31.040.01 电阻器综合 标准查询与下载

DLA DSCC-DWG-07016-2007 低顺磁共振的,韦伯分级的钽晶片固定电容器

This drawing and MIL-PRF-55365 describe the complete requirements for low ESR tantalum chip capacitors.

CAPACITOR, FIXED, TANTALUM CHIP, WEIBULL GRADED, LOW ESR

DLA DSCC-DWG-03017 REV A-2007 0303型正温度系数(PTC)芯片热敏电阻器

This drawing describes the requirements for a thermally sensitive die chip thermistor available in ±1 percent, ±2 percent, ±5 percent, and ±10 percent resistance tolerances.

RESISTOR, THERMAL, THERMISTOR, DIE CHIP, POSITIVE TEMPERATURE COEFFICIENT (PTC) style 0303

DLA DSCC-DWG-93074 REV B-2007 NTC片状1206型热敏电阻器

This drawing describes the requirements for a thermally sensitive 0.120 x 0.060 chip resistor.

THERMISTOR, (THERMALLY SENSITIVE RESISTOR), NTC, CHIP, STYLE 1206

DLA DSCC-DWG-93073 REV D-2007 NTC片状0805型热电阻

This drawing describes the requirements for a 0.080 X 0.050, thermally sensitive, chip resistor.

RESISTOR, THERMAL, CHIP, NTC, STYLE 0805

DLA DSCC-DWG-03018 REV A-2007 0404型负温度系数(NTC)芯片热敏电阻器

This drawing describes the requirements for a thermally sensitive die chip thermistor available in ±1 percent, ±2 percent, ±5 percent, and ±10 percent resistance tolerances. These thermistors exhibit negative temperature efficient (NTC) characteristics and are primarily intended for incorporation into epoxy/wire bond applications.

RESISTOR, THERMAL, THERMISTOR, DIE CHIP, NEGATIVE TEMPERATURE COEFFICIENT (NTC), STYLE 0404

DLA DSCC-DWG-88009 REV E-2007 固定薄膜片状含氮化钽1505型电阻器

This drawing describes the requirements for a .10 x .05 fixed, tantalum chip, resistor.

RESISTOR, CHIP, FIXED, FILM, TANTALUM NITRIDE, STYLE 1050

DLA DSCC-DWG-88008 REV B-2007 固定薄膜片状含氮化钽0505型电阻器

This drawing describes the requirements for a fixed, tantalum nitride, chip resistor.

RESISTOR, CHIP, FIXED, FILM, TANTALUM NITRIDE, STYLE 0505

DLA DSCC-DWG-02002 REV B-2007 芯片是钽材料的固定电容器

Dimensions are in inches.

CAPACITORS, FIXED, TANTALUM, CHIP

DLA DSCC-DWG-02006 REV B-2007 钽芯片固定电容器

This drawing and MIL-PRF-55365 describes the requirements for tantalum chip capacitors.

CAPACITORS, FIXED, TANTALUM, CHIP

DLA DSCC-DWG-99005 REV D-2007 固定薄膜片状8插针组2012型电阻器

This revision described below has been authorized for the document listed.

RESISTOR, CHIP, FIXED, FILM, 8 PIN ARRAY, STYLE 2012

DLA DSCC-DWG-87105 REV C-2007 电阻网络,9-PIN SIP,多层电阻阻值,多层公差,厚层

This drawing describes the requirements for a 9-pin single in line package (SIP).

RESISTOR NETWORK, 9-PIN SIP, MULTIPLE VALUES, MULTIPLE TOLERANCES, HIGH PROFILE

DLA DSCC-DWG-87103 REV C-2007 电阻网络,9-PIN SIP,多层电阻阻值,多层公差,薄层

This drawing describes the requirements for a 9 pin single in line package (SIP).

RESISTOR NETWORK, 9-PIN SIP, MULTIPLE VALUES, MULTIPLE TOLERANCES, LOW PROFILE

DLA DSCC-DWG-87073 REV D-2007 电阻网络,固定性,胶片,8-PIN SIP,多层电阻阻值,复合图表(薄层)

This drawing describes the requirements for an 8-pin, low profile, single-in-line package (SIP), fixed, film,resistor network.

RESISTOR NETWORK, FIXED, FILM, EIGHT PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS, (LOW PROFILE)

DLA DSCC-DWG-87074 REV C-2007 电阻网络,固定性,胶片,8-PIN SIP,多层电阻阻值,复合图表(厚层)

This drawing describes the requirements for a 8-pin, high profile, single-in-line package (SIP), fixed film,resistor network.

RESISTOR NETWORK, FIXED, FILM, 8-PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS, (HIGH PROFILE)

DLA MIL-PRF-15733 H (3)-2007 射频干扰滤光片和电容器 常规

This specification covers the general requirements for low-pass filters and capacitors used to suppress radio frequency/electromagnetic interference. Filters furnished to the requirements of this specification contain shunting capacitors and series inductors (FSC 5915). Capacitors furnished to the requirements of this specification contain shunting capacitors (FSC 5910). For the purposes of this specification, feed-thru capacitor types (C circuit configuration) are referred to herein as a filter. Passband power may be alternating current (ac)and/or direct current (dc) and the filter is used primarily in the reduction of broadband radio frequency interference.

FILTERS AND CAPACITORS, RADIO FREQUENCY INTERFERENCE, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-87068 REV D-2007 电阻网络,固定性,胶片,7-PIN SIP(厚层),复合图表

This drawing describes the requirements for a 7-pin, low profile, single-in-line package (SIP), fixed film,resistor network.

RESISTOR NETWORK, FIXED, FILM, 7-PIN SIP (HIGH PROFILE), MULITPLE SCHEMATICS

DLA DSCC-DWG-87067 REV D-2007 电阻网络,固定性,胶片,7-PIN SIP(薄层),复合图表

This drawing describes the requirements for a 7-pin, low profile, single-in-line package (SIP), fixed, film, resistor network

RESISTOR NETWORK, FIXED, FILM, 7-PIN SIP (LOW PROFILE), MULTIPLE SCHEMATICS

DLA DSCC-DWG-87071 REV D-2007 电阻网络,固定性,胶片,10-PIN SIP,多层电阻阻值,复合图表(薄层)

This drawing describes the requirements for a 10-pin, low profile, single-in-line package (SIP), fixed film, resistor network.

RESISTOR NETWORK, FIXED, FILM, 10-PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS, (LOW PROFILE)

DLA DSCC-DWG-87072 REV D-2007 电阻网络,固定性,胶片,10-PIN SIP,多层电阻阻值,复合图表,多层公差

This drawing describes the requirements for a 10-pin, single-in-line package (SIP), fixed, film, resistor network.

RESISTOR NETWORK, FIXED, FILM, 10-PIN SIP, MULTIPLE RESISTANCE VALUES, MULTIPLE SCHEMATICS AND MULTIPLE TOLERANCES

DLA QPL-39003-92-2007 电解质(固体电解质)钽固定电容器确立可靠性一般规格

An asterisk (*) adjacent to the product listing indicates that qualified parts listed on the QPL are available through distributors authorized by the manufacturer in accordance with Military Standard MIL-STD-790. Names and addresses of the distributors are listed in the back of this QPL. This list is being furnished merely as an aid in identifying authorized sources of ER parts and the responsibility for complying with contractual provisions requiring use of such parts rests with the user of such parts. Such list has been compiled from information furnished by the manufacturers of ER parts prior to release of this QPL for printing.

CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILILTY, GENERAL SPECIFICATION FOR