共找到 783 条与 传动装置、悬挂装置 相关的标准,共 53 页
本文件规定了轻型商用车用干摩擦式膜片弹簧离合器总成(以下简称离合器)的术语和定义、结构组成、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存、质量承诺。 本文件适用于 N1 类、N2 类及 M2 类机动车用离合器,规格大于 240 mm 小于等于 350 mm 的干摩擦式膜片弹簧离合器总成。
Dry friction diaphragm spring clutches assembly for light commercial vehicles
This document specifies a laboratory test procedure to evaluate the axial (lateral) kerb impact collision properties of a wheel manufactured either wholly or partly of light alloys. It is intended for passenger car applications, and special vehicle applications where there is a possibility of the wheel impacting the kerb, with the purpose of screening and/or quality control of the wheel.
Road vehicles — Light alloy wheels — Lateral impact test
本文件规定了双质量飞轮的术语和定义、技术要求及试验方法。 本文件适用于汽车用的双质量飞轮。
Technical requirements and test methods for dual mass flywheels
本文件规定了自调整膜片弹簧离合器总成(包括盖总成和从动盘总成,以下简称自调整离合器)的 术语和定义、技术要求和台架试验方法。 本文件适用于自调整离合器。
Technical requirements and bench test methods for self-adjusting diaphragm spring clutch assembly
本文件规定了汽车干摩擦式离合器总成(包括盖总成和从动盘总成,以下简称离合器)的技术要求 和台架试验方法。 本文件适用于汽车干摩擦式离合器。
Technical requirements and bench test methods for automobile dry friction clutch assemblies
本文件规定了汽车带传动齿条助力式电动转向器的技术要求及试验方法。 本文件适用于汽车带传动齿条助力式电动转向器。
Belt driven rack assist type electric power steering gear technical requirement and test method
本文件规定了重型货车用液压动力转向器的耐久性技术要求及试验方法。 本文件适用于重型货车用液压动力转向器。
Heavy duty truck hydraulic power steering gear durability technical requirement and test method
Test methods for remanufactured transfer case of passenger cars
Test methods for remanufactured automatic transmission of commercial vehicles
本文件规定了挂车空气悬架总成的分类及基本参数、技术要求、检验规则、标志、包装、运输和贮存.
Trailer Air Suspension Assembly Specifications
本文件规定了转向拉杆接头总成的术语和定义、基本参数、要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于汽车使用的转向拉杆接头总成的生产检验。
Steering tie rod joint assembly
本文件规定了适用于轮胎制造企业使用的轮胎胎胚空中悬挂搬运车的型号、基本参数、结构、技术要求、试验方法、检验规则、标志、包装、运输和贮存等技术要求。
Aerial suspension transporter for tire embryo
What is ISO 4000-2 about? ISO 4000-2 is part two of the multi-series standard on passenger car tyres and rims. ISO 4000-2 specifies the designation, contour and dimensions of 5° tapered (drop-centre) rims primarily intended for passenger cars . Who is ISO 4000-2 for? ISO 4000-2 on passenger car tyres and rims is applicable to: ...
Passenger car tyres and rims. Rims
Road vehicles. Wheels and rims. Use, general maintenance and safety requirements and out-of-service conditions
Passenger car and light truck vehicle wheels. Clip and adhesive balance weight and rim flange nomenclature, test procedures and performance requirements
This document specifies the designation, contour and dimensions of 5° tapered (drop-centre) rims primarily intended for passenger cars.
Passenger car tyres and rims - Part 2: Rims
This document specifies requirements for the use, general maintenance and safety of wheels and rims including multi-piece wheels and rims. This document defines their out-of-service conditions, such as cracked, worn and bent wheels and rim components. It is applicable to wheels intended for use on road as defined in ISO 3833 and off road vehicles. This document does not include mopeds and motorcycles.
Road vehicles - Wheels and rims - Use, general maintenance and safety requirements and out-of-service conditions
Automobile parts -- Wheels -- Contours of rims
本文件规定了AMT重型商用车离合器总成(以下简称离合器),包括离合器盖总成(以下简称盖总成)和离合器盘总成(以下简称盘总成)的基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存及质量承诺。 本文件适用于φ380 mm及以上规格的AMT重型商用车干摩擦式离合器,其它自动控制的干摩擦式离合器亦可参照采用。
Automated manual transmission heavy commercial vehicle clutch assembly
Commercial vehicles and buses-Cross-tooth gearbox flanges, type T
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号