35.240.67 标准查询与下载

BS ISO/IEC 14543-5-104:2024 信息技术 家庭电子系统 (HES) 架构 HES Class 2 和 Class 3 的智能分组和资源共享 基于 RA 服务器的智能锁应用

Information technology. Home electronic system (HES) architecture - Intelligent grouping and resource sharing for HES Class 2 and Class 3. RA server-based smart lock application

GSO ISO 16484-6:2024 楼宇自动化和控制系统 (BACS) 第6部分：数据通信一致性测试

This standard provides a comprehensive set of procedures for verifying the correct implementation of each capability claimed on a BACnet PICS including: (a) support of each claimed BACnet service, either as an initiator, executor, or both, (b) support of each claimed BACnet object-type, including both required properties and each claimed optional property, (c) support of the BACnet network layer protocol, (d) support of each claimed data link option, and (e) support of all claimed special functionality.

Building automation and control systems (BACS) — Part 6: Data communication conformance testing

BS ISO/IEC 14543-5-103:2023 信息技术 家庭电子系统 (HES) 架构 HES Class 2 和 Class 3 的智能分组和资源共享 远程访问智能音频互连配置文件

Information technology. Home electronic system (HES) architecture - Intelligent grouping and resource sharing for HES Class 2 and Class 3. Remote access smart audio interconnection profile

ISO/FDIS 16484-1:2023 楼宇自动化和控制系统 (BACS) — 第 1 部分：项目规范和实施

Building automation and control systems (BACS) — Part 1: Project specification and implementation

ISO/CD 16484-4:2023 楼宇自动化和控制系统 (BACS) 第 4 部分：控制应用

Building automation and control systems (BACS) — Part 4: Control applications

ISO/DIS 16484-2:2023 楼宇自动化和控制系统 (BACS) 第 2 部分：硬件

Building automation and control systems (BACS) — Part 2: Hardware

ISO/DIS 16484-1:2023 楼宇自动化和控制系统 (BACS) 第 1 部分：项目规范和实施

Building automation and control systems (BACS) — Part 1: Project specification and implementation

BS ISO/IEC 14543-4-302:2023 信息技术 家用电子系统（HES）架构 电力存储系统和控制器的应用协议

Information technology. Home electronic system (HES) architecture - Application protocols for electrical storage systems and controllers

EN 17549-2:2023 建筑信息模型 基于 EN ISO 16739 1 的信息结构，用于交换建筑对象的数据模板和数据表 第2部分：可配置的建筑对象和要求

The digital transformation of the construction industry includes also the digital transformation of the supply chaine of construction products. With EN ISO 16739-1 exists an open language to design, transfer and maintain construction models. The construction models (e.g. of a building) contain a digital twin of real-life products. The data of these products should be transported in a digital format on the way from the factory to the building owner. This product data should be expressed also in an easy and open way. The creators of product data files should be able to do this manually or automatically, as they like it. The users of product data should be able to use it to: • Express their requirements related to products • Describe configurable products • Import product data easily in the BIM models at any stage of the project (design, construction, operation) • Export product data easily from the BIM models at any stage of the project (design, construction, operation) These scenarios fit in the business models of manufacturers, planners, construction companies and facility managers. The working group 4 of CEN-TC442 has published proposals for creating new work items in the sector of CEN regarding the storage and the transport of product data in the sector of building information modelling (BIM): EN ISO 16739-1:2018: Industry Foundation Classes (IFC) for data sharing in the construction and facility management industries- Part 1: Data schema EN ISO 12006-3: Building construction – Organization of information about construction works – Part 3: Framework for object-oriented information prEN ISO 23386: Building information modelling and other digital processes used in Construction – Methodology to describe, author and maintain properties in interconnected dictionaries prEN ISO 23387: Data templates for construction works entities, Part 1: Objects, collections, and relationships defining the general structure of data templates This standard defines a format to negotiate product data templates, express requirements and describe configurable products and therefore fills the missing link between the product data sources (e.g. catalogs) from the manufacturers and the BIM models of the designers, builders, and owners.

Building information modelling - Information structure based on EN ISO 16739 1 to exchange data templates and data sheets for construction objects - Part 2: Configurable construction objects and requirements

ISO/DIS 7817 建筑信息模型“信息需求水平”概念和原则

Building information modelling — Level of information need — Concepts and principles

ISO/IEC 14543-4-302:2023 信息技术 家用电子系统（HES）架构 第 4-302 部分：电力存储系统和控制器的应用协议

Information technology - Home electronic system (HES) architecture - Part 4-302: Application protocols for electrical storage systems and controllers

BS EN 17632-1:2022 建筑信息模型（BIM）语义建模和链接（SML）通用建模模式

This document addresses syntactic and semantic interoperability for information describing assets going through their life cycle in the built environment. It assumes the underlying technical interoperability provided already by the Internet/World Wide Web (WWW) technology-stack. The syntactic aspects relate to the Linked Data (LD)/Semantic Web (SW) formats and the SPARQL direct access method provided. The semantic aspects relate to the LD/SW-based information models in the form of thesauri and ontologies giving meaning to the information. The following information architecture (Figure 1) applies. Figure 1 — Information architecture with (grey areas indicating the scope of this document) This document specifies: — a conceptual “L1: Information language” with four RDF-based language bindings being SKOS, RDFS, — a choice of ‘linked data’/RDF-based formats (to be used for all modelling and language levels); and — a generic Top Level Information Model of a total “M1: Information model”, here “an upper ontology”, including: — a set of generic information modelling patterns for identification, annotation, enumeration datatypes, complex quality/quantity modelling, decomposition and grouping. This modelling approach for information models and information sets is relevant within the built environment from multiple perspectives such as: — Building information modelling (BIM); — Geographical information systems (GIS); — Systems engineering (SE); — Monitoring & control (M&C); and — Electronic document management (EDM). Annex E discusses in an informative way how the information models and sets relevant for these different worlds can be linked together using LD/SW technology. This document does not specify a full meta-‘information model’, sometimes referred to as a ‘Knowledge Model (KM)’. EN ISO 12006-3 provides such an often used model for the built environment. In Annex D, Subclause D.3 it is shown how this existing model can be made compliant to this document. The only direct support for this meta level comes in the form of the possibility to define ‘types’ (enumeration types or concept types) and ‘objectifications’ as metaconcepts. This document does not specify a meta-‘information language’ since this is already provided by the concrete RDF-based language bindings (being RDFS). The scope of this document in general excludes the following: — Business process modelling; — Software implementation aspects; — Information packaging and transportation/transaction aspects already handled by ISO TC59/SC13 Information container for linked document delivery (ICDD) ([13]) respectively various information delivery manual (IDM) / information exchange requirements (EIR)-related initiatives; and — Domain-specific (here: ‘built environment’-specific) content modelling in the form of concepts, attributes and relations at end-user level (the actual ontologies themselves) beyond a generic top level information model (‘upper ontology’) and modelling and linking patterns.

Building information modelling (BIM). Semantic modelling and linking (SML) - Generic modelling patterns

EN 17632-1:2022 建筑信息模型（BIM） 语义建模和链接（SML） 第1部分：通用建模模式

This document addresses syntactic and semantic interoperability for information describing assets going through their life cycle in the built environment. It assumes the underlying technical interoperability provided already by the Internet/World Wide Web (WWW) technology-stack. The syntactic aspects relate to the Linked Data (LD)/Semantic Web (SW) formats and the SPARQL direct access method provided. The semantic aspects relate to the LD/SW-based information models in the form of thesauri and ontologies giving meaning to the information. The following information architecture (Figure 1) applies. This document specifies: - a conceptual "L1: Information language" with four RDF-based language bindings being SKOS, RDFS, OWL and SHACL, including: - a choice of 'linked data'/RDF-based formats (to be used for all modelling and language levels); and - a generic Top Level Information Model of a total "M1: Information model", here "an upper ontology", including: - a set of generic information modelling patterns for identification, annotation, enumeration datatypes, complex quality/quantity modelling, decomposition and grouping. This modelling approach for information models and information sets is relevant within the built environment from multiple perspectives such as: - Building information modelling (BIM); - Geographical information systems (GIS); - Systems engineering (SE); - Monitoring & control (M&C); and - Electronic document management (EDM). Annex E discusses in an informative way how the information models and sets relevant for these different worlds can be linked together using LD/SW technology. This document does not specify a full meta-'information model', sometimes referred to as a 'Knowledge Model (KM)'. EN ISO 12006-3 provides such an often used model for the built environment. In Annex D, Subclause D.3 it is shown how this existing model can be made compliant to this document. The only direct support for this meta level comes in the form of the possibility to define 'types' (enumeration types or concept types) and 'objectifications' as metaconcepts. This document does not specify a meta-'information language' since this is already provided by the concrete RDF-based language bindings (being RDFS). The scope of this document in general excludes the following: - Business process modelling; - Software implementation aspects; - Information packaging and transportation/transaction aspects already handled by ISO TC59/SC13 Information container for linked document delivery (ICDD) ([13]) respectively various information delivery manual (IDM) / information exchange requirements (EIR)-related initiatives; and - Domain-specific (here: 'built environment'-specific) content modelling in the form of concepts, attributes and relations at end-user level (the actual ontologies themselves) beyond a generic top level information model ('upper ontology') and modelling and linking patterns.

Building information modelling (BIM) - Semantic modelling and linking (SML) - Part 1: Generic modelling patterns

EN ISO 29481-3:2022 建筑信息模型.信息交付手册.第3部分:数据模式

This document is the technical addition to the methodology set out in ISO 29481-1. It defines a specification to store, exchange and read information delivery manual (IDM) specifications in a standardized and machine-readable way.

Building information models - Information delivery manual - Part 3: Data schema (ISO 29481-3:2022)

EN ISO 16484-5:2022 建筑自动化和控制系统.第5部分:数据通信协议

The purpose of this document is to define data communication services and protocols for computer equipment used for monitoring and control of HVAC&R and other building systems and to define, in addition, an abstract, object-oriented representation of information communicated between such equipment, thereby facilitating the application and use of digital control technology in buildings.

Building automation and control systems (BACS) - Part 5: Data communication protocol (ISO 16484-5:2022)

EN ISO 19650-4:2022 建筑物和土木工程信息的组织和数字化 包括建筑物信息建模（BIM）.使用建筑物信息建模的信息管理.第4部分:信息交换

This document specifies the detailed process and criteria for decision makings when executing an information exchange as specified by the ISO 19650 series to ensure the quality of the resulting project information model or asset information model. It details the implementation of the concepts in ISO 19650-1 and is applicable to any information exchange within the delivery stages covered by ISO 19650-2 and operational trigger events covered by ISO 19650-3. This document is applicable to assets of all sizes and all levels of complexity. This includes portfolios of buildings, campuses, infrastructure networks, individual buildings and pieces of infrastructure. The requirements in this document should be applied in a way that is appropriate to the scale and complexity of the asset. This document makes use of the phrase “shall consider”. This phrase is used to introduce a list of items that the person in question is required to think about carefully in connection with the primary requirement described in the subclause. The amount of thought involved, the time taken to complete it, and the need for supporting evidence depend on the complexity of the asset, the experience of the person(s) involved, and the requirements of any national policy on introducing building information modelling. On a relatively small or straightforward asset, it can be possible to complete, or dismiss as not relevant, some of these “shall consider” items very quickly. One way to help identify which of the “shall consider” statements are relevant can be to review each statement and create templates for assets of different sizes and complexity.

Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) - Information management using building information modelling - Part 4: Information exchange (ISO 19650-4:2022)

22/30456018 DC BS EN 17549-1 建筑信息模型 基于 EN ISO 16739 1 的信息结构 用于交换构造对象的数据模板和数据表 第 1 部分：数据模板和配置的构造对象

BS EN 17549-1. Building information modelling. Information structure based on EN ISO 16739 1 to exchange data templates and data sheets for construction objects - Part 1. Data templates and configured construction objects

GSO ISO/IEC 14543-5-101:2022 信息技术 家用电子系统（HES）架构 第5-101部分：智能分组和资源共享远程AV访问配置文件

ISO/IEC 14543-5-101:2019 (E) enables a media connection, resource sharing and co-operation among computers, home appliances and consumer electronics using remote access (RA). Also, users and devices can share and control media resources. This document specifies: • an IGRS remote media access profile based on the IGRS RA core protocol and the IGRS RA platform protocol, and • application rules for the interoperation between IGRS RA media users and devices

Information technology — Home electronic systems (HES) architecture — Part 5-101: Intelligent grouping and resource sharing remote AV access profile

EN ISO 22057:2022 建筑物和土木工程的可持续性.建筑信息建模（BIM）中建筑产品环境产品声明（EPD）使用的数据模板

This document provides the principles and requirements to enable environmental and technical data provided in EPDs for construction products and services, construction elements and integrated technical systems to be used in BIM to assist in the assessment of the environmental performance of a construction works over its life cycle. This document gives requirements on structuring EPD information using a data template according to ISO 23386 and ISO 23387, to make EPD data machine-interpretable and to enable their integration into information-driven design, construction, use and end-of-life stages. This document is applicable to structuring generic LCA data for use within a BIM environment, as these data are required in the absence of suitable EPD data to enable assessment of the environmental performance at the construction works level. The assessment of environmental performance at the construction works level is not covered by this document.

Sustainability in buildings and civil engineering works - Data templates for the use of environmental product declarations (EPDs) for construction products in building information modelling (BIM) (ISO 22057:2022)

DB1331/T 003-2022 雄安新区建构筑物通信建设规范

Communication construction specifications for buildings in Xiongan New Area