33.060.40 电缆分配系统 标准查询与下载
共找到 360 条与 电缆分配系统 相关的标准，共 24 页
IEC 60728-13:2010(E) specifies the basic system parameters and methods of measurement for optical distribution system having a system outlet in order to assess the system performance and its performance limits. It describes the system specification of FTTH (fibre to the home) network for broadcast signal transmission. It is also applicable to the broadcast signal transmission using telecommunication network if it satisfies the optical portion of this standard. It describes RF transmission for broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces xPON system as a physical layer media.
Cable networks for television signals, sound signals and interactive services - Part 13: Optical systems for broadcast signal transmissions
- ICS
- 33.060.40
- CCS
- 发布
- 2010-05-07
- 实施
- 2010-05-07
Cable networks for television signals, sound signals and interactive services. Hybrid fibre coax outside plant status monitoring. Power supply to transponder interface bus PSTIB
- ICS
- 33.060.40
- CCS
- 发布
- 2010-04-30
- 实施
- 2010-04-30
This part of IEC 60728 applies to the radiation characteristics and immunity to electromagnetic disturbance of EM-active equipment (active and passive equipment) for the reception, processing and distribution of television, sound and interactive multimedia signals as dealt with in the following parts of the IEC 60728 series:– IEC 60728-3 Active wideband equipment for coaxial cable networks– IEC 60728-4 Passive wideband equipment for coaxial cable networks– IEC 60728-5 Headend equipment– IEC 60728-6 Optical equipmentIt covers the following frequency ranges:– Disturbance voltage injected into the mains 9 kHz to 30 MHz– Radiation from active equipment 5 MHz to
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
- ICS
- 33.060.40
- CCS
- 发布
- 2010-03-19
- 实施
- 2010-03-19
This specification describes the PSTIB PHY and DLL layer requirements and protocols on the HFC plant and managed OSP power supplies and related hardware. This specification is part of the suite of specifications developed to support the design and implementation of interoperable management systems for evolving HFC cable networks. Significant changes with respect to the previous edition are in Clause 7, Alternative power supply to transponder interface bus - Physical layer specification.
Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB) (IEC 60728-7-3:2009); English version EN 60728-7-3:2009
- ICS
- 33.060.40
- CCS
- M62
- 发布
- 2010-03
- 实施
- 2010-03-01
IEC 60728-7-3:2009(E) specifies requirements for the Hybrid Fibre Coax (HFC) Outside Plant (OSP) Power Supplies (PS). This standard is part of a series developed to support the design and implementation of interoperable management systems for evolving HFC cable networks. The purpose of the standards is to support the design and implementation of interoperable management systems for evolving HFC cable networks. The Power Supply to Transponder Interface Bus (PSTIB) specification describes the physical (PHY) interface and related messaging and protocols implemented at the Data Link Layer (DLL), layers 1 and 2 respectively in the 7-layer ISO-OSI reference model
Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB)
- ICS
- 33.060.40
- CCS
- 发布
- 2010-02-12
- 实施
- 2010-02-12
This document provides the performance requirements that shall be fulfilled in operation at system outlet or terminal input and describes the summation criteria for the impairments present in the received signals and those produced by the CATV/MATV/SMATV cable network, including individual receiving systems.
Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation (IEC 60728-1-2:2009); German version EN 60728-1-2:2009
- ICS
- 33.060.40
- CCS
- M62
- 发布
- 2010-02
- 实施
- 2010-02-01
Cable networks for television signals, sound signals and interactive services. Performance requirements for signals delivered at the system outlet in operation
- ICS
- 33.060.40
- CCS
- 发布
- 2010-01-31
- 实施
- 2010-01-31
AVC Video Constraints for Cable Television - Part 1: Coding
- ICS
- 33.060.40
- CCS
- M31
- 发布
- 2010
- 实施
This technical report describes the Security, Monitoring, and Automation (SMA)architecture, including all major system components and the network interfaces. The intended audience for this document includes developers of equipment who intend to conform to the SMA standards and network architects who need to understand the overall SMA architecture framework.
IPCablecom SMA Part 1: Architecture Framework Technical Report
- ICS
- 33.060.40
- CCS
- M31
- 发布
- 2010
- 实施
J-STD-70/CEA-2035/DVS-847 standardizes metadata elements describing emergency alert events to devices in a home network, for applications involving the delivery of Commercial Video Services into the home network. Commercial Video Services are sources of audio/video content provided as live or on-demand streams from a particular service provider.
Emergency Alert Metadata for the Home Network
- ICS
- 33.060.40
- CCS
- M30
- 发布
- 2010
- 实施
This specification is a component of the Modular Headend Architecture. In particular, it defines the data plane requirements for receiving, processing, and transmitting MPEG transport streams in EQAMs, compliant with the Video EQAM or Universal EQAM profiles described in the Architectural Overview of the Modular Headend Architecture X[SCTE 137-7]X
Modular Headend Architecture - Part 6: Edge QAM Video Stream Interface
- ICS
- 33.060.40
- CCS
- M64
- 发布
- 2010
- 实施
The need for interfaces between cable set top boxes and digital television (DTV) receivers is one element of a general movement to interconnect multiple audio/visual (A/V) devices on a common bus or network. The IEEE 1394 interface has emerged as the preferred tool to accomplish this goal. This specification contains requirements and options for an IEEE 1394 digital interface between a cable TV set top box (called a Host Device in this standard because it "hosts" a removable security module), and a DTV receiver.
Home Digital Network Interface Specification with Copy Protection
- ICS
- 33.060.40
- CCS
- M14
- 发布
- 2010
- 实施
The goal of this Interpretation document is to serve as an informational enhancement to SCTE 35, Digital Program Insertion Cueing Message for Cable. SCTE 35 is necessarily brief in many areas in order to maintain conciseness and accuracy. This document serves as a companion to SCTE 35.
Recommended Practice for SCTE 35 Digital Program Insertion Cueing Message for Cable
- ICS
- 33.060.40
- CCS
- M31
- 发布
- 2010
- 实施
This document specifies the Signaling, Media, Quality of Service (QoS), and Security requirements to support the PacketCable SMA Architecture. For the SMA gateway device architecture, provisioning and management requirements please refer to [SMA-PROV].
IPCablecom SMA Part 2: Security, Monitoring, and Automation Specification
- ICS
- 33.060.40
- CCS
- M31
- 发布
- 2010
- 实施
This specification describes the provisioning and management of IPCablecom Security, Monitoring, and Automation (SMA) Gateways. The purpose is to specify the device, network and protocol requirements to configure and manage SMA gateways, along with the associated data element definitions. Provisioning and managing the SMA devices (e.g., controls and sensors) are out of scope of this document.
IPCablecom SMA Part 3: Provisioning Specification
- ICS
- 33.060.40
- CCS
- M31
- 发布
- 2010
- 实施
This specification is a component of the Modular Headend Architecture; in particular it defines the Provisioning and Management requirements for the EQAM device.
Modular Headend Architecture - Part 5: Edge QAM Provisioning and Management Interface
- ICS
- 33.060.40
- CCS
- M64
- 发布
- 2010
- 实施
This specification defines the Network Management requirements to support a Modular Cable Modem Termination System (M-CMTS) for headend components compliant to DOCSIS. The purpose of this document is to define the management requirements for the M-CMTS architecture that enables an effective operation of the M-CMTS components.
Modular Headend Architecture Part 3: M-CMTS Operations Support System Interface
- ICS
- 33.060.40
- CCS
- M14
- 发布
- 2010
- 实施
This document provides the branch object identifiers for each of the MIBs within the SCTE HMS Tree. This document has been revised; see the Description in the syntax.
Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOTS Management Information Base (MIB) Definition
- ICS
- 33.060.40
- CCS
- M33
- 发布
- 2010
- 实施
This document defines an interface known as the Downstream External PHY Interface (DEPI) and associated protocol requirements for the transport of downstream user data between the M-CMTS Core and the EQAM. It describes the characteristics of the DEPI interface, provides requirements that must be met by the M-CMTS Core and the EQAM, and also describes various aspects of technical issues that are involved in the implementation and deployment of a DOCSIS system using the M-CMTS architecture.
Modular Head End Architecture Part 2: M-CMTS Downstream External PHY Interface
- ICS
- 33.060.40
- CCS
- M14
- 发布
- 2010
- 实施
This Architectural Overview Technical Report is intended to provide an introduction to the Modular Headend Architecture, with particular emphasis on the EQAM as a key component. This document describes the various architectural entities and the interfaces that connect them, provides an overview of the various profiles of EQAM devices and their operations, and discusses the various specifications that contain normative requirements pertaining to the Modular Headend Architecture.
Modular Headend Architecture - Part 7: EQAM Architectural Overview Technical Report
- ICS
- 33.060.40
- CCS
- M01
- 发布
- 2010
- 实施
