31.040.01 电阻器综合 标准查询与下载

SJ 50920/6-2005 RN1052型膜固定电阻网络详细规范

本规范规定了M等级的RN1052型5引出端单列直插膜固定电阻网络（以下简称电阻网络）的详细要求。

Resistor network,fixed,film,style RN1052,detail specification for

SJ 50920/7-2005 RN1062型膜固定电阻网络详细规范

本规范规定了M等级的RN1062型6引出端单列直插膜固定电阻网络（以下简称电阻网络）的详细要求。

Resistor network,fixed,film,style RN1062,detail specification for

SJ 50920/8-2005 RN1072型膜固定电阻网络详细规范

本规范规定了M等级的RN1072型7引出端单列直插膜固定电阻网络（以下简称电阻网络）的详细要求。

Resistor network,fixed,film,style RN1072,detail specification for

SJ 50920/9-2005 RN1092型膜固定电阻网络详细规范

本规范规定了M等级的RN1092型9引出端单列直插膜固定电阻网络（以下简称电阻网络）的详细要求。

Resistor network,fixed,film,style RN1092,detail specification for

ARMY QPL-55365-81-2006 一般规格的有既定可靠性和非既定可靠性的.电解(钽)固定电容器

This list has been prepared for use by or for the Government in the actheof products covered by Specification MIL-PRF-55365. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense. All products listed herein have been qualified under the requirements for the product as specified in the latest effective issue of the applicable specification. This list is subject to change without notice; revision or amendment of this list will be issued as necessary. The listing of a product does not release the supplier from compliance with the specification requirements.

CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY AND NONESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA QPL-39006-116-2006 电解(非固体电解质)钽固定电容器,确定可靠性一般规格

An asterisk (*) adjacent to the product listing indicates that qualified parts listed on the QPL are available through distributors authorized by the manufacturer in accordance with Military Standard MIL-STD-790. Names and addresses of the distributors are listed in the back of this QPL. These lists are being furnished merely as an aid in identifying authorized sources of ER parts and the responsibility for complying with contractual provisions requiring use of such parts rests with the user of such parts. They have been compiled from information furnished by the manufacturers of ER parts prior to release of this QPL. Inclusion on, or omission from, the list of a particular distributor cannot be relied upon as a guarantee of such distributor's status since the information upon which the list is based may not have been complete and authorized distributors are subject to change by the manufacturer at any time. Inclusion of a firm on such list is not, under any circumstance, to be considered an endorsement of such firm or its products by the Department of Defense.

CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-93075 REV F-2006 固定线绕表面安装功率型(1/2瓦特)电阻器

This drawing describes the requirements for a 1/2 watt, fixed, surface mounted, wirewound, power type resistor.

RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (1/2 WATT)

DLA MIL-PRF-39006 G-2006 有可靠性指标的模压非固体电解质钽电容器一般规格

This specification covers tantalum, electrolytic (nonsolid electrolyte), fixed capacitors (polarized and nonpolarized), hermetically sealed (see 6.7) in metal cases (see 6.1). Capacitors covered by this specification have reliability established for failure rate levels (FRL) ranging from 2.0 (or 1.0) percent to 0.001 percent per 1,000 hours in accordance with MIL-STD-690. These FRL are established at a 60-percent confidence level and are maintained at a 10-percent producer's risk. A Part Per Million (ppm) quality system is used for assessing the average outgoing quality of ER capacitors supplied to this specification. Statistical Process Control (SPC) techniques are required in the manufacturing process to minimize variation in production of ER capacitors supplied to the requirements of this specification.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-93077 REV F-2006 固定线绕表面安装功率型(1瓦特)电阻器

This drawing describes the requirements for a 2 watt, fixed, surface mounted, wirewound, power type resistor

RESISTOR, FIXED, WIREWOUND, SURFACE MOUNT, POWER TYPE (2 WATT)

DLA DSCC-DWG-07005-2006 1206型8针阵列涂膜固定片状电阻器

This drawing describes the requirements for a multi resistive function in a single chip package.

RESISTOR, CHIP, FIXED, FILM, 8 PIN ARRAY, STYLE 1206

DLA DSCC-DWG-06016 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/31 describe the requirements for fixed tantalum(nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/31 capacitors with additional test requirements for use in high reliability applications.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

DLA DSCC-DWG-06015 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/30 describe the requirements for fixed tantalum (nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/30 capacitors with additional test requirements for use in high reliability applications

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

DLA DSCC-DWG-06014 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/25 describe the requirements for fixed tantalum (nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/25 capacitors with additional test requirements for use in high reliability applications.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

DLA MIL-PRF-39003 L SUPP 1-2006 有可靠性指标的气密封固体电解质钽电容器一般规格

The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change, you should verify the currency of the information above using ASSIST Online database at http://assist.daps.dla.mil .

CAPACITORS, FIXED, ELECTROLYTIC (SOLID ELECTROLYTE), TANTALUM ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-06013 REV A-2006 钽电解质的,(非固定电解质)固定电解电容器

This drawing and MIL-PRF-39006/22 describe the requirements for fixed tantalum (nonsolid electrolyte) capacitors. This drawing offers MIL-PRF-39006/22 capacitors with additional test requirements for use in high reliability applications.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM

DLA DSCC-DWG-04053 REV A-2006 融合钽芯片固定电容器

This drawing describes the complete requirements for fused tantalum chip capacitors.

CAPACITOR, FIXED, FUSED TANTALUM CHIP

DLA MIL-PRF-39006 G SUPP 1-2006 有可靠性指标的模压非固体电解质钽电容器一般规格

The activities listed above were interested in this document as of the date of this document.

CAPACITORS, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR

DLA QPL-14409-55-2005 (活塞式,贯流式微调)可变电容器.一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by Specification MIL -PRF-14409. Listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

CAPACITORS, VARIABLE (PISTON -TYPE, TUBULAR TRIMMER), GENERAL SPECIFICATION FOR

DLA QPL-81-40-2005 陶瓷介电的可变电容器.一般规格

This list has been prepared for use by or for the Government in the acquisition of products covered by subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

CAPACITORS, VARIABLE, CERAMIC DIELECTRIC, GENERAL SPECIFICATION FOR

DLA DSCC-DWG-84083 REV G-2005 密封的抑制射频/电磁干扰的滤波器和电容器

This drawing and MIL-PRF-28861 describe the requirements for radio frequency/electromagnetic interference suppression, hermetically sealed filters and capacitors.

FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, HERMETICALLY SEALED