33.060.40 电缆分配系统 标准查询与下载

DIN CLC/TS 50083-3-3:2015 电视信号、声音信号和交互服务的有线网络 第 3-3 部分：有线网络的有源宽带设备 返回路径中最大工作输出电平的测量方法；德文版 CLC/TS 50083-3-3:2014

Cable networks for television signals, sound signals and interactive services - Part 3-3: Active wideband equipment for cable networks - Methods of measurement of the maximum operating output level in the return path; German version CLC/TS 50083-3-3:2014

DIN EN 50607:2015 单一同轴电缆卫星信号分配.第二代;德文版本EN 50607-2015

Satellite signal distribution over a single coaxial cable - Second generation; German version EN 50607:2015

DIN EN 60728-1:2015 电视信号、声音信号和交互式设备用电缆网络.第1部分:正向通路系统性能(IEC 60728-1-2014);德文版本EN 60728-1-2014

Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths (IEC 60728-1:2014); German version EN 60728-1:2014

DIN EN 60728-1-2:2015 电视信号、声音信号和交互式设备用电缆网络.第1-2部分:运行系统出口的信号传送性能要求(IEC 60728-1-2-2014).德文版本EN 60728-1-2-2014

Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation (IEC 60728-1-2:2014); German version EN 60728-1-2:2014

DIN EN 60728-1-1:2015 电视信号声音信号和交互服务用电缆网络.第1-1部分:双向家用网络用射频(RF)电缆(IEC 60728-1-1-2014);德文版本EN 60728-1-1-2014

Cable networks for television signals, sound signals and interactive services - Part 1-1: RF cabling for two way home networks (IEC 60728-1-1:2014); German version EN 60728-1-1:2014

BS EN 50607:2015 通过单根同轴电缆分配卫星信号 第二代

Satellite signal distribution over a single coaxial cable. Second generation

GSO IEC 60728-2:2014 用于电视信号、声音信号和交互式服务的有线网络 第2部分：设备的电磁兼容性

This part of IEC 60728 applies to the radiation characteristics and immunity to electromagnetic disturbance of EM-active equipment (active and passive equipment) for the reception, processing and distribution of television, sound and interactive multimedia signals as dealt with in the following parts of the IEC 60728 series: – IEC 60728-3 Active wideband equipment for coaxial cable networks – IEC 60728-4 Passive wideband equipment for coaxial cable networks – IEC 60728-5 Headend equipment – IEC 60728-6 Optical equipment It covers the following frequency ranges: – Disturbance voltage injected into the mains 9 kHz to 30 MHz – Radiation from active equipment 5 MHz to 25 GHz – Immunity of active equipment 150 kHz to 25 GHz – Screening effectiveness of passive equipment 5 MHz to 3 GHz (25 GHz)2 This standard specifies requirements for maximum allowed radiation, minimum immunity and minimum screening effectiveness and describes test methods for conformance testing. Due to the fact that cable networks, the former cabled distribution systems for television and sound signals, are more and more used for interactive services, these networks may incorporate also equipment, which carry besides the cable network equipment ports also one or more telecom signal port(s) as well as one Ethernet (IP) port. This equipment should be named as multimedia network equipment. The EMC behaviour of cable network equipment, telecommunication network equipment and multimedia network equipment may be described by the following port structure (see Table 1).

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment

GSO IEC 60728-10:2014 用于电视信号、声音信号和交互式服务的有线网络 第10部分：返回路径的系统性能

This part of IEC 60728 specifies the transparent return path of cable networks operated in the frequency range between 5 MHz and 85 MHz or parts thereof. The upper frequency limit of the return path is reduced to 65 MHz where FM radio signals are transmitted in a cable network. Higher frequencies may be used in fibre based networks. NOTE In addition, it is possible to use the frequency range from 0 MHz to 5 MHz for return path transmissions, for example for NMS or other control, monitoring and signalling purposes. Applications below 5 MHz are not covered by this standard. Specifications of transmission systems (e.g. DOCSIS) are not within the scope of this standard.

Cable networks for television signals, sound signals and interactive services - Part 10: System performance of return paths

DIN EN 60728-14:2014 电视信号, 声音信号和交互服务用电缆网络. 第14部分: 使用RFoG技术的光传输系统 (IEC 60728-14-2014); 德文版本EN 60728-14-2014

Cable networks for television signals, sound signals and interactive services - Part 14: Optical transmission systems using RFoG technology (IEC 60728-14:2014); German version EN 60728-14:2014

DIN EN 60728-10:2014 电视信号、声音信号和交互型服务的电缆网络.第10部分:返回路径的系统性能(IEC 60728-10-2014);德文版本EN 60728-10-2014

Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths (IEC 60728-10:2014); German version EN 60728-10:2014

BS PD CLC/TS 50083-3-3:2014 电视信号, 声音信号和交互服务用电缆网络. 电缆网络的活力宽谱带设备. 返回途径中最大工作输出电平的测量方法

Cable networks for television signals, sound signals and interactive services. Active wideband equipment for cable networks. Methods of measurement of the maximum operating output level in the return path

DIN EN 50083-2 Berichtigung 1:2014 电视信号, 声音信号和交互服务用电缆网络. 第2部分: 设备的电磁兼容性; 德文版本EN 50083-2-2012, DIN EN 50083-2 (VDE 0855-200)-2012-08的勘误表

Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment; German version EN 50083-2:2012, Corrigendum to DIN EN 50083-2 (VDE 0855-200):2012-08

BS PD CLC/TR 50083-2-1:2014 电视信号, 声音信号和交互服务用电缆网络. 电磁兼容性测量

Cable networks for television signals, sound signals and interactive services. Electromagnetic compatibility measurements

ITU-T J.201-2014 交互式电视应用声明性内容格式的协调

Harmonization of declarative content format for interactive television applications

LST EN 60728-10-2014 电视信号, 声音信号和交互服务用电缆网络. 第10部分: 返回路径的系统性能(IEC 60728-10-2014)

Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths (IEC 60728-10:2014)

BS EN 60728-1:2014 电视信号,声音信号和交互式设备用电缆网络.正向传输路径的系统性能

Cable networks for television signals, sound signals and interactive services. System performance of forward paths

EN 60728-1:2014 电视信号、声音信号和交互式服务用电缆网络.第1部分:正向通路系统性能

IEC 60728-1:2014 is applicable to any cable network (including individual receiving systems) having in the forward path a coaxial cable output and primarily intended for television and sound signals operating between about 30 MHz and 3 000 MHz. It specifies the basic methods of measurement of the operational characteristics of cable network having coaxial cable outputs in order to assess the performance of these systems and their performance limits. This fifth edition cancels and replaces the fourth edition published in 2007 and constitutes a technical revision. It includes the following changes: - redrafting of measurement procedure and updating of performance requirements to include DVB-T2 signals; - reference to IEC 60728-1-1 for home networks; - reference to IEC 60728-1-2 for performance requirements at system outlet in operation.

Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths

BS EN 60728-10:2014 电视信号、声音信号和交互式设备用电缆网.第10部分:返回线路的系统性能

Cable networks for television signals, sound signals and interactive services. System performance for return paths

BS PD CLC/TR 50083-10-1:2014 电视和声音信号的电缆分配系统.回程线路的系统性能

Cable networks for television signals, sound signals and interactive services. Guidelines for the implementation of return paths in cable networks

EN 60728-10:2014 电视信号、声音信号和交互服务的有线网络 第10部分：返回路径的系统性能

IEC 60728-10:2014 specifies the transparent return path of cable networks operated in the frequency range between 5 MHz and 85 MHz or parts thereof. The upper frequency limit of the return path is reduced to 65 MHz where FM radio signals are transmitted in a cable network. Higher frequencies may be used in fibre based networks. This third edition cancels and replaces the second edition published in 2005 and constitutes a technical revision. It includes the following changes: - update on the state-of-the-art of return path transmission in cable networks; - provisions for DOCSIS 3.0 and EuroDOCSIS 3.0 transmission standards; - revision of subclause 4.3 on measurement of channel level; - new subclause 4.12 for method of measurement of noise power ratio (NPR) on return paths; - new subclause 4.13 for 10-tone measurements; - new subclause 4.14 for method of measurement of modulation error ratio (MER); - revision of subclause 5.2 on analogue parameters influencing system performance.

Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths