共找到 10 条与 相关的标准,共 1 页
5.1 These test methods determine whether copper products will be resistant to embrittlement when exposed to elevated temperatures in a reducing atmosphere. 5.1.1 It is assumed that all who use these test methods will be trained personnel capable of performing these procedures skillfully and safely. It is expected that work will be performed in a properly equipped facility. 1.1 These test methods describe procedures for determining the presence of cuprous oxide (Cu2O) in products made from deoxidized and oxygen-free copper. 1.2 The test methods appear in the following order: Sections Microscopical Examination without Thermal Treatment 9 – 11 Microscopical Examination after Thermal Treatment 13 – 15 Closed Bend Test after Thermal Treatment 17 – 19 Reverse Bend Test after Thermal Treatment 21 – 23 1.3 Units—The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this stand......
Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
These test methods determine whether copper products will be resistant to embrittlement when exposed to elevated temperatures in a reducing atmosphere. It is assumed that all who use these test methods will be trained personnel capable of performing these procedures skillfully and safely. It is expected that work will be performed in a properly equipped facility.1.1 These test methods describe procedures for determining the presence of cuprous oxide (Cu2O) in products made from deoxidized and oxygen-free copper.
Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
These test methods determine whether copper products will be resistant to embrittlement when exposed to elevated temperatures in a reducing atmosphere. 5.1.1 It is assumed that all who use these test methods will be trained personnel capable of performing these procedures skillfully and safely. It is expected that work will be performed in a properly equipped facility.1.1 These test methods describe procedures for determining the presence of cuprous oxide (Cu2O) in products made from deoxidized and oxygen-free copper.1.2 Units Inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.1.4 The test methods appear in the following order:SectionsMicroscopical Examination without Thermal TreatmentMicroscopical Examination after Thermal TreatmentClosed Bend Test after Thermal TreatmentReverse Bend Test after Thermal Treatment
Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper
This standard applies to hand-held electric tools whose directly or indirectly operated machine tools produce dust during their operation. It specifies the dimensions of the exhaust spigots for connection of exhaust tubes.
Hand-held motor-operated electric tools; exhaust spigots; connecting dimensions
Acceptance code for machine tools; Part 1 : Geometric accuracy of machines operating under no-load or finishing conditions
Conditions of acceptance and installation for work-holding fixed tables of machine tools
Aerospace; identification plates for datums on workshop facilities Aéronautique et espace; plaques d'identification des rêférences sur de outillagesDiese Norm ist anerkannt durch das Luftfahrt-Bundesamt.
Aerospace; identification plates for datums on workshop facilities
Machine tools; modular units; vertical column units; constructional sizes Machines-outils; éléments standards; unités de montant; dimensions de constructionDiese Norm ist in Zusammenarbeit mit dem Verein Deutscher Ingenieure (VDI), Ausschu? ?Automatisi
Machine tools; modular units; vertical column units; constructional sizes
Machine tools; modular units;centre bases for longitudinal cycle machines; constructional sizesMachines-outils; éléments standards; b?tis centraux pour machines à cycle longitudinal dimensions de constructionDiese Norm ist in Zusammenarbeit mit dem Vere
Machine Tools; Modular Units; Centre Bases for Longitudinal Cycle Machines, Constructional Sizes
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号