共找到 482 条与 电视接收机 相关的标准,共 33 页
本标准规定了标准清晰度电视(SDTV)、高清晰度电视(HDTV)阴极射线管(CRT)显示器(以下简称显示器)的测量条件和测量方法。 本标准适用于标准清晰度、高清晰度数字电视阴极射线管显示器。
Methods of measurement for digital television cathode ray tube displays
本标准规定了电子投影机的术语和定义、测量条件、测量项目、测量方法、测量结果表述等。 本标准适用于前投影式固定分辨力电子投影机(以下简称投影机),包括:LCD投影机、DLP投影机、LCoS投影机等。
Methods of measurement for electronic projectors
本标准规定了标准清晰度电视(SDTV)、高清晰度电视(HDTV)、阴极射线管(CRT)背投影显示器(以下简称显示器)的测量条件和测量方法。 本标准适用于标准清晰度、高清晰度数字电视阴极射线管背投影显示器。
Methods of measurement for digital television cathode ray tube rear projection displays
本标准规定了数字电视接收设备条件接收系统通用接口(以下简称DTV-CI)的测试方法。 本标准适用于机卡分离方式的数字电视接收设备。
Interface specification for conditional access of digital television receiver-Part 1-2:DTV-CI Test specification
Baseline specifications of satellite and terrestrial receivers for ISDB(Integrated Service for Digital Broadcast)
이 규격은 종합 정보 디지털 방송(ISDB) 시스템을 위한 수신기들의 기본적인 기능들, 등
Baseline specifications of satellite and terrestrial receivers for ISDB(Integrated Service for Digital Broadcast)
本规范规定了直读式极化衰减器的要求、质量保证规定和交货准备等内容。 本规范适用于波导型直读式极化衰减器(以下简称极化衰减器),其它类型的直读式极化衰减器也可参照本规范。
General specification for direct reading rotary vane attenuators
Provides television receiver manufacturers with the technical specifications and requirements of digital television receivers in order to achieve successful reception from free-to-air DTTB transmissions that comply with the Australian DTTB transmission
Digital television - Requirements for receivers - VHF/UHF DVB-T television broadcasts
General methods of measurement for digital television receivers
IEC 62028 deals with the standard conditions and methods of measurement on digital television receivers which receive digital television broadcast transmissions. IEC 62028 deals with the determination of performance and allows the comparison of equipment by listing the characteristics which are useful for specifications and by laying down uniform measuring methods of these characteristics. Performance requirements are not specified, since they are specified by other international, regional or domestic standards for the systems. It does not include the measurements specific to the transmission system, such as: measurements on receivers for satellite transmis
General methods of measurement for digital television receivers
IEC 62028 deals with the standard conditions and methods of measurement on digital television receivers which receive digital television broadcast transmissions.
General methods of measurement for digital television receivers (IEC 62028:2002); German version EN 62028:2004
specifies the basic functions, ratings, and performance of receivers for the Integrated Services Digital Broadcasting (ISDB) system. It applies to: receivers for standard digital television broadcasting, high-definition television broadcasting, and radio
Baseline specifications of satellite and terrestrial receivers for ISDB (Integrated Service for Digital Broadcast)
High fidelity audio equipment and systems:Minimum performance requirements-Part 12:Sound output of television tuners
Electronic Programme Guide (EPG) - Protocol for a TV Guide using electronic data transmission.
Digital terrestrial television receivers for the DVB-T system - Part 1 : baseline receiver specification.
) Applies to cathode ray tubes (CRTs) and cathode ray tube assemblies intended for use as components in apparatus designed to be used in accordance with the rules of the Canadian Electrical Code, Part 1, and the American National Standard National Electrical Code, ANSI/NFPA 70-1993. These requirements apply to CRTs intended for use in such apparatus as electrical and electronic measuring and testing equipment, information technology equipment, medical equipment, telephone equipment, and television equipment, that conforms with the requirements applicable to such equipment
2/13/2003 (2p)
IEC 62028 deals with the standard conditions and methods of measurement on digital television receivers which receive digital television broadcast transmissions. IEC 62028 deals with the determination of performance and allows the comparison of equipment by listing the characteristics which are useful for specifications and by laying down uniform measuring methods of these characteristics. Performance requirements are not specified, since they are specified by other international, regional or domestic standards for the systems. It does not include the measurements specific to the transmission system, such as: measurements on receivers for satellite transmis
General methods of measurement for digital television receivers
This part of IEC 62216 specifies the baseline receiver for the DVB-T system. It concerns: ? broadcasters, and ? receiver manufacturers. The objective is to define: ? how to provide broadcasts that are understood by all receivers and enable receivers to provide good facilities to their users; ? the behaviour required from receivers to work well with these broadcasts and to be attractive to consumers. To avoid doubt, the words “shall”, “should” etc. are used in the traditional way to distinguish issues that are important versus those that are optional. The term “shall” is also used to identify mandatory requirements that are inherited from other specifications that have greater force. This specification does not consider interactive applications and the data broadcasting that would support them. Subtitling and teletext are considered to be components of TV services. Standalone teletext services are not part of this standard. This specification primarily addresses terrestrial delivery of digital transmissions. This specification primarily addresses deployment in countries that use European Latin script based languages.
Digital terrestrial television receivers for the DVB-T system. Baseline receiver specification
Recommended methods of measurement on receivers for television broadcast transmissions. Part 6: Measurement under conditions different from broadcast signal standards (IEC 60107-6:1989)
This European Standard is an application standard, identifying recommended interfaces for connections of digital video broadcast integrated receiver decoder (DVB-IRD) equipment. If a recommended interface is supported, then the full specification of that interface, which may include options, applies. Interfaces not mentioned in this document are not excluded and especially interfaces which are under development at the time of writing of this document may be added at a later stage. For mechanical and electrical details of the interfaces, reference is made to existing standards of IEC or CENELEC wherever possible, or standards which are known to be in an adva
Interfaces for DVB-IRD
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号