33.180.10 光纤和光缆 标准查询与下载

BS EN IEC 60794-1-309:2023 光纤电缆 通用规范 基本光缆测试程序 电缆元件测试方法 填充或驱替化合物的渗出和蒸发 方法 G9

1   Scope This part of IEC 60794 describes the test procedures to be used in establishing uniform requirements for optical fibre cable elements, filling compounds or flooding compounds, for the environmental property-bleeding and evaporation. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. NOTE Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.

Optical fibre cables - Generic specification. Basic optical cable test procedures. Cable element test methods. Bleeding and evaporation of filling or flooding compounds, Method G9

T/QGCML 885-2023 通信用波长段扩展的非色散位移单模光纤

本标准规定了通信用波长段扩展的非色散位移单模光纤的术语和定义、产品分类、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于通信用波长段扩展的非色散位移单模光纤的生产、试验及验收。

Non-dispersion-shifted single-mode fiber with extended wavelength range for communication

IEC 60794-1-1:2023 CMV 光纤电缆.第1-1部分:总规范.总则

Optical fibre cables - Part 1-1: Generic specification - General

IEC 60794-1-1:2023 光纤电缆 第 1-1 部分：通用规范 概述

Optical fibre cables - Part 1-1: Generic specification - General

YD/T 1115.2-2023 通信电缆光缆用阻水材料 第2部分：阻水纱

本文件规定了通信电缆光缆用聚酯纤维阻水纱（以下简称阻水纱）的机械物理性能、化学性能、防霉性能、环保性能、外观、材质等技术要求，描述了相应的试验方法和检验规则，规定了包装、标志、运输和贮存等方面的内容，同时给出了产品型号和标记。 本文件适用于通信电缆、光缆、光电混合缆用阻水纱的设计、制造、使用和检验。 注：以加强功能为主、阻水功能为辅的芳纶纤维阻水纱和玻璃纤维阻水纱本文件未包含，其相关要求在YD/T 1181.2和YD/T 1181.4中规定。

Water-blocking materials for communication cables and optical cables-Part 2: Water-blocking yarns

YD/T 1115.1-2023 通信电缆光缆用阻水材料 第1部分：阻水带

本文件规定了通信电缆光缆用阻水带的膨胀性能、机械物理性能、化学性能、防霉性能、环保性能、外观结构、尺寸重量等技术要求，描述了相应的试验方法和检验规则，规定了包装、标志、运输和贮存等方面的内容，同时给出了产品分类、型号和标记。 本文件适用于通信电缆、光缆、光电混合缆用阻水带的设计、制造、使用和检验。

Water-blocking materials for communication cables and optical cables-Part 1: Water-blocking tapes

23/30473806 DC BS EN IEC 61280-2-13 光纤通信子系统测试程序 第 2-13 部分 数字系统 误差矢量幅度的测量

BS EN IEC 61280-2-13. Fibre optic communication subsystem test procedures - Part 2-13. Digital systems. Measurement of error vector magnitude

23/30464811 DC BS EN IEC 60794-1-213 光纤电缆 第 1-213 部分 通用规范 基本光缆测试程序 环境测试方法 微管耐压 方法 F13

BS EN IEC 60794-1-213. Optical fibre cables - Part 1-213. Generic specification. Basic optical cable test procedures. Environmental test methods. Microduct pressure withstand, Method F13

IEC 63267-1:2023 纤维光学互连器件和无源元件 纤维光学连接器光学接口 第1部分:增强型宏观弯曲损耗多模50μm芯径光纤 总则和指南

Fibre optic interconnecting devices and passive components - Fibre optic connector optical interfaces - Part 1: Enhanced macro bend loss multimode 50 μm core diameter fibres - General and guidance

BS EN IEC 60794-1-308:2023 光纤电缆 通用规范 基本光缆测试程序 电缆元件测试方法 色带残余扭曲测试 方法 G8

1   Scope This part of IEC 60794 describes test procedures to evaluate the degree of permanent twist in an uncabled ribbon or in a cabled optical fibre ribbon. This document applies to optical fibre ribbons in optical cables for use with telecommunication equipment and devices employing similar techniques, and to optical fibre ribbons in cables having a combination of both optical fibres and electrical conductors. This document is not applicable to partially-bonded ribbons. The method for partially-bonded ribbons is under consideration. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. NOTE The environmental testing of optical fibre ribbon would be valuable for some applications. Useful information about suitable test methods can be found in the optical fibre standards IEC 60793‑1‑50, IEC 60793‑1‑51, IEC 60793‑1‑52, and IEC 60793‑1‑53.

Optical fibre cables - Generic specification. Basic optical cable test procedures. Cable element test methods. Ribbon residual twist test, method G8

EN IEC 60794-2-10:2023 光纤电缆 第 2-10 部分：室内光纤电缆 单工和双工电缆的系列规范

IEC 60794-2-10:2023 is available as IEC 60794-2-10:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60794-2-10:2023 covers simplex and duplex optical fibre cables for indoor use. The requirements of IEC 60794-2 are applicable to cables covered by this document. For cables intended for installation in industrial applications specified in ISO/IEC 11801-1, MICE specifications can be additionally required (see Clause B.2). This third edition cancels and replaces the second edition published in 2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - updating of normative references; - updating of all relevant A1 and B1 fibre category and sub-category designations.

Optical fibre cables - Part 2-10: Indoor optical fibre cables - Family specification for simplex and duplex cables

IEC 60794-1-309:2023 光纤电缆.第1-309部分:总规范.基本光缆试验程序.电缆元件试验方法.填充或淹没化合物的渗出和蒸发.方法G9

Optical fibre cables - Part 1-309: Generic specification - Basic optical cable test procedures - Cable element test methods - Bleeding and evaporation of filling or flooding compounds, Method G9

IEC 60794-1-301:2023 光纤电缆 第 1-301 部分：通用规范 基本光缆测试程序 电缆元件测试方法 弯曲测试，方法 G1

Optical fibre cables - Part 1-301: Generic specification - Basic optical cable test procedures - Cable elements test methods - Bend test, method G1

IEC 60794-1-303:2023 光纤电缆.第1-303部分:总规范.基本光缆试验程序.带状尺寸.孔径规 方法G3

Optical fibre cables - Part 1-303: Generic specification - Basic optical cable test procedures - Ribbon dimensions - Aperture gauge, method G3

IEC 60794-2-50:2023 RLV 光纤电缆.第2-50部分:室内电缆.端接电缆组件用单工和双工电缆的系列规范

Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies

IEC 60794-2-22:2023 RLV 光纤电缆.第2-22部分:室内电缆.端接分接电缆组件用多单工分接光缆的详细规范

Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables for use in terminated breakout cable assemblies

IEC 60794-2-22:2023 光纤电缆.第2-22部分:室内电缆.端接分接电缆组件用多单工分接光缆的详细规范

Optical fibre cables - Part 2-22: Indoor cables - Detail specification for multi-simplex breakout optical cables for use in terminated breakout cable assemblies

BS EN IEC 60794-1-305:2023 光纤电缆 通用规范 基本光缆测试程序 电缆元件测试方法 色带撕裂（可分离性） 方法 G5

1   Scope This part of IEC 60794 describes test procedures to be used in establishing uniform requirements for optical fibre ribbons as optical fibre cable elements for the mechanical property-tear (separability). This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. NOTE Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc. This test is applicable for edge-bonded ribbons and encapsulated ribbons specified in IEC 60794‑1‑31, and not intended to be used for partially-bonded ribbons.

Optical fibre cables - Generic specification. Basic optical cable test procedures. Cable element test methods. Ribbon tear (separability), Method G5

IEC 60794-2-50:2023 光纤电缆.第2-50部分:室内电缆.端接电缆组件用单工和双工电缆的系列规范

Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies

IEC 60793-1-44:2023 光纤 第 1-44 部分：测量方法和测试程序 截止波长

Optical fibres - Part 1-44: Measurement methods and test procedures - Cut-off wavelength