29.240.99 标准查询与下载

DL/T 365-2010 串联电容器补偿装置控制保护系统现场检验规程

本标准规定了串联电容器补偿装置(简称串补装置)控制保护系统现场检验的项目、要求和方法。本标准适用于220kV-500kV电压等级输电线路串补装置控制保护系统的现场检验,其他电压等级串补装置控制保护系统的现场检验可参照执行。

Field testing code on control and protection system of series capacitor installation

DL/T 359-2010 电蓄冷(热)和热泵系统现场测试规范

本标准规定了应用电蓄冷(热)和热泵技术的集中空气调节(采暖)、生活热水和生产工艺冷(热)供应系统工程中冷(热)源部分能源使用效率和移峰效果的现场测试与分析的相关内容和方法。 本标准适用于民用和工业建筑冷(热)供应工程中冷(热)源部分的现场测试。

Field testing criterion of electric thermal storage and heat pump system

DS/EN 61968-9:2010 电力公司的应用程序集成 配电管理系统接口 第9部分：抄表和控制接口

IEC 61968-9:2009(E) specifies the information content of a set of message types that can be used to support many of the business functions related to meter reading and control. Typical uses of the message types include meter reading, meter control, meter events, customer data synchronization and customer switching. Although intended primarily for electrical distribution networks, IEC 61968-9 can be used for other metering applications, including non-electrical metered quantities necessary to support gas and water networks.

Application integration at electric utilities - System interfaces for distribution management - Part 9: Interface for meter reading and control

DS/EN 61850-6:2010 电力公用事业自动化通信网络和系统 第6部分：与 IED 相关的变电站通信配置描述语言

IEC 61850-6:2009(E) specifies a file format for describing communication-related IED (Intelligent Electronic Device) configurations and IED parameters, communication system configurations, switch yard (function) structures, and the relations between them. The main purpose of this format is to exchange IED capability descriptions, and SA system descriptions between IED engineering tools and the system engineering tool(s) of different manufacturers in a compatible way. The main changes with respect to the previous edition are as follows: - functional extensions added based on changes in other Parts of IEC 61850, especially in IEC 61850-7-2 and IEC 61850-7-3;

Communication networks and systems for power utility automation - Part 6: Configuration description language for communication in electrical substations related to IEDs

DS/CLC/TS 61850-80-1:2010 用于电力公用事业自动化的通信网络和系统 第 80-1 部分：使用 IEC 60870-5-101 或 IEC 60870-5-104 从基于 CDC 的数据模型交换信息的指南

This technical specification gives a guideline on how to exchange information from a CDCbaseddata model (for example IEC 61850) using IEC 60870-5-101 or IEC 60870-5-104 between substation(s) and control center(s). Mostly guidelines for functions needed in a substation gateway device are given.The goal of this technical specification is to describe standardized mapping of device-orienteddata models (for example IEC 61850) with already defined attributes of CDC's and services (for example IEC 61850-7) onto the already defined ASDU's and services of IEC 60870-5-104 or IEC 60870-5-101. It is not the goal of this technical specification to add any extensions to

Communication networks and systems for power utility automation - Part 80-1: Guideline to exchanging information from a CDC-based data model using IEC 60870-5-101 or IEC 60870-5-104

LST EN 61243-1-2005/A1-2010 带电工作 电压检测器 第1部分：用于超过 1 kV 交流电压的电容式

Live working - Voltage detectors -- Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

DS/EN 61850-7-420:2009 电力公用事业自动化通信网络和系统 第 7-420 部分：基本通信结构 分布式能源逻辑节点

This International Standard defines the IEC 61850 information models to be used in the exchange of information with distributed energy resources (DER), which comprise dispersed generation devices and dispersed storage devices, including reciprocating engines, fuel cells, microturbines, photovoltaics, combined heat and power, and energy storage.The IEC 61850 DER information model standard utilizes existing IEC 61850-7-4 logical nodes where possible, but also defines DER-specific logical nodes where needed.

Communication networks and systems for power utility automation - Part 7-420: Basic communication structure - Distributed energy resources logical nodes

IEC 61243-1:2003+AMD1:2009 CSV 带电作业.电压检测器.第1部分:交流电压超过1kV时使用的电容型

Live working - Voltage detectors - Part 1: Capacitive type to be used for voltages exceeding 1 kV a.c.

DS/EN 61968-13:2009 电力公司的应用程序集成 配电管理的系统接口 第13部分：配电的 CIM RDF 模型交换格式

This part of IEC 61968 specifies the format and rules for exchanging modeling information based upon the CIM (Common Information Model) and related to distribution network data. The intention of this part of IEC 61968 is to allow the exchange of instance data in bulk. Thus, the imported network model data should be sufficient to allow performing network connectivity analysis, including network tracing, outage analysis, load flow calculations, etc. This part could be used for synchronizing geographical information system databases with remote control system databases.This part is closely linked to IEC 61970-452 Energy Management System Application Program In

Application integration at electric utilities - System interfaces for distribution management - Part 13: CIM RDF Model exchange format for distribution

IEC TR 60919-2:2008 带线路换流器的高压直流（HVDC）系统的性能.第2部分:故障和开关

Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 2: Faults and switching

IEC PAS 62544:2008 高压直流输电(HVDC)用有源滤波器

This report prepared by Working Group 14.28 presents both DC and AC active filters, including the existing installations. The items of the report are basically arranged in two consecutive parts, the first one treating the DC application, and the second covering the AC filters. As active DC and AC filters share many concepts, the reader interested in such a subject is encouraged to search for it in both parts.

Active filters in HVDC applications

DS/EN 61968-4:2008 电力公司的应用程序集成 配电管理系统接口 第4部分：记录和资产管理接口

This Part of IEC 61968 specifies the information content of a set of message types that can be used to support many of the business functions related to records and asset management.Typical uses of the message types defined in this Part of IEC 61968 include network extension planning, copying feeder or other network data between systems, network or diagram edits and asset inspection. Message types defined in other Parts of IEC 61968 may also be relevant to these use cases.

Application integration at electric utilities - System interfaces for distribution management - Part 4: Interfaces for records and asset management

DS/IEC/TS 62351-1:2007 电力系统管理和相关信息交换 数据和通信安全 第1部分：通信网络和系统安全 安全问题简介

The scope of the IEC 62351 series is information security for power system control operations. The primary objective is to ""Undertake the development of standards for security of the communication protocols defined by IEC TC 57, specifically the IEC 60870-5 series, the IEC 60870-6 series, the IEC 60850 series, the IEC 61970 series, and the IEC 61968 series. Undertake the development of satndards and/or technical reports on end-to-end security issues"".

Power systems management and associated information exchange - Data and communications security - Part 1: Communication network and system security - Introduction to security issues

ANSI/IEEE 1234:2007 屏蔽电力电缆系统故障定位技术指南

This guide describes different tests and measurements to identify fault locations. It provides troubleshooting and testing personnel with information to quickly identify a faulted cable section and/or locate a cable fault with minimum risk of further damaging serviceable cables or equipment. It applies to medium-voltage distribution cables (1kV-34.5kV).

Guide for Fault Locating Techniques on Shielded Power Cable Systems

IEC PAS 62344:2007 高压直流电(HVDC)连接(NPPAS)用地面电极设计的通用指南

The purpose of this PAS is to provide a guide for the design of electrode stations for HVDC links intended for ground return. This design guide was prepared by the CIGR? Working Group 14.21: HVDC Ground Electrode Design during the period 1995-1998. It is not the purpose of this report to provide detailed instructions on how to work out an HVDC link from the initial idea to final decisions on sites, ratings, constructional principles for converter stations and for connecting lines/cables. In the often hectic planning phase of a new link, the main emphasis will be concentrated on converter stations and the line/cable, while less attention is paid to a simultaneous evaluation of possible current return principles.

General guidelines for the design of ground electrodes for high-voltage direct current (HVDC) links (NPPAS)

JB/T 10635-2006 小功率电流电压变换器 通用技术条件

本标准规定了小功率电流电压变换器的技术要求、试验方法、检验规则、标志、包装、运输、贮存、供货的成套性及质量保证等。 本标准适用于电力系统继电保护及自动化装置中使用的小功率电流电压变换器（以下简称变换器）。 本标准适用于感应式的电流一电流、电流一电压及电压一电压变换器，其他类型的小功率电流电压变换器可参考采用。

General specification for current & voltage transducer with small power

DL/T 972-2005 带电作业工具、装置和设备的质量保证导则

本标准规定了带电作业产品的质量保证原则、试验分类、质量保证方案及质量保证抽样程序等。 本标准适用于在电气装备上进行带电作业所使用的工具、装置和设备在进行质量试验时所掌握的原则和相应的条款。 本标准并非质量管理系列标准，因而不适用于产品生产过程的质量控制。

Live working-quality assurance plans applicable to tools,devices and equipment

DL/T 994-2006 火电厂风机水泵用高压变频器

本标准规定了火电厂风机水泵用高压变频器的技术要求、试验方法、检验规则及标志、包装、运输与贮存。 本标准适用于火电厂风机水泵类负载的高压交流变频调速系统或类似负载的高压交流变频调速系统的制造和安装，本标准不适用改变频率和电压来控制交流高压电动机速度以外的高压变频器。 本标准包含的高压变频器额定输出电压范围为交流1kV～10kV，输出电压为交流0kV～10kV；额定输入功率为50Hz或60Hz、输出频率为0Hz～50/60Hz。

High voltage variable frequency drive used in draft fan and pump of power plant

DS/CLC/TR 60919-1:2006 具有线路换向转换器的高压直流（HVDC）系统的性能 第1部分：稳态条件

This Technical report provides general guidance on the steady-state performance requirements of HVDC systems. It concerns the steady-state performance of two-terminal HVDC systems utilizing 12-pulse converter units comprised of three-phase bridge (double- way) connections (see Figure 1), but it does not cover multi-terminal HVDC transmission systems. Both terminals are assumed to use thyristor valves as the main semiconductor valves and to have power flow capability in both directions. Diode valves are not considered

Performance of high-voltage direct current (HVDC) systems with line-commutated converters - Part 1: Steady-state conditions

DS/EN 60871-1:2006 额定电压高于 1 000 V 的交流电源系统用并联电容器 第1部分：总则

This part of EN 60871 is applicable to both capacitor units and capacitor banks intended to be used, particularly, for power-factor correction of a.c. power systems having a rated voltage above 1 000 V and frequencies of 15 Hz to 60 Hz. This part of EN 60871 also applies to capacitors intended for use in power filter circuits.

Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V -- Part 1: General