39.040.10 手表 标准查询与下载

ISO 1413:2016 钟表.防震手表

This International Standard specifies the minimum requirements for shock-resistant wrist watches and describes the corresponding test method. It is based on the simulation of the shock received by a wrist watch while falling from a height of 1 m onto a horizontal wooden floor (an equivalent surface is described in B.1.1).

Horology - Shock-resistant wrist watches

BS ISO 3764:2016 计时仪器 动作 类型、尺寸和术语

Timekeeping instruments. Movements. Types, dimensions and nomenclature

ISO 3764:2016 计时仪器.手表机心.形状、尺寸和名称

Timekeeping instruments - Movements - Types, dimensions and nomenclature

BS ISO 3160-2:2015 表壳和附件.金合金覆盖层.纯度、厚度、耐腐蚀性能和结合强度的测定

Watch-cases and accessories. Gold alloy coverings. Determination of fineness, thickness, corrosion resistance and adhesion

GSO ISO 1413:2015 钟表 防震手表

  Scope is not provided for this standard

Horology -- Shock-resistant watches

GSO ISO 22810:2015 钟表 防水手表

  Scope is not provided for this standard

Horology -- Water-resistant watches

ISO 3160-2:2015 表壳和附件.金合金壳.第2部分:光洁度、厚度、抗腐蚀性和粘附性测定

Watch-cases and accessories - Gold alloy coverings - Part 2: Determination of fineness, thickness, corrosion resistance and adhesion

BS PD ISO/TS 18684:2015 计时仪器. 由硬质材料制成的手表外部零件. 通用要求和试验方法

Timekeeping instruments. Watch external parts made of hard materials. General requirements and test methods

QB/T 4887-2015 热塑性聚氨酯表带

本标准规定了热塑性聚氨酯表带(以下简称“表带”)的术语和定义、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于以热塑性聚氨酯弹性体(TPU)制造的表带，其他橡胶类材料制造的表带亦可参照使用。

Thermoplastic polyurethane bracelets

GSO ISO 12819:2015 带电池的手表电池寿命评估方法

This International Standard specifies two methods for determining the battery life of a battery-powered watch and specifies the labelling to be used by the manufacturers or the distributors to inform the users. According to the available information, either the theoretical battery life or the practical battery life must be calculated using the equations given in this International Standard.

Methods of evaluation of the battery life of a battery-powered watch

GSO ISO 9701:2015 腕表和怀表 时针、分针和秒针的直径合适

This International Standard specifies the fitting diameters of hour, minute and second hands for wrist and pocket watches.

Wrist and pocket watches -- Fitting diameters for hour, minute and second hands

ISO/TS 18684:2015 计时仪器. 由硬质材料制成的手表外部零件. 通用要求和试验方法

Timekeeping instruments - Watch external parts made of hard materials - General requirements and test methods

NF S86-604:2015 制表业 手表金属表链的表征

Horlogerie - Caractérisation des bracelets métalliques pour montres

GSO ISO 3160-1:2014 表壳和配件 金合金涂层 第1部分：一般要求

This part of ISO 3160 specifies general requirements concerning gold alloy coverings. It is applicable to watch-cases and their accessories, including bracelets.

Watch-cases and accessories -- Gold alloy coverings -- Part 1: General requirements

SB/T 11106-2014 二手钟表寄售经营服务规范

本标准规定了二手钟表寄售经营的环境、经营方式、商品鉴定检测、经营管理、售后服务等要求。

Second-hand horologeconsignment service standards

QB/T 2312-2014 手表离合轮方孔尺寸系列

本标准规定了手表离合轮方孔的尺寸系列。本标准适用于手表用离合轮方孔。

Square hole dimension series of watch sliding pinions

QB/T 4781-2014 手表外观件的外观检验条件

本标准规定了手表外观件的外观检验条件。本标准适用于手表外观件的外观检验,钟表及其他零部件的外观检验可参照使用。

Test conditions for appearance of watch casings

QB/T 4779-2014 液晶式语音报时石英手表

本标准规定了液晶式语音报时石英手表(以下简称“报时表”)的要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于具有石英谐振器、标称工作电压为DC3.0V,以液晶显示时间并可播报当前时间的报时表。

Liquid crystal displaying telling-time quartz watches

QB/T 4776-2014 手表柄头

本标准规定了手表柄头(以下简称“柄头”)的部位名称及分类、要求、试验方法、检验规则及标志、包装、运输、贮存。本标准适用于基体为金属材料的柄头,基体为其他材料的柄头亦可参照使用。

Watch crowns

QB/T 1907-2014 手表防震器

本标准规定了手表防震器(以下简称“防震器”)的术语和定义、产品分类、尺寸符号和名称、尺寸系列、要求、试验方法、检验规则、标志、包装、贮存。本标准适用于机械手表机心用防震器。

Shock absorbers for watches