33.060.40 电缆分配系统 标准查询与下载

ANSI/SCTE 37-2010 混合光纤/同轴电缆外部设备状态监测SCTE-HMS-ROOT管理信息库(MIB)的定义

This document provides the branch object identifiers for each of the MIBs within the SCTE HMS Tree. This document has been revised; see the Description in the syntax.

Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-ROOTS Management Information Base (MIB) Definition

ANSI/SCTE 159-2-2010 多媒体应用和服务.第2部分:IPCablecom多媒体网络服务

This specification provides a simple, open interface between a generic Application Server (AS) and a PacketCable Multimedia Application Manager (AM).

Multimedia Application and Service - Part 2: IPCablecom Multimedia Web Services

ANSI/SCTE 137-7-2010 模块化前端架构.第7部分:EQAM架构概述技术报告

This Architectural Overview Technical Report is intended to provide an introduction to the Modular Headend Architecture, with particular emphasis on the EQAM as a key component. This document describes the various architectural entities and the interfaces that connect them, provides an overview of the various profiles of EQAM devices and their operations, and discusses the various specifications that contain normative requirements pertaining to the Modular Headend Architecture.

Modular Headend Architecture - Part 7: EQAM Architectural Overview Technical Report

DS/EN 60728-1-2:2009 电视信号、声音信号和交互服务的有线网络 第 1-2 部分：运行中系统出口处传输信号的性能要求

This part of IEC 60728 provides the minimum performance requirements to be fulfilled in operation at the system outlet or terminal input and describes the summation criteria for the impairments present in the received signals and those produced by the CATV/MATV/SMATV cable network, including individual receiving systems.NOTE 1 When a change of signal format is made at the headend, the summation of the impairments does not apply (see also Clause 57H7).In a building divided into apartment blocks, the signals received by the antennas are distributed by the MATV/SMATV cable network up to the home network interface (HNI); the television signals are then distribu

Cable networks for television signals, sound signals and interactive services - Part 1-2: Performance requirements for signals delivered at the system outlet in operation

IEC 60728-7-3:2009 电视信号、声音信号及交互信号设备用电缆网络.第7-3部分:混合光纤同轴电缆外部线缆状况监测.电力转换器接口总线(PSTIB)

This part of IEC 60728 specifies requirements for the Hybrid Fibre Coax (HFC) Outside Plant (OSP) Power Supplies (PS). This standard is part of a series developed to support the design and implementation of interoperable management systems for evolving HFC cable networks. The purpose of the standards is to support the design and implementation of interoperable management systems for evolving HFC cable networks. The Power Supply to Transponder Interface Bus (PSTIB) specification describes the physical (PHY) interface and related messaging and protocols implemented at the Data Link Layer (DLL)@ layers 1 and 2 respectively in the 7-layer ISO-OSI reference model@ that support communications between compliant transponders and the managed OSP power supplies and other related power equipment to which they interface. This standard describes the PSTIB PHY and DLL layer requirements and protocols that shall be implemented to support reliable communications between all type 2 and type 3 compliant OSP transponders on the HFC plant and managed OSP power supplies and related hardware. Any exceptions to compliance with this standard will be specifically noted as necessary.

Cable networks for television signals, sound signals and interactive services - Part 7-3: Hybrid fibre coax outside plant status monitoring - Power supply to transponder interface bus (PSTIB)

DL/T 1124-2009 数字电力线载波机

本标准规定了数字电力线载波机主体部分的术语、定义、要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于通过35kV及以上电压等级的电力线进行电话和数据传输的数字电力线载波机的主体部分,其示意图见图1。

Digital power-line carrier terminals

DS/CLC/TR 50083-5-1:2009 电视信号、声音信号和交互服务的有线网络 第 5-1 部分：前端的 IP 网关和接口

This Technical Report is an adjunct to the EN 60728/EN 50083 standards series and describes the characteristics of equipment which is used for the connection of IP based networks to and from headends such as described in EN 60728-5. Specifications from the transmission standard ETSI TS 102 034 are taken into account where applicable. The content of the data streams can be digital video, audio or other digital data.This Technical Report describes the necessary characteristics and parameters of equipment such as IP gateways or IP interfaces on equipment at the input of headends (Figure 1) as well as at the output of headends (Figure 2).Equipment at the input

Cable networks for television signals, sound signals and interactive services - Part 5-1: IP gateways and interfaces for headends

DS/EN 50083-10 - 60728-10/Corr. 1:2009 电视信号、声音信号和交互服务的有线网络 第10部分：返回路径的系统性能

Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive services including equipment, systems and installations - for headend-reception, processing and distribution of television and sound signals and their associated data signals, and - for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. All kinds of networks like - CATV-networks - MATV-networks and SMATV-networks - individual receiving networks and all kinds of equipment, systems and installations installed in such networks, are within this scope.

Cable networks for television signals, sound signals and interactive services - Part 10: System performance for return paths

DS/CLC/TR 50083-10-1:2009 电视信号、声音信号和交互服务的有线网络 第 10-1 部分：有线网络中返回路径的实施指南

1.1 GeneralStandards of the EN 50083 and EN 60728 series deal with cable networks including equipment andassociated methods of measurement for headend reception, processing and distribution of televisionsignals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media.This includes• CATV1)-networks;• MATV-networks and SMATV-networks;• individual receiving networks;and all kinds of equipment, systems and installations installed in such networks.The extent of this standardization work is from the antennas and/or special signal source i

Cable networks for television signals, sound signals and interactive services - Part 10-1: Guidelines for the implementation of return paths in cable networks

BS PD CLC/TR 50083-10-1:2009 电视信号，声音信号和交互式服务用的电缆网络.第10-1部分:在电缆网络中执行返回路径的指南

1.1 General Standards of the EN 50083 and EN 60728 series deal with cable networks including equipment and associated methods of measurement for headend reception, processing and distribution of television signals, sound signals and their associated data signals and for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. This includes ? CATV-networks; ? MATV-networks and SMATV-networks; ? individual receiving networks; and all kinds of equipment, systems and installations installed in such networks. The extent of this standardization work is from the antennas and/or special signal source inputs to the headend or other interface points to the network up to the terminal input. The standardization of any user terminals (i.e., tuners, receivers, decoders, multimedia terminals, etc.) as well as of any coaxial, balanced and optical cables and accessories thereof is excluded.

Cable networks for television signals, sound signals and interactive services — Part 10-1: Guidelines for the implementation of return paths in cable networks

DS/EN 50083-8/A11:2009 电视信号、声音信号和交互服务的有线网络 第8部分：网络的电磁兼容性

Standards of EN 50083 series deal with cable networks for television signals, sound signals and interactive series including equipment, systems and installations: - for headend-reception, processing and distribution of sound and television signals and their associated data signals and - for processing, interfacing and transmitting all kinds of signals for interactive services using all applicable transmission media. All kinds of networks like: - CATV-networks; -MATV- and SMATV-networks; -individual receiving networks and all kinds of equipment, systems and installations installed in such networks, are within this scope. The extent of this standardisation wo

Cable networks for television signals, sound signals and interactive services - Part 8: Electromagnetic compatibility for networks

ANSI/SCTE 95-2009 HMS内置设备HMTS操作原理

This document contains information about the background of the Hybrid Management Termination System (HMTS). This document is a companion document for the HMTS MIB, and does not replace the MIB. Although this document has been written to be consistent with the HMTS MIB, in case there would be any conflicts between these two documents, the MIB is the reference.

HMS Inside Plant HMTS Theory of Operation

ANSI/SCTE 24-8-2009 个人间电缆通信.第8部分:信令管理信息库(MIB)的要求

This specification describes the IPCablecom Signaling (SIG) MIB requirements.

IPCablecom Part 8: Signaling Management Information Base (MIB) Requirements

ANSI/SCTE 24-12-2009 个人间电缆通信.第12部分:中继网关控制协议(TGCP)

This document describes an IPCablecom profile of an Application Programming Interface (API) called a Media Gateway Control Interface (MGCI) and a corresponding protocol (MGCP) for controlling Voice-over-IP (VoIP) PSTN Gateways from external call control elements. The MGCP assumes a call control architecture where the call control 'intelligence' is outside the gateways and handled by external call control elements. The IPCablecom profile as described in this document will be referred to as the IPCablecom Trunking Gateway Control Protocol (TGCP).

IPCablecom Part 12: Trunking Gateway Control Protocol (TGCP)

ANSI/SCTE 24-5-2009 个人间电缆通信.第5部分:使用电缆调制解调器通过有线电视网络传送实时服务的媒体终端适配器(MTA)装置定位要求

This specification describes the IPCablecom 1.0 embedded-MTA device initialization and provisioning. This specification is issued to facilitate design and field-testing leading to manufacturability and interoperability of conforming hardware and software by multiple vendors.

IPCablecom Part 5: Media Terminal Adapter (MTA) Device Provisioning Requirements for the Delivery of Real-Time Service over Cable Television Using Cable Modems

ANSI/SCTE 24-4-2009 个人间电缆通信.第4部分:使用电缆调制解调器的有线电视网络提供实时服务动态服务质量

The scope of this specification is to define the QoS Architecture for the "Access" portion of the IPCablecom network, provided to requesting applications on a per-flow basis. The access portion of the network is defined to be between the Multi-media Terminal Adapter (MTA) and the Cable Modem Termination System (CMTS), including the DOCSIS network.

IPCablecom Part 4: Dynamic Quality of Service for the Provision of Real-Time Services over Cable Television Networks Using Cable Modems

ANSI/SCTE 24-3-2009 个人间电缆通信.第3部分:使用数据调制解调器的有线电视网络提供实时服务的网络呼叫信令协议

This specification describes a profile of the Media Gateway Control Protocol (MGCP) for IPCablecom embedded clients, which we will refer to as the IPCablecom Network-based Call Signaling (NCS) protocol. MGCP is a call signaling protocol for use in a centralized call control architecture, and assumes relatively simple client devices. The call signaling protocol is one layer of the overall IPCablecom suite of specifications and relies upon companion protocol specifications to provide complete end-to-end IPCablecom functionality.

IPCablecom Part 3: Network Call Signaling Protocol for the Delivery of Time-Critical Services over Cable Television Using Data Modems

ANSI/SCTE 24-7-2009 个人间电缆通信.第7部分:媒体终端适配器(MTA)管理信息库(MIB)要求

This standard describes the IPCablecom MTA MIB requirement.

IPCablecom Part 7: Media Terminal Adapter (MTA) Management Information Base (MIB) Requirements

ANSI/SCTE 24-1-2009 个人间电缆通信1.0第1部分:使用电缆调制解调器的有线电视网络提供时间关键服务的结构体系框架

This document provides the architectural framework that will enable cable television operators to provide time critical services over their networks that have been enhanced to support cable modems.

IPCablecom 1.0 Part 1: Architectural Framework for the Delivery of Time Critical Services Over Cable Television Networks Using Cable Modems

ANSI/SCTE 38-8-2009 混合光纤/同轴电缆厂外状态监测SCTE-HMS-DOWNLOAD-MIB管理信息库(MIB)定义

This document contains the definitions used to maintain one or more loadable firmware images on an HMS transponder.

Hybrid Fiber/Coax Outside Plant Status Monitoring SCTE-HMS-DOWNLOAD-MIB Management Information Base (MIB) Definition