37.060.20 电影胶片、暗盒 标准查询与下载

KS A ISO 7832:2018 摄影 - 摄影型音频级测试胶片的光电输出因子 - 测量和校准

Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration

BS ISO 17266:2018 摄影 35 毫米电影冲印和底片上的多通道模拟和数字摄影声音和控制记录 以及 70 毫米电影冲印和底片上的数字声音控制记录 位置和宽度尺寸

1   Scope This document specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture prints and negatives.

Cinematography. Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives. Position and width dimensions

ISO 17266:2018 电影摄影.在35mm和70mm电影拷贝及底片上多频道模拟数字电影摄影声音和控制录音.位置和宽度尺寸

This document specifies the lateral, and vertical where applicable, positions and width dimensions of multichannel analogue and digital photographic sound records and control tracks on 35 mm and 70 mm motion-picture prints and negatives.

Cinematography - Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives - Position and width dimensions

BS ISO 12222:2017 电影摄影 在16mm、35mm和65mm电影胶片上厂家印制的潜影标记 规范和尺寸

Cinematography. Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film. Specifications and dimensions

ISO 12222:2017 电影.16mm、35mm和65mm电影胶片上厂家印制的潜影标记.规范和尺寸

Cinematography - Manufacturer-printed, latent image identification on 16 mm, 35 mm and 65 mm motion-picture film - Specifications and dimensions

GSO ISO 3646:2016 电影摄影 电影摄影机暗盒 8毫米S型II型 用于指示胶片速度、色彩平衡和胶片识别的插槽、突出部分和暗盒孔 尺寸和位置

This International Standard specifies the dimensions and location of cartridge slots, projections and a hole for the Model II 8 mm Type S film camera cartridge which, when included by the manufacturer, automatically preset some cameras in accordance with the effective film speed, and insert or withdraw a colour-balancing filter. The combinations which are possible, together with the area available for visible film identification, are also described.

Cinematography -- Motion-picture camera cartridge, 8 mm Type S Model II -- Slots, projections and cartridge hole for indicating film speed, colour balance and film identification -- Dimensions and positions

GSO ISO 8400:2016 电影摄影 16毫米电影拷贝的乳剂表面位置 识别

This International Standard describes a method for identifying the relationship of the image geometry to the emulsion surface of 16 mm motion-picture prints.

Cinematography -- Position of emulsion surface of 16 mm motion-picture prints -- Identification

GSO ISO 74:2016 电影摄影 摄像机光圈产生的图像区域和8毫米R型电影胶片上的最大可投影图像区域 位置和尺寸

This International Standard specifies the location and dimensions of the image area produced by the camera aperture on 8 mm Type R motion-picture film, and the dimensions of the maximum film image area intended for projection.

Cinematography -- Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-picture film -- Positions and dimensions

GSO ISO 8395:2016 电影摄影 用于再现带磁条的70毫米电影发行拷贝的测试胶片 规格

This International Standard specifies basic technical characteristics for magnetic sound test films used for checking, adjusting and measuring 70 mm motionpicture projector sound systems and sound reproduction channels of motion-picture installations. This International Standard includes specifications for test films intended for checking, adjusting and measuring of: a) azimuth of the magnetic head gaps (azimuth alignment test film; see table 1); b) output level balance of several motion-picture projectors or systems and interchannel balance on each projector or system (signal level test film; see table 2); c) frequency response of the sound reproduction channels (multi-frequency test film; see tables 3 and 4); d) non-uniformity in velocity of film travel (flutter) (flutter test film; see table 5).

Cinematography -- Test films for the reproduction of 70 mm motion-picture release prints with magnetic stripes -- Specifications

GSO ISO 3774:2016 电影摄影 35 毫米电影胶片打孔 8 毫米 S 型 (1-3-5-7-0) 和 (1-0) 切割和打孔尺寸

This International Standard specifies the cutting and perforating dimensions for 35 mm motion-picture raw stock either with five rows of perforations in positions 1-3-5-7-0 or with two rows of perforations in positions 1-0, as well as the width of the 8 mm strip after processing and slitting the print stock.

Cinematography -- 35 mm motion-picture film perforated 8 mm Type S (1-3-5-7-0) and (1-0) -- Cutting and perforating dimensions

GSO ISO 8758:2016 电影摄影 16毫米和35毫米电影胶片和拷贝上的摄影控制和数据记录 尺寸和位置

This International Standard specifies the location and dimensions of photographic control and data records on 16 mm motion-picture originals, intermediates and prints, 35 mm motion-picture camera negatives and 35 mm motion-picture release prints. It also specifies the width scanned by the control data reproducer, and the reproducer spectral sensitivity. In the case of release prints, this International Standard is restricted to those containing variable area sound records in accordance with ISO 2939 and ISO 7343.

Cinematography -- Photographic control and data records on 16 mm and 35 mm motion-picture film and prints -- Dimensions and location

GSO ISO 7831:2016 电影摄影 再现 35 毫米摄影声音的 A 链频率响应 再现特性

This International Standard specifies the A-chain electrical frequency response characteristic for photographic sound reproduction in motion-picture control rooms and indoor theatres. It is intended, in conjunction with ISO 2969, to assist in the standardization of recording monitor and reproduction characteristics of motion-picture sound dubbing theatres, review rooms and indoor theatres. This International Standard covers that part of the motion-picture sound system from the transducer to the input terminals of the main fader.

Cinematography -- A-chain frequency response for reproduction of 35 mm photographic sound -- Reproduction characteristics

GSO ISO 9525:2016 电影摄影 17.5毫米磁性胶片上两张录音的磁头间隙 位置和宽度尺寸

This International Standard specifies the lateral positions and width dimensions of the recording heads for two magnetic sound records and a control track on 17,5 mm single perforated magnetic recording film. It also specifies the reproducing velocity of the film travel.

Cinematography -- Recording head gaps for two sound records on 17,5 mm magnetic film -- Positions and width dimensions

GSO ISO 3773:2016 电影摄影 放映机用 8 毫米 S 型电影胶片的胶带接头 尺寸

This International Standard specifies the dimensions of mated cut splices on 8 mm motion-picture film perforated 8 mm Type S made with a transparent adhesive tape. The specifications herein apply to magnetic and photographic sound films as well as to silent films intended only for projection.

Cinematography -- Tape splices for 8 mm Type S motion-picture film for projector use -- Dimensions

GSO ISO 3641:2016 电影摄影 电影摄影机暗盒 8毫米S型II型 暗盒安装和卷取芯驱动 尺寸和规格

This International Standard specifies the external dimensions of the 8 mm Type S film camera cartridge, Model II, cartridge-camera fit specifications, and core dimensions.

Cinematography -- Motion-picture camera cartridge, 8 mm Type S Model II -- Cartridge fit and take-up core drive -- Dimensions and specifications

GSO ISO 69:2016 电影摄影 16毫米电影和磁性胶片 切割和穿孔尺寸

This International Standard specifies the cutting and perforating dimensions for 16 mm motion-picture and magnetic films with one or two rows of perforations for the following two categories: a) 16 mm motion-picture and magnetic films; b) manufacturer-designated 16 mm professional motion-picture camera films with tighter tolerances. This International Standard applies to safety raw stock film as described in ISO 543.

Cinematography -- 16 mm motion-picture and magnetic film -- Cutting and perforating dimensions

GSO ISO 8687:2016 电影摄影 8毫米S型、16毫米和35毫米可变面积摄影声音记录的信噪比 测量方法

This International Standard specifies a preferred method and an alternative method for measuring the signal-to-noise ratio of 8 mm type S, 16 mm and 35 mm variable-area photographic sound records.

Cinematography -- Signal-to-noise ratio of 8 mm Type S, 16 mm and 35 mm variable-area photographic sound records -- Method of measurement

GSO ISO 8622:2016 电影摄影 带有磁条的 70 毫米电影发行拷贝上的磁性声音记录 A 链再现特性

This International Standard specifies the A-chain electrical frequency response characteristics for magnetic sound reproduction in motion-picture control rooms and indoor theatres. It is also intended for use, in conjunction with ISO 2969, in the standardization of recording monitor and reproduction characteristics of motion-picture sound in studio dubbing theatres, review rooms and indoor theatres. This International Standard covers that part of the motion-picture sound system from the transducer to the input terminals of the main fader, and should be read in conjunction with ISO 8590, which defines the recorded characteristics for 35 mm and 70 mm magnetic striped prints.

Cinematography -- Magnetic sound records on 70 mm motion-picture release prints with magnetic stripes -- A-chain reproduction characteristics

GSO ISO 7832:2016 电影摄影 照相式音频电平测试胶片的光电输出因数 测量和校准

This International Standard specifies a method of measuring and calibrating the photoelectric output factor of single channel analogue photographic-type audio-level test films in all gauges, using a calibrating sound reproducer. It is applicable to both variable area- and variable density-type sound records with a silver audio track. It also specifies the performance of a calibrating audio reproducer. Calibrated audio-level test films are employed to measure the precise output level of photographic sound reproducers and the photoelectric output factor of different sound records. They are also employed to establish a reference level on a standard program level meter, should that be appropriate for the installation in use.

Cinematography -- Photoelectric output factor of photographic-type audio-level test films -- Measurement and calibration

GSO ISO 71:2016 电影摄影 16毫米、35/16毫米和35/32毫米电影胶片上的16毫米负片录音 位置和尺寸

This International Standard specifies the positions and width dimensions of 16 mm negative monophonic photographic sound record on 16 mm, 35/16 mm, and 35/32 mm motion picture film intended for printing of 16 mm release prints.

Cinematography -- 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film -- Positions and dimensions