共找到 783 条与 传动装置、悬挂装置 相关的标准,共 53 页
本文件规定了汽车直线行驶稳定性试验方法。 本文件适用于GB/T15089 中定义的M、N类车辆,其他类型车辆可参照执行。
Straight-line driving stability test procedure for automobile
本文件规定了乘用车车轮动态弯曲疲劳试验和动态径向疲劳试验的试验车轮、性能要求及试验方法。 本文件适用于GB/T3730.1 中规定的乘用车所使用的车轮。
Passenger car—Wheels—Performance requirements and test methods for cornering and radial fatigue
本文件规定了商用车车轮弯曲和径向疲劳试验的试验车轮、性能要求及试验方法。 本文件适用于GB/T3730.1 规定的商用车辆和挂车所使用的车轮。
Commercial vehicles—Wheels—Performance requirements and test methods for cornering and radial fatigue
本文件规定了乘用车自由转向特性转向脉冲开环试验方法。 本文件适用于M1 类车辆,其他类型车辆可参照执行。
Passenger cars一Free-steer behaviour一Steering-pulse open-loop test method
本文件规定了汽车转向盘从直线行驶状态至离开中心区的试验方法。 本文件适用于M1 和N1 类车辆,其他类型汽车可参照执行。
Test method of transition test for the quantification of vehicle on-centre handling
本标准规定了汽车自动变速器再制造的术语和定义、拆解、分类和清洗、检查、检测与修复、装配、性能要求和试验方法、检验规则、标识和包装。本标准适用于液力自动变速器(AT)、双离合自动变速器(DCT)、无级自动变速器(CVT)的再制造,其他机动车辆的自动变速器的再制造可参照执行。本标准不适用于汽车用机械式自动变速器(AMT)的再制造。
The technical specifications for remanufactured automotive components—Automatic transmission
本标准规定了汽车转向系统的术语和定义.技术要求和试验方法。本标准适用于GB/T15089规定的M类、N类车辆和O类挂车。本标准不适用于:一一气压传动转向系统;一一3.1.1.5定义的带自动转向系统的车辆。
Steering system of motor vehicles—Basic requirements
Nonmetallic paper based wet type frictional materials
Nonmetallic rubber base wet type frictional materials
Safety performance requirements and test methods of automobile wheels
Motor vehicles steering system terms and definitions
本标准规定了汽车操纵稳定性的术语及其定义。本标准适用于各类汽车。
Terms and definitions for vehicle controllability and stability
本标准规定了一种实验室试验方法,用来评定全部或部分用轻合金制造的车轮轴向(横向)撞击路缘的性能、本标准适用于道路车辆轻合金车轮,目的是对车轮进行验证和/或质量控制、本标准中所有术语与ISO 3911 一致、
Road vehicles.Light alloy wheels.Impact test procedure
本标准规定了商用车辆车轮的试验方法和性能要求。 本标准适用于商用车辆辐射板式车轮、辐条式车轮和可拆卸式轮辋的车轮。
Performance requirements and test methods of commercial vehicles wheels
本标准规定了汽车在脉冲输入行驶和随机输入行驶工况下的平顺性试验方法。 本标准适用于M类、N类车辆。
Method of running test.Automotive ride comfort
本标准规定了汽车平顺性方面的常用名词和术语。 本标准适用于汽车平顺性设计、试验与研究。
Terms and definitions for Automotive ride comfort
本标准规定了充气轮胎用车轮和轮辋的相关术语词汇和规格代号及标志系统,旨在定义车轮和轮辋的基础术语,而非提供车轮所有设计特征的详尽列表。本标准还规定了车轮和轮辋标志的内容、位置和最小尺寸,目的是确立全球统一的车轮和轮辋识别系统。
Wheels and rims for pneumatic tyres.Vocabulary,designation and marking
本标准规定了在具有6、8或10个螺栓孔的汽车轮毂上安装商用道路汽车车轮所要求的尺寸。 图1和表1中的中心孔定心的平面安装方式为推荐方式,其他方式为目前采用的方式。 下述的技术要求并不意味着不同汽车的车轮是可以互换的。
Disc wheels for trucks.Dimensional characteristics of attachment on hub
本标准规定了乘用车车轮的疲劳试验性能要求和试验方法。 本标准适用于乘用车刚制辐板式车轮和全部或部分轻合金制造的汽车车轮。
Performance requirements and test methods of passenger car wheels
本标准规定了汽车转向系统结构的设计和安装的基本要求。 本标准适用于M类和N类公路用汽车。
Steering system of motor vehicles-Basic requirements
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号