29.240.99 标准查询与下载

IEC TR 60919-3:2009+AMD1:2016 CSV 高压直流（HVDC）系统的性能 线路换流变流器第3部分 动态条件

Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 3: Dynamic conditions

DL/T 1562-2016 容性设备在线监测装置校准规范

Calibration specification for capacitive equipment on-line monitoring device

DL/T 1515-2016 电子式互感器接口技术规范

本标准规定了电子式互感器接口的技术要求和试验方法等内容。 本标准适用于具有模拟输出或数字输出、频率为15Hz~100Hz的电子式互感器的生产和使用。

Technical specification for electronic instrument transformer interface

DL/T 1529-2016 配电自动化终端设备检测规程

本标准规定了配电自动化终端设备(包括馈线终端、站所终端、配电变压器终端，简称配电终端)实验室检测和现场检测的检测条件、检测方法和检测项目。 本标准适用于电力行业规范配电自动化终端设备的设计、制造、订货、验收、使用等环节。

Inspection code for remote terminal unit equipments of distribution automation

DL/T 1432.3-2016 变电设备在线监测装置检验规范 第3部分：电容型设备及金属氧化物避雷器绝缘在线监测装置

本部分规定了电容型设备及金属氧化物避雷器绝缘在线监测装置的检验项目、检测条件、检验内容及要求和检验结果处理。 本部分适用于电容型设备及金属氧化物避雷器绝缘在线监测装置的型式试验、出厂试验、交接试验和现场试验。

Testing specification for on-line monitoring device of transformation equipment.Part 3: On-line insulation monitoring device of capacitive equipment and metal-oxide surge arrester

DL/T 1561-2016 避雷器监测装置校准规范

Calibration specification for arrester monitoring device

SNI IEC/TR 62511:2016 互连电力系统设计指南

Pedoman untuk desain sistem daya terinterkoneksi

BS EN 62823:2015 晶闸管控制串联电容器 (TCSC) 用晶闸管阀. 电气试验

Thyristor valves for thyristor controlled series capacitors (TCSC). Electrical testing

EN 62823:2015 晶闸管控制串联电容器（TCSC）的晶闸管阀 电气测试

IEC 62823:2015 defines routine and type tests on thyristor valves used in thyristor controlled series capacitor (TCSC) installations for a.c. power transmission. The tests specified in this standard are based on air insulated valves operating in capacitive boost mode or bypass mode.

Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing

DB42/T 1112-2015 电力用户无功补偿典型配置设计导则

Design guidelines for typical configurations of reactive power compensation for power users

GSO IEC/TS 62344:2015 高压直流 (HVDC) 链路接地极站的设计 一般准则

This Technical Specification applies to the design of earth electrode stations for high-voltage direct current (HVDC) links. It is intended to provide necessary guidelines, limits, and precautions to be followed during the design of earth electrodes to ensure safety of personnel and earth electrodes and prevent any significant impact they may exert on d.c. power transmission systems and the surrounding environment.

Design of earth electrode stations for high-voltage direct current (HVDC) links - General guidelines

NB/T 42057-2015 低压静止无功发生器

本标准规定了低压静止无功发生器的相关术语和定义、型号命名与产品分类、使用条件、基本电路及构成、技术要求、试验方法、检验规则以及标志、铭牌、包装、运输与贮存等要求。本标准适用于标称电压1000V(1140V)及以下、频率50Hz的交流电力系统中、用于改善电力功率因数及电能质量的低压静止无功发生器(以下简称发生器，也称低压静止同步补偿装置)。

Low-voltage static var generator

IEC TR 60919-2:2008+AMD1:2015 CSV 高压直流（HVDC）系统的性能 线路换流变流器第2部分 故障和开关

Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

GSO IEC 61954:2014 静态无源功率补偿器 (SVC) 测试晶体管整流器值

This International Standard defines type, production and optional tests on thyristor valves used in thyristor controlled reactors (TCR), thyristor switched reactors (TSR) and thyristor switched capacitors (TSC) forming part of static VAR compensators (SVC) for power system applications. The requirements of the standard apply both to single valve units (one phase) and to multiple valve units (several phases). Clauses 4 to 7 detail the type tests, i.e. tests which are carried out to verify that the valve design meets the requirements specified. Clause 8 covers the production tests, i.e. tests which are carried out to verify proper manufacturing. Clauses 9 and 10 detail optional tests, i.e. tests additional to the type and production tests.

Static var compensators (SVC) - Testing of thyristor valves

GSO IEC/TR 62544:2014 高压直流系统 有源滤波器的应用

This technical report gives general guidance on the subject of active filters for use in highvoltage direct current (HVDC) power transmission. It describes systems where active devices are used primarily to achieve a reduction in harmonics in the d.c. or a.c. systems. This excludes the use of automatically retuned components. The various types of circuit that can be used for active filters are described in the report, along with their principal operational characteristics and typical applications. The overall aim is to provide guidance for purchasers to assist with the task of specifying active filters as part of HVDC converters. Passive filters are specifically excluded from this report.

High-voltage direct current (HVDC) systems - Application of active filters

GSO IEC 62103:2014 用于电力装置的电子设备

This International Standard applies to the use of electronic equipment (EE) in power installations where a uniform technical level with respect to safety and reliability is necessary. This standard also applies to EE which are not covered by a specific product standard. This standard defines the minimum requirements for the design and manufacture of EE connected to low-voltage (not exceeding 1 000 V a.c. or 1 500 V d.c.) mains supplies, for protection against electric shock, for testing and its integration into systems for power installations. This standard does not cover the following applications: Electrical accessories and electrical appliances for household and similar purposes, medical equipment, electric railway equipment, data processing without control on systems and processes, public and private non-industrial telecommunication and radio communication equipment and networks, protection relays, residual-current-operated protective devices, uninterruptible power supplies, lighting equipment and public charging equipment for electrical vehicles.

Electronic equipment for use in power installations

GSO IEC 61243-1:2014 在电压下工作 电压检测器 第1部分：用于 1 kV AC 以上电压的电容型

This part of IEC 61243 is applicable to portable voltage detectors, with or without built-in power sources, to be used on electrical systems for voltages of 1 kV to 765 kV a.c., and frequencies of 50 Hz and/or 60 Hz. This part applies only to voltage detectors of capacitive type used in contact with the part to be tested, as a complete device including its insulating element or as a separate device, adaptable to an insulating stick which, as a separate tool, is not covered by this standard (see 4.4.1 for general design). Other types of voltage detectors are not covered by this part of the standard. Some restrictions on their use are applicable in the case of factory-assembled switchgear and on overhead systems of electrified railways (see Annex B, instructions for use). NOTE Except where otherwise specified, all the voltages defined in this standard refer to values of phase-tophase voltages of three-phase systems. In other systems, the applicable phase-to-phase or phase-to-earth ground voltages should be used to determine the operating voltage.

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

GSO IEC 62310-1:2014 固定转换系统 第1部分：一般要求和安全

IEC 62310 consists of three parts and applies to free standing a.c. static transfer systems (STS) intended to ensure the continuity of power to load by automatically or manually controlled transfer, with or without interruption, from two or several a.c. independent sources. This part of IEC 62310 concerns general and safety requirements. See future IEC 62310-2 for electromagnetic compatibility (EMC) and futureIEC 62310-3 for the method of specifying performance and test requirements. This part of IEC 62310 is intended to reduce the risk of fire, electric shock, or injury to persons from installed equipment subject to installing, operating, and maintaining the equipment in the manner prescribed by the manufacturer. This part of IEC 62310 includes requirements for the switching elements, their control and protective elements, where applicable. This part of IEC 62310 also includes information for the overall integration of the STS and its accessories into the a.c. power distribution system. Components or devices necessary for the operation/control/protection/isolation (e.g. circuitbreakers, fuses, transformers, etc.) of a STS should comply with the requirements of the relevant IEC standards and are not covered by this part of IEC 62310. This standard applies to systems up to 1 000 V (a.c. value) which are intended to be used in single phase or phase-phase or three phase applications. This standard does not apply to: − devices for d.c. source switching; − static transfer system using only electromechanical switching devices intended to be used in emergency power systems with interruption of the supply to the load during transfer. This equipment is covered by IEC 60947-6-1; − the automatic switching devices integrated into UPS covered by IEC 62040 series. NOTE For STS intended to be used in vehicles, onboard ships or aircraft, in tropical countries, for emergency power systems (such as those used for health care facilities, fire fighting, emergency rescue, etc.), or on elevations greater than 1 000 m, different requirements may be necessary.

Static transfer systems (STS) - Part 1: General and safety requirements

GSO IEC/IEEE/PAS 63547:2014 将分布式资源与电力系统互联

This standard establishes criteria and requirements for interconnection of distributed resources (DR) with electric power systems (EPS).

Interconnecting distributed resources with electric power systems

BS PD IEC/TR 62511:2014 互联电力系统的设计指南

Guidelines for the design of interconnected power systems