33.160.25 电视接收机 标准查询与下载
共找到 482 条与 电视接收机 相关的标准，共 33 页
IEC 62028 deals with the standard conditions and methods of measurement on digital television receivers which receive digital television broadcast transmissions. IEC 62028 deals with the determination of performance and allows the comparison of equipment by listing the characteristics which are useful for specifications and by laying down uniform measuring methods of these characteristics. Performance requirements are not specified, since they are specified by other international, regional or domestic standards for the systems. It does not include the measurements specific to the transmission system, such as; · measurements on receivers for satellite transmission systems, · measurements on receivers for terrestrial transmission systems, · measurements on receivers for cable transmission systems, · measurements specific to sound channels, and · measurements specific to data channels. IEC 62028 does not include methods of measurement on outdoor units and antennas for satellite reception, for which reference is required to other appropriate IEC standards. IEC 62028 does not deal with general safety matters, for which reference is required to IEC 60065, or other appropriate IEC safety standards, nor with radiation and immunity, which will be dealt with by CISPR.
General methods of measurement for digital television receivers
- ICS
- 33.160.25
- CCS
- M73
- 发布
- 2002-03
- 实施
- 2011-12-13
System and interface on surface terminal equipment for digital TV between heaven and earth
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 2002-01-31
- 实施
- 2002-05-01
Specifies parameters for analogue baseband interfaces for video and audio to be used between ancilliary equipment and television receiving equipment.
Consumer television interfaces - Analogue baseband
- ICS
- 33.160.25
- CCS
- 发布
- 2001-11-01
- 实施
This part of IEC 62216 specifies the baseline receiver for the DVB-T system. It concerns: · broadcasters, and · receiver manufacturers. The objective is to define: · how to provide broadcasts that are understood by all receivers and enable receivers to provide good facilities to their users; · the behaviour required from receivers to work well with these broadcasts and to be attractive to consumers. To avoid doubt, the words "shall", "should" etc. are used in the traditional way to distinguish issues that are important versus those that are optional. The term "shall" is also used to identify mandatory requirements that are inherited from other specifications that have greater force. This specification does not consider interactive applications and the data broadcasting that would support them. Subtitling and teletext are considered to be components of TV services. Standalone teletext services are not part of this standard. This specification primarily addresses terrestrial delivery of digital transmissions. This specification primarily addresses deployment in countries that use European Latin script based languages.
Digital terrestrial television receivers for the DVB-T system - Part 1: Baseline receiver specification
- ICS
- 33.160.25
- CCS
- M73
- 发布
- 2001-10
- 实施
- 2002-09-09
This standard defines the interconnection characteristics of peritelevision devices, both between themselves and with television receivers (monochrome or colour).
Domestic and similar electronic equipment interconnection requirements: Peritelevision connector
- ICS
- 33.160.25
- CCS
- 发布
- 2001-03-07
- 实施
- 2000-12-14
The document deals with the interface between the host and the scrambling and CA applications, which will operate on an external module.#,,#
Common interface specification for conditional access and other digital video broadcasting decoder applications; German version EN 50221:1997 + Corrigendum:2000
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 2001-03
- 实施
- 2001-03-01
Covers flyback transformers, high-voltage multipliers, deflection yokes, and picture-tube high-voltage-neck components intended to be employed in television-type appliances
10/12/2001 (6p)
- ICS
- 33.160.25
- CCS
- 发布
- 2001
- 实施
Applies to cathode ray tubes (CRTs) and cathode ray tube assemblies intended for use as components in apparatus designed to be used in accordance with the rules of the Canadian Electrical Code, Part 1, and the American National Standard National Electrical Code, ANSI/NFPA 70-1993. These requirements apply to CRTs intended for use in such apparatus as electrical and electronic measuring and testing equipment, information technology equipment, medical equipment, telephone equipment, and television equipment, that conforms with the requirements applicable to such equipment
5/11/2001 (10p)
- ICS
- 33.160.25
- CCS
- 发布
- 2001
- 实施
The standard applies to broadcast television receivers designed for the reception of multichannel sound using subcarriers. Is applicable to both the FM-FM and BTSC systems described in CCIR report 795.
Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems
- ICS
- 33.160.25
- CCS
- 发布
- 2000-10-09
- 实施
- 2000-06-23
The standard applies to television receivers designed for the reception of television broadcast transmissions with multi-channel sound using the two-carrier FM-systems.
Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system
- ICS
- 33.160.25
- CCS
- 发布
- 2000-10-09
- 实施
- 2000-06-23
The methods of measuring the electrical characteristics described in this standard apply particularly to broadcast television receivers designed for the reception of the multichannel sound systems using subcarriers.
Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems (IEC 60107-3:1988 + A1:1999)
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 2000-09
- 实施
The methods of measurement for the important electrical characteristics of receivers described in this standard apply to television receivers designed for the reception of television broadcast transmission using the two-carrier FM-system. The two-carrier system offers the possibility of audio-transmission using three different modes of operation: dual-sound: transmission of two independed sound-signals, stereophonic: transmission of left and right channel sound signal and monaural: transmission of a monaural signal.#,,#
Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system (IEC 60107-4:1988 + A1:1999)
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 2000-09
- 实施
The document deals upon the enhanced 625-line Phased Alternative Line (PAL) television, PALplus.#,,#
Television systems - Enhanced 625-line Phased Alternative Line (PAL) television - PALplus (Endorsement of the English version ETS 300731:1997 as German standard)
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 2000-04
- 实施
Applies to television receivers designed for the reception of television broadcasts using the two-channel digital sound system. The sound coding-system is based in NICAM 728 and is transmitted by a quadrature phase-shift keying (QPSK) modulated digital s
Recommended methods of measurements on receivers for television broadcast transmissions Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 2000-01-20
- 实施
The document describes methods of measuremnet for the more important electrical characteristics of television receivers, designed for the reception of television broadcast transmission using the NICAM two-channel digital sound-systems.#,,#
Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system (IEC 60107-5:1992 + A1:1999); German versi
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 1999-12
- 实施
Usable Screen Dimensions for Monochrome Display Tubes
- ICS
- 33.160.25
- CCS
- L38
- 发布
- 1999-07-01
- 实施
The methods of measurement described in this part of IEC 107 apply to television receivers designed for the reception of television broadcasts using the two-channel digital sound system. The sound coding-system is based on NICAM 728 and is transmitted by a quadrature phase-shift keying (QPSK) modulated digital subcarrier. NOTE - NICAM 728 is the abbreviated form of Near Instantaneous Companded Audio Multiplex at 728 kbit/s.
Recommended methods of measurements on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 1999-06
- 实施
The methods of measurement described in this standard apply to television receivers designed for the reception of television broadcast transmission using the two-carrier FM-system, for the associated sound (CCIR, Vol. X, Report 795-2, Table Ⅱ). note: *CCIR: International Radio Consultative Committee.
Recommended methods of measurement on receivers for television broadcast transmissions - Part 4: Electrical measurements on multichannel sound television receivers using the two-carrier FM-system
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 1999-06
- 实施
The methods of measuring the electrical characteristics described in this standard apply particularly to broadcast television receivers designed for the reception of multichannel sound systems using subcarriers. NOTE - Currently two systems are in operation: The FM-FM and BTSC systems, which are described in ITU-R Report BS.795-3 note: * ITU-R: International Telecommunication Union Radiocommunication Sector.
Recommended methods of measurement on receivers for television broadcast transmissions - Part 3: Electrical measurements on multichannel sound television receivers using subcarrier systems
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 1999-05
- 实施
This object is to define quality parameters and to provide a guideline for measurements on D2-MAC/Packet equipments under uniform and repetitive conditions.
Recommended methods of measurement on receivers for television broadcast transmissions - Part 8: Measurement on D2-MAC/packet equipment (IEC 60107-8:1997); German version EN 60107-8:1997
- ICS
- 33.160.25
- CCS
- M74
- 发布
- 1999-03
- 实施
