excitation system for large turbine generators

GOST ISO 8528-4-2011 往复式内燃机驱动的交流发电机组.第4部分:控制装置与开关设备

Reciprocating internal combustion engine driven alternating current generating sets. Part 4. Controlgear and switchgear

GOST ISO 8528-5-2011 往复式内燃机驱动的交流发电机组.第5部分:发电机组

Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets

GOST ISO 8528-6-2011 往复式内燃机驱动的交流发电机组.第6部分:试验方法

Reciprocating internal combustion engine driven alternating current generating sets. Part 6. Test methods

GOST ISO 8528-12-2011 往复式内燃机驱动的交流发电机组.第12部分:安全服务的应急电源

Reciprocating internal combustion engine driven alternating current generating sets. Part 12. Emergency power supply to safety services

GOST ISO 8528-8-2011 往复式内燃机驱动的交流发电机组.第8部分:低功率发电机组技术要求和试验

Reciprocating internal combustion engine driven alternating current generating sets. Part 8. Requirements and tests for low-power generating sets

GOST ISO 8528-3-2011 往复式内燃机驱动的交流发电机组.第3部分:发电机组用交流发电机

Reciprocating internal combustion engine driven alternating current generating sets. Part 3. Alternating current generators for generating sets

ANSI/IEEE 1679:2010 固定应用设施中的新兴储能技术特性描述和评估

This document covers recommended information for an objective evaluation of an emerging energy storage device or system by a potential user for any stationary application. Energy storage technologies are those that provide a means for the reversible storage of electrical energy, i.e. the device receives electrical energy and is able to discharge electrical energy at a later time. The storage medium may be electrochemical (e.g. batteries), kinetic (e.g. flywheels), electrostatic (e.g. electric double-layer capacitors), thermal, or some other medium. Devices recharged by non-electrical means, such as fuel cells, are beyond the scope of this document.

Recommended Practice for the Characterization and Evaluation of Emerging Energy Storage Technologies in Stationary Applications

ANSI/UL 1047-2010 绝缘电力系统设备安全性标准

1. Revisions to Color-Code Requirements for Terminals or Leads to Which Isolated Output Conductors are Intended to be Field Connected and the Insulation on Internal Wires in Accordance with the National Electrical Code.

Standard for Safety for Isolated Power Systems Equipment

AQ/T 1075-2009 煤矿低浓度瓦斯往复式内燃机驱动的交流发电机组通用技术条件

General technical specifications for low-concentration gas reciprocating internal combustion engine-driven alternator units in coal mines

AQ 1075-2009 煤矿低浓度瓦斯往复式内燃机驱动的交流发电机组通用技术条件

本标准规定了以煤矿低浓度瓦斯往复式内燃机为动力配套而成的发电机组的型号命名、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于200kW～2000kW煤矿低浓度瓦斯往复式内燃机驱动的交流工频发电机组。

General technical specifications for low concentration coal mine gas alternating current generating sets driven by reciprocating internal combustion engine

DIN EN 62040-1:2009 非干扰电力系统(UPS) 第1部分:UPS用一般要求和安全要求

Uninterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS (IEC 62040-1:2008 + corrigendum September 2008); German version EN 62040-1:2008 + Corrigendum:2009

BS EN 62040-1:2008+A1:2013 不间断电源系统(UPS).第1部分:UPS一般要求和安全性要求

Uninterruptible power systems (UPS). General and safety requirements for UPS

BS EN 62040-1:2008 不间断电源设备(UPS).UPS设备的一般要求和安全要求

This part of IEC 62040 applies to uninterruptible power systems (UPS) with an electrical energy storage device in the d.c. link. It is used with IEC 60950-1, which is referred to in this standard as "RD" (reference document). NOTE UPS applications generally make use of a chemical battery as the energy storage device. Alternative devices may be suitable, and as such, where “battery” appears in the text of this standard, where applicable, this may be understood as “energy storage device”. When a clause is referred to by the phrase "The definitions or the provisions of item/RD apply", this phrase is intended to mean that the definitions or provisions in that clause of IEC 60950-1 apply, except any which are clearly inapplicable to uninterruptible power systems. National requirements additional to those in IEC 60950-1 apply and are found as notes under relevant clauses of the RD. The primary function of the UPS covered by this standard is to ensure continuity of an alternating power source. The UPS may also serve to improve the quality of the power source by keeping it within specified characteristics. This standard is applicable to UPS which are movable, stationary, fixed or for building-in, for use in low-voltage distribution systems and intended to be installed in any operator accessible area or in restricted access locations as applicable. It specifies requirements to ensure safety for the operator and layman who may come into contact with the equipment and, where specifically stated, for the service person. This standard is intended to ensure the safety of installed UPS, both as a single UPS unit or as a system of interconnected UPS units, subject to installing, operating and maintaining the UPS in the manner prescribed by the manufacturer. This standard does not cover UPS based on rotating machines. Electromagnetic compatibility (EMC) requirements and definitions are given in IEC 62040-2.

Uninterruptible power systems (UPS) - General and safety requirements for UPS

BS EN 62040-1:2009 不间断电源设备（UPS） UPS设备的一般要求和安全要求

Uninterruptible power systems (UPS). General and safety requirements for UPS

NF C53-040-1*NF EN 62040-1:2009 不间断电源(UPS).第1部分:UPS用一般要求和安全要求

Uninterruptible power systems (UPS) - Part 1 : general and safety requirements for UPS.

IEC 62040-1:2008/COR1:2008 不间断电源系统(UPS).第1部分:UPS用一般要求和安全要求.技术勘误1

Uninterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS; Corrigendum 1

STANAG 4134-2008 旋转 28 伏直流发电机组的电气特性

ELECTRICAL CHARACTERISTICS OF ROTATING 28 VOLT DC GENERATING SETS